CRYSTORAMA BRY8004BF Bryant Four Light Chandelier in Black Forged Instruction Manual

CRYSTORAMA BRY8004BF Bryant Four Light Chandelier in Black Forged

Product Information

This product is a lighting fixture designed to provide illumination for various spaces. It has a hanging or ceiling installation option, depending on the user’s preference. The fixture is damp-rated, making it suitable for use in environments with high humidity.

The electrical components of this product must be installed by a licensed electrician in accordance with the National Electric Code and local electrical codes to ensure safety.

It requires four candelabra bulbs, with a recommended wattage of 40 watts and a maximum wattage of 60 watts. Frosted bulbs are recommended for optimal lighting, and LED bulbs can be used for extended periods.

Caution: This product contains lead, which is known to the state of California to cause cancer, birth defects, or reproductive harm. For more information, please visit www.P65Warnings.ca.gov.

Product Usage Instructions

For Hanging Installation:

1. Place the frame over the top of the banding ring, aligning the hole on the bracket with the hole on the banding. Secure it with machine screws.
2. Place the frame on a soft cloth-covered platform and lay two pieces of glass on the two adjacent cutouts of the frame. Hold the glass while aligning the holes on the metal strap with the holes on the frame. It is recommended to have two persons handle this step.
3. Decide the desired hanging height and cut the chain to the proper length.
4. Install the canopy onto the mounting bar and secure it with the screw collar loop ring.

For Ceiling Installation:

1. Follow steps 1-3 from the hanging installation instructions.
2. Remove the coupling by loosening the finial and hex nut.
3. Install the mounting bar onto the outlet box using two outlet box screws.
4. Install the canopy onto the mounting bar and secure it with the hex nut and finial.

Ensure that the power is turned off before performing any installation or maintenance tasks on the product.

ASSEMBLY INSTRUCTION MODEL# BRY-8004-BF

For Hanging

For Ceiling

All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.

You will need 4- Cand. Bulb 40 Watts Recommended 60 Watts Max. Frosted bulb is recommended!!
USE LED BULBS FOR EXTENDED USE
THE FIXTURE IS DAMP RATED

How to install For Hanging

1. Place the frame over the top of the banding ring by aligning the hole on the bracket with the hole on the banding.
2. Secure it with machine screws
3. Place the frame on a soft cloth covered platform and lay two pieces of glass on the two adjacent cut outs of the frame. Hold the glass while aligning the holes on the metal strap with the holes on the frame. Two persons handling is recommended for this step.
4. Install the end of the rod(without the tab) onto the canopy and secure with a nut. Repeat for all rods. Do not tighten the nut until the end of step #3.
5. Spread the rods out equally and align the holes at the tab of rod with holes in the banding ring. Secure the rods with flat head screws. Now the nuts inside the canopy can be tightened to secure the roads in place.
6. Place the plate over the top of the canopy and secure with the loop.
7. Install the mounting bar to the outlet box using two outlet box screws.
8. Decide the desired hanging height and cut the chain to the proper length.
9. Install the canopy onto the mounting bar and secure with the screw collar loop ring.

How to install For Ceiling

1. Step#1-3 are the same as above.
2. Remove the coupling by loosening the finial and hex nut.
3. Install the mounting bar onto the outlet box using two outlet box screws.
4. Install the canopy onto the mounting bar and secure with the nex nut and finial

WARNING: This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov

Part Number

• (1)-Mounting Hardware For Hanging
• (1)-Canopy For Hanging W5-1/2″XH1″(XSU8004BFCAN5.5IN)
• (1)-Chain;3.8MM(XSU8004BFCHA3.8MM)
• (1)-Mounting Hardware For Celling
• (1)-Canopy;W4-3/4″XH3/4″ (XSU8004BFCAN4.7INC)
• (4)-Rods (XSU8004BFSIDEROD)
• (8)-Flat head Screws
• (1)-Loop(XSU8004BFLOOP)
• (4)-Glass;W12-1/4″XH5-1/2″ (XSU8004GLA12.25IN)
• (8)-Machine Screws
• (4)- Bulb(Not Included)
• (1)- Finial(XSU8004BFFIN)
• (4)- Metal strap
• (1)- Plate
• (1)- Coupling
• (3)-Bracket
• (1)-Banding ring
• (1)-Frame
• (4)-Machine Screws

For Hanging

For Ceiling

References

• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>