Airpura F700 DLX Air Purifier Instruction Manual
- June 4, 2024
- Airpura
Table of Contents
F700 DLX Air Purifier
Instruction Manual
TO BEGIN USING YOUR AIRPORT
Inspect the exterior of your Airpura to verify there is no damage from
shipping.
If any damage is noted, please follow the instructions from the distributor
returns policy.
Wipe the unit with a damp cloth to remove any dust from packaging Plug the
unit into a regular grounded 110-volt outlet Turn on the unit to MAX and allow
it to run for at least 30 minutes Set the variable speed control to the level
you wish
The most efficient way to use your Airpura for regular air quality maintenance
is to run it at a low speed 24 hours a day 7 days a week.
Always maintain a humidity level of approximately 40% in your home to ensure
the unit is operating at optimal levels. When using a purifier with a
dehumidifier, keep the dehumidifier at least 6 feet away.
FILTER MAINTENANCE AND REPLACEMENT
The Prefilter
Can be vacuumed from the exterior of the unit once a month or more often.
Should be replaced at least after 12 months of use
To vacuum the Prefilter
Use the brush attachment on your vacuum cleaner
Vacuum slowly around the mesh surface of the filter chamber
IMPORTANT SAFETY NOTE
Please ensure the air purifier is turned OFF when plugging into a power
source.
Failure to do so may result in the motor potentially stalling and/or burning.
Technical specifications
Odors, airborne chemical control, and VOC control
26 lbs super enhanced impregnated activated Carbon
13″H x 13.25″OD x 7.5″ID
Particle removal
HepaBarrier
Carbon bed
3 in deep x 570 in2 surface
Air Flow 635 cfm
More cfm than any other home unit available
Prefilter
570 in2
x 1 in
Post particle filter
306 in2
Size
23 in x 15 in
Weight
49 lbs total
Watts
120 on high / 40 on low
Sound Level
30.2 db on low (at 6 feet)
63.0 db on high (635 cfm)
at test conditions
Air purifiers models and filter configurations
Prefilter
Alternates| Cotton Prefilter TarBarrier Prefilter