IRON DISPLAYS BACKDROP 10 Inch Tension Fabric Displays Instruction Manual
- June 1, 2024
- IRON DISPLAYS
Table of Contents
10′ Tension Fabric Displays
Assembly Guide
Included Pieces
- Top Corner Poles (x2)
- Top Pole (4 pieces)
- Bottom Pole (4 pieces)
- Bottom Corner Poles (x2)
- Fabric
- Plastic Hinge Connector
- Feet (x2)
- Left Pole (3 pieces)
- Right Pole (3 pieces)
- Vertical Middle Pole (4 pieces)
Instructions
STEP 1: Remove all pieces from your included carrying case and place on a
clean, flat surface. Make sure you have all the pieces listed above.
STEP 2: Assemble all the poles by connecting the corresponding numbers
together while pressing the snap button as shown below.
STEP 3: Continue to connect the poles as illustrated in the
image below.
STEP 4: Snap the completed
frame into the feet, then drape the fabric over the connected poles.
Using more than 1 display?
To connect 2 displays together, use the plastic hinge connector. Just clip
it on to a side pole and connect it to the other display’s side pole.
Storage & Care
To store your tension fabric display, put all the product pieces into the carrying case and place in a cool and dry indoor location. You can machine wash the fabric on your gentle cycle using mild detergent. We recommend tumble drying with no heat. Don’t dry clean or iron.