Yizhet LED Curtain Lights Instruction Manual

Yizhet LED Curtain Lights

Product Information

Specifications:

• Light Barrier Size: 2m x 2m
• Number of Chains: 10
• USB Input Voltage: DC5V 1A
• Power Consumption: 4.5W
• LED Quantity: 200 LEDs
• Waterproof Rating: IP65
• Operating Temperature: 30-40°C
• Length of USB Cable: 2m
• Length of String of Lights: 2x2m
• Interval Between Bulbs: 10cm

Usage Instructions:

Hanging the LED Curtain Light:

1. Find the horizontal wire and hang it before loosening the light strands.
2. Untangle the light strands effortlessly.
3. Use cable ties or adhesive hooks to fix the LED curtain light to the desired place.

Using the Remote Control:

• To adjust the brightness, press the “+” or “-” buttons on the remote control.
• To activate the timer function, press the “TIMER” button on the remote control.
  • The LED curtain light will blink twice to indicate that the timer mode has been turned on.
  • The lights will stay on for 6 hours and then automatically turn off for 18 hours.
  • Pressing the “TIMER” button again will turn off the timer mode (the lights will blink three times to indicate this).
• To select different light modes, use the remote control or the on/off switch on the USB base.

Achieving Desired Effect:
To achieve the effect shown in the picture, it is recommended to buy 2 strings of lights and use them together.

Cutting the Light String:
The horizontal suspended plastic wires cannot be cut, but the pendulous silver wire can be cut if needed.

Waterproof Usage:
The LED light curtain has an IP65 waterproof rating, making it suitable for both indoor and outdoor decoration.
It can be hung on ceilings, curtains, staircases, patios, and Christmas trees.
Note : The USB base is not waterproof, so ensure proper protection when using it outside.

FAQ:

1. Q: How can I hang the LED curtain light within minutes?
   A: Follow these steps:

2. Find the horizontal wire and hang it before loosening the light strands.

3. Untangle the light strands effortlessly.

4. Use cable ties or adhesive hooks to fix it to the desired place.

5. Q: Why is the remote control not working?
   A: Please check the following:

6. Ensure the battery is inserted properly.

7. Check if the insulator is pulled out.

8. Try replacing the battery with a new one and try again.

9. Q: How do I use the timer function?
   A: To use the timer function:

10. Press the “TIMER” button on the remote control.

11. The curtain lights will blink twice, indicating that the timer mode has been turned on.

12. The lights will automatically turn off after 6 hours and turn on again after 18 hours.

13. If you press the “TIMER” button again, the curtain lights will blink three times to indicate that the timer mode has been turned off.

14. Q: Can I cut the LED curtain light?
    A: The horizontal suspended plastic wires cannot be cut, but the pendulous silver wire can be cut if needed.

15. Q: Is the light string waterproof?
    A: Yes, the LED light curtain has an IP65 waterproof rating, making it suitable for both indoor and outdoor use. However, please note that the USB base is not waterproof, so take necessary precautions when using it outside.

Package List:

• 1x LED Light Curtain (2x2m)
• 1x Remote Control

Note : The curtains are not included. The LED curtain light is powered by a USB plug, and battery boxes are not included.

Technical Details

• 2m * 2m light barrier waterproof light curtain has 10 chains.
• USB input voltage: DC5V 1A
• Power consumption: 4.5W
• LED quantity: 200LEDs
• Waterproof: IP65
• Normal operating temperature: 30-40℃
• Length of USB cable: 2m
• Length of the string of lights: 2x2m
• The interval between bulbs: 10cm.

Timer & Dimmable:

• When you press the “TIMER” button on the remote control, the light will be on for 6 hours and off for 18 hours.
• Press “+” and “-” to adjust the brightness by remote control.

8 light modes:

• Combination, Waveform, Consecutive, Slowly brightening, Flashing, Slowly fading, Sparkling, Glowing. Different light effects are controlled by remote control or on / off switch on USB.

QA

• Q: How to hang it within minutes?
  A: 1.Find out the horizontal wire and hang it before loosening the light strands, then untangle them effortlessly. 2. use cable ties or adhesive hooks to fix it to the desired place.

• Q: Why does the remote control not work?
  A: Check if the battery is inserted properly and if the insulator is pulled out. Or replace it with a\ new battery and try again.

• Q: How do I use the timer function?
  A: Press the timer button on the remote control. The curtain lights will blink twice, doing so means the timer mode has been turned on, will turn off automatically after 6 hours and turn on automatically after 18 hours.
  Meanwhile, if you press the timer button, the curtain lights will blink three times to indicate that the timer mode has been turned off.

• Q: To achieve the effect like the picture？
  A: To achieve the effect as in the picture, we recommend you to buy 2 strings of lights each.

• Q: Can I cut it?
  A: Horizontal suspended plastic wires cannot be cut, but the pendulous silver wire can be cut.

• Q: Is the light string waterproof?
  A: The LED light curtain With IP65 waterproof performance, as decoration for indoor and outdoor,
  it can be hung on the ceiling, curtain, staircase, patio and Christmas tree.
  Note : The USB base is not waterproof. Pay attention to the protection when you use it outside.

Package List

• 1* LED light curtain 2x2m
• 1* Remote control
• The curtains are not included.

Note : Powered by USB plug, battery boxes not included!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>