Supcline SF401 TV Wall Mount Instruction Manual

Supcline SF401 TV Wall Mount

Product Information

Specifications

• Model: SF401
• Product Type: Studless TV Wall Mount
• VESA Compatibility: 400*400mm
• Warranty: 10 years

Product Usage Instructions

Step 1: Before Installation

Check the wall type

• Wood studs
• Drywall
• Solid concrete or brick walls

Check your TV VESA pattern

• Measure the four holes at the back of your TV.
• Max: 400mm (15.75 inches)
• Min: 75mm (2.95 inches)

Check max load

• DO NOT exceed the max load indicated (154), otherwise it may cause product damage or body injury.

Step 2: Assemble the Brackets and Bumpers to the TV

Select the right screws/washers/spacer rings

• According to the size and depth of the TV screw holes.

Figure out the suitable screw combination according to your TV

• Combination of screws and washers
• Combination of screws, washers, and spacer rings

Attach the brackets

Step 3: Install the Wall Plate on the Wall

Option A: Install on wood studs

• Only suitable for 8/12/16 spacing wood studs
• Use a stud finder to locate the wood studs. Mark the center line of the studs.

Option B: Install on drywall

Notes:

• All 18 steel nails must be securely tightened to prevent unwanted movement of the wall plate.
• Do not use wall anchors or tapping screws for this mounting option.
• Drywall must be of sound construction with no water damage.
• Do not mount to patches/seams areas, or uneven walls.
• The TV must be placed in the center of the wall plate.

Frequently Asked Questions (FAQ)

Q: What should I do if I have doubts during installation?
A: Please feel free to contact our Customer Service at supcline@126.com for assistance.

Q: Can I mount this product on a wood stud wall?
A: Yes, you can mount it on a wood stud wall, but make sure to check the stud spacing first before installation.

Q: What is the warranty period for this product?
A: This product comes with a 10-year warranty for your peace of mind.

Thank you for choosing Supcline! All our products come with 10 years warranty.
As a manufacturer, we strive to provide you with the highest quality products and services. If you have any issues during installation and use, please contact us at supcline@126.com.
We’re 24 hours available!

Warning!

Please read this instruction carefully before installation.
If you have any doubts, please feel free to contact our Customer Service at supcline@126.com.

• This product is designed for solid concrete/brick wall and drywall. For wood stud, please check the stud spacing fisrt before installation.
• The wall must be capable of supporting five times the weight of the TV and mount combined.
• The product contain small parts, do not swallow any accessories,it may cause choking hazard if swallowed.
• Incorrect installation may result in product damage or body injury. Supcline shall bear no responsibility for any damage or injury resulted from incorrect installation, incorrect assembly or misuse.

Tools Needed (Not Included)

Contained Parts and Hardwares

Before Installation

1. Check the wall type
2. Check your TV VESA pattern (Vesa=Horizontal x Vertical) Measure the four holes at the back of your TV.
3. Check max load

DO NOT exceed the max load indicated, otherwise it may cause product damage or body injury.

Assemble the Brackets and Bumpers to the TV

1. Select the right screws/washers/spacer rings according to the size and depth of the TV screw holes.

2. Figure out the suitable screw combination according to your TV
   Combination of screws and washers
   Combination of screws, washers and spacer rings

3. Attach the brackets

Install the Wall Plate on the Wall

Option A: Install on wood studs

Note: Only suit for 8″/12″/16″ spacing wood studs

Use a stud finder to locate the wood studs. Mark the center line of the studs.

Position the wall plate at desired height, lever it and mark the holes. Drill holes, then align the wall plate with drilled holes and install it.

Option B: Install on drywall

Notes: Read carefully before installation

1. Position the wall plate at desired height, tap a nail into a hole on one side.
2. Lever the wall plate and tap a nail into a hole on the other side.
3. Tap the remaining 16 nails from one side to the other.

Option C: Install on solid concrete/brick wall

Notes: Read carefully before installation

Hang the TV

1. Test the stability
2. Hang the TV on the wall plate

Hang the TV on the wall plate, then press forward. Make sure the safety latches are in the locked position so the TV is securely fastened to the wall plate.

Remove the TV

1. Pull the strap down to unclock the latches, then pull the bottom of TV away from the wall plate.
2. Lift the TV up and take it off.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>