ETHAN ALLEN 092011 Wesley Pharmacy Floor Lamp Instruction Manual
- June 12, 2024
- ETHAN ALLEN
Table of Contents
ETHAN ALLEN 092011 Wesley Pharmacy Floor Lamp
Product Information: Wesley Pharmacy Floor Lamp
The Wesley Pharmacy Floor Lamp is a high-quality lamp designed to provide
efficient lighting and enhance the ambiance of your
living space. It comes with a 1.5W LED T bulb included, ensuring energy
efficiency and long-lasting performance. The lamp features a plug cap for easy
installation and a sturdy construction for durability.
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, AND PERSONAL INJURY:
This lighting fixture is for indoor use only. This lamp is equipped with a
polarized plug. One plug blade is wider than the other. DO NOT MODIFY the plug
or power cord in any way. DO NOT EXCEED the recommended bulb wattage. Use only
the type of bulb specified. Keep flammable materials away from the bulb. DO
NOT OPEN the product or alter the wiring in any manner. If using an extension
cord, follow precautions provided with the power cord.
Use care when unpacking. Locate ALL THE PARTS INCLUDED before disposing of
packaging materials. Remove the silica gel packets from the socket before
plugging the lamp into an outlet.
Product Usage Instructions
Before beginning assembly, please review the following important safety instructions:
- Use care when unpacking the lamp to avoid any damage.
- Make sure to locate all the parts included before disposing of the packaging materials.
- Remove the silica gel packets from the socket before plugging the lamp into an outlet.
Assembly Procedure
Parts Included: (Refer to Figure on the Right)
A. Plug Cap
No tools are required for assembly. Follow the steps below:
- Install the included LED bulb into the socket.
- Remove the Plug Cap (A) to expose the socket.
Caring For and Cleaning Your Lamp
To ensure the longevity of your Wesley Pharmacy Floor Lamp, follow these care instructions:
- Wipe the lamp with a soft, dry cloth to remove any dust or debris.
- Avoid using cleaners or scouring pads, as they may cause damage to the lamp’s finish.
- Before changing the bulb, always unplug the lamp and allow the bulb to cool down.
Troubleshooting
If you encounter any issues with your lamp, refer to the troubleshooting guide below:
| Problem | Possible Causes | Correction |
|---|---|---|
| Bulb does not light | Bulb is burnt or damaged | Replace the bulb with a new |
one.
Bulb does not light| Power to lamp is off| Confirm that the power is on.
Bulb does not light| Lamp is not plugged in| Make sure the lamp is properly
plugged in.
If the troubleshooting steps do not resolve the issue, please contact your
local Ethan Allen Design Center for further assistance.
Remember to save these instructions for future reference.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>