PAKMOTORS PK 2BF2J-A9 A9 Car Ambient Lighting Instruction Manual
- June 1, 2024
- PAKMOTORS PK
Table of Contents
PAKMOTORS PK 2BF2J-A9 A9 Car Ambient Lighting
Product Information
Specifications:
- Compliance: Part 15 of FCC Rules
- Radiation Exposure Limits: FCC approved for uncontrolled environment
- Minimum Distance: 0cm between radiator and body
Product Usage Instructions
Safety Precautions:
- Do not make any changes or modifications to the device without explicit approval from the manufacturer.
- Ensure the device is operated in compliance with FCC rules to prevent harmful interference.
- Install and operate the equipment with a minimum distance of 0cm between the radiator and your body.
Installation:
- Place the device on a stable surface.
- Connect the necessary cables and power source as per the user manual.
- Ensure proper ventilation around the device.
Operation:
- Power on the device using the designated button.
- Follow the on-screen instructions for initial setup.
- Use the device according to its intended purpose.
Maintenance:
Regularly clean the device with a soft, dry cloth to prevent dust buildup.
Refer to the user manual for any specific maintenance requirements.
Frequently Asked Questions (FAQ)
-
Q: Can I modify the device without manufacturer approval?
A: No, any changes or modifications not approved by the manufacturer could void your authority to operate the equipment. -
Q: What should be the minimum distance between the device and my body?
A: The equipment should be operated with a minimum distance of 0cm between the radiator and your body as per FCC guidelines.
Installation Instructions
Before installation, please confirm whether the lamp and light guide can work properly.
Open the door and fix the light guide to the seam. Fix the tube and find the position inside the door.
Insert the photoconductive tube into the hole in the front door of the light source
Insert the light source into the host and reinstall the door panel.
Note: during the installation process, it is troublesome to walk the
line. You need to find a professional master to install It. For detailed
installation video, please scan the QR code on the right.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>