ETHAN ALLEN 098037 Audrina Art Deco Wall Sconce Instruction Manual

ETHAN ALLEN 098037 Audrina Art Deco Wall Sconce

Audrina Wall Sconce

The Audrina Wall Sconce is a stylish and functional lighting fixture that will enhance the ambiance of any room. This sconce is designed for direct-wired installation and it is recommended to be installed by a licensed electrician for safety reasons. Please read and follow the instructions carefully before starting the installation process.

Important Safety Instructions:

• Always read the instructions completely before starting the installation.
• Do not exceed the rated bulb wattage to prevent damage and fire hazards.
• Keep flammable materials away from bulbs.
• Do not open the product or alter the wiring in any manner.
• Ensure the power to the electrical junction box is turned off at the circuit breaker before installation.

Product Specifications:

• Weight: 3.75 lbs (8.27 kg)
• Light bulb(s) not included. Refer to the light fixture for bulb specification.

Tools Required for Installation:

• Screwdrivers
• Pliers
• Electrical Tape
• Wire Connectors
• Wire Cutters
• Adjustable Wrench

Parts Included:

Installation Procedure:

1. Shut off the main electrical supply from the main fuse box/circuit breaker.
2. Carefully unpack all fixture parts and hardware and lay them out on a clean work surface.
3. Use wire strippers to prepare the ends of the two wires, leaving about 1/2 inch of exposed wire for the wire connectors (H).
4. Inspect the fixture wires. The Neutral Fixture Wire (G) is white, the Hot Fixture Wire (F) is black, and the Ground Wire (E) is green.
5. Attach the Ground Wire (E) from the fixture to the Ground Junction Box Wire (C) with a wire connector (H).
6. Connect the Hot Fixture Wire (F) to the Hot Junction Box Wire (D) with a wire connector (H) and wrap the connection with electrical tape.
7. Tuck the wire connections neatly into the Junction Box (A).
8. Fix the Mounting Bracket (J) to the Junction Box (A) using the Mounting Screw (K).
9. Fix the Back Plate (M) to the Mounting Bracket (J) with the Knurled Nut (L).
10. Insert one (1) maximum 40W Type A light bulb (not included) into the socket. Do not exceed the specified wattage.
11. Insert the Harp (Q) into the Saddle.
12. Attach the Lamp Shade (O) to the Harp (Q) with the Finial (N).
13. Screw the Acrylic Rod (S) to the Lamp Arm (T).

Care Instructions:

1. Wipe with a soft, dry cloth.
2. Avoid using cleaners, harsh chemicals, scouring pads, etc., as they may damage the sconce finish.

Audrina Wall Sconce Assembly Instructions

09-8037

IMPORTANT SAFETY INSTRUCTIONS. READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING. We strongly recommend that all direct-wired lighting products be installed by a licensed electrician. Two people may be required for installation. DO NOT EXCEED the rated bulb wattage. Keep flammable materials away from bulbs. This light fixture is shipped with all internal wiring intact. Do not open the product or alter the wiring in any manner.
Installation requires an electrical junction box in the wall sufficient to support the weight of the light fixture. This fixture weighs: 3.75lbs. (8.27 kg).

WARNING: Be certain that the power to the electrical junction box is turned off at the circuit breaker before installation. Turning the power off at a light switch is not sufficient to prevent electrical shock.

CAUTION: Prior to installation, locate All INCLUDED PARTS before disposing of packaging materials.

TOOLS REQUIRED FOR INSTALLATION

Screwdrivers| Pliers
Electrical Tape| Wire Connectors
Wire Cutters| Adjustable Wrench

Note: Light bulb(s) are not included. See light fixture for bulb specification. Additional wiring supplies may be required

Parts Not Included:

Part| Qty.| Description
A| 1| Wall Outlet Junction Box
B| 1| Ground Junction Box Wire
C| 1| Hot Junction Box Wire
D| 1| Neutral Junction Box Wire
P| 1| Light Bulb

Parts Included (Refer to figure) :

Part| Qty.| Description
E| 1| Ground Wire
F| 1| Hot Fixture Wire
G| 1| Neutral Fixture Wire
H| 2| Wire Connectors
I| 1| Ground Screw
J| 1| Mounting Bracket
K| 2| Mounting Screw
L| 2| Knurled Nut
M| 1| Back Plate
N| 1| Finial
O| 1| Lamp Shade
Q| 1| Harp
R| 1| Socket
S| 1| Acrylic Rod
T| 1| Lamp Arm

INSTALLATION PROCEDURE

1. SHUT OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER.
2. Carefully unpack all fixture parts and hardware and lay them out on a clean work surface.
3. Use wire strippers to prepare the ends of the two wires so that there is about 1/2″ of exposed wire for the Wire Connectors (H).
4. Carefully inspect the fixture wires. The Neutral Fixture Wire (G) is white. The Hot Fixture Wire (F) is black, and the Ground Wire (E) is green.
5. Attach the Ground Wire (E) from the fixture to the Ground Junction Box Wire (C); it usually has green insulation around it or is bare wire. Fasten them together with a Wire Connector (H) and wrap the connection with electrical tape. Make sure that no wire strands are exposed. If your Junction Box (A) does not have a Ground Junction Box Wire (C), insert the Ground Screw (I) into the Mounting Bracket (J) where it’s marked “Ground”, and wrap the fixture’s bare ground wire around the Ground Screw (I). Tighten the screw to clamp the Ground Junction Box Wire (C) between the Ground Screw (I) head and the Mounting Bracket (J). It is imperative that the Junction Box (A) in your home be properly grounded.
6. Connect the Neutral Fixture Wire (G) to the Neutral Junction Box Wire (B); it usually has white insulation around it. Fasten them together with a plastic Wire Connector (H) and wrap the connection with electrical tape. Make sure that no wire strands are exposed.
7. Connect the Hot Fixture Wire (F) to Hot Junction Box Wire (D); it usually has black insulation around it. Fasten them together with a plastic Wire Connector (H) and wrap the connection with electrical tape. Make sure that no wire strands are exposed. Do not reverse the hot and neutral connections or safety will be compromised.
8. Gently tuck the wire connections neatly into the Junction Box (A).
9. Fix Mounting Bracket (J) to Junction Box (A) with Mounting Screw (K).
10. Fix Back Plate (M) to Mounting Bracket (J) with Knurled Nut (L).
11. Insert one (1) 40W-maximum Type A light bulb (not included) into the socket. Do not exceed the specified wattage.
12. Insert Harp (Q) into Saddle.
13. Fix Lamp Shade (O) to Harp (Q) with Finial (N).
14. Screw Acrylic Rod (S) to Lamp Arm (T).

Care Instructions

1. Wipe with a soft, dry cloth.
2. AVOID cleaners, harsh chemicals, scouring pads, etc. as these may cause damage to the sconce finish.

After troubleshooting, if the light fixture still does not work, contact your local Ethan Allen Design Center.

SAVE THESE INSTRUCTIONS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>