ETHAN ALLEN 9-6861B Margeaux Table Lamp User Guide
- June 12, 2024
- ETHAN ALLEN
Table of Contents
ETHAN ALLEN 9-6861B Margeaux Table Lamp
Product Information
- Product Name: Margeaux Table Lamp
- Model Number: 09-6861B
- Usage: Indoor use only
- Plug Type: Polarized plug with one blade wider than the other
- Recommended Bulb Wattage: Do not exceed the recommended wattage
- Bulb Type: Use only the specified type of bulb
- Cleaning Instructions: Wipe with a soft, dry cloth. Do not use cleaners or scouring pads. Unplug the lamp and allow the bulb to cool before changing it.
Product Usage Instructions
- Unpacking:
- Handle with care when unpacking and locate all the included parts before disposing of packaging materials.
- Assembly:
- No tools are required for assembly.
- Ensure that all parts are included as shown in Figure 1.
- Install the Harp Part A onto the Lamp Base Part B.
- Place the Shade Part C onto the Harp Part A.
- Attach the Shade Finial Part D onto the Harp Part A.
- Screw the Bulb into the Lamp Socket Part E.
- Remove the Plug Cap, Part F from the Plug.
- Troubleshooting:
- If the bulb does not light, it could be burnt out or damaged. Replace the bulb.
- Confirm that the power to the lamp is on and that it is properly plugged in.
- If the issue persists after troubleshooting, contact your local Ethan Allen Design Center.
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, AND PERSONAL INJURY:
This lighting fixture is for indoor use only. This lamp is equipped with a
polarized plug. One plug blade is wider than the other. DO NOT MODIFY the plug
or power cord in any way. DO NOT EXCEED the recommended bulb wattage. Use only
the type of bulb specified. Keep flammable materials away from bulb. DO NOT
OPEN the product or alter the wiring in any manner. Extension cord: Follow
precautions provided with power cord.
UNPACKING:
Use care when unpacking. Locate ALL PARTS INCLUDED before disposing of
packaging materials.
ASSEMBLY, CARE, AND TROUBLESHOOTING
Tools Required For Assembly: Tools are not required. Required: Light bulb is not included.
Parts Included:
- A. Harp: Harp styles may vary.
- B. Lamp Base.
- C. Shade: Shade may be packed in separate carton.
- D. Shade Finial.
- E. Lamp Socket (attached, no assembly required).
- F. Line Cord Plug.
Assembly Procedure:
- Install Harp Part A onto Lamp Base Part B.
- Install Shade Part C onto Harp Part A.
- Install Shade Finial Part D onto Harp Part A.
- Install Bulb into Lamp Socket Part E.
- Remove Plug Cap, Part F from Plug.
Caring for and Cleaning your lamp:
- To clean, wipe with a soft, dry cloth.
- DO NOT USE cleaners, scouring pads, etc.
- Unplug lamp and allow bulb to cool before changing bulb.
Troubleshooting:
| Problem | Possible cause: | Correct by: |
|---|---|---|
| Bulb does not light | Bulb is burnt out or damaged | Replace bulb |
| Power to lamp is off | Confirm power is on | |
| Lamp is not plugged in | Confirm lamp is plugged in |
In the event that the lighting fixture does not work after troubleshooting, contact your local Ethan Allen Design Center.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>