ETHAN ALLEN 096012 Tori Gold Lamp Instruction Manual
- June 12, 2024
- ETHAN ALLEN
Table of Contents
ETHAN ALLEN 096012 Tori Gold Lamp
Product Information
This TORI TABLE LAMP is a lighting fixture designed for indoor use only. It is equipped with a polarized plug, with one plug blade wider than the other. The lamp should not be modified in any way, and the recommended bulb wattage should not be exceeded. Only use the type of bulb specified. Keep flammable materials away from the bulb. Do not open the product or alter the wiring.
- Product Dimensions: Not specified
- Product Weight: Not specified
- Manufacturer: Ethan Allen Global, Inc.
Product Usage Instructions
Unpacking and Assembly
- Use care when unpacking the lamp. Locate all parts included before disposing of packing materials.
- Assembly Procedure:
- Put Harp (C) onto the iron lamp body (D).
- Place Shade (B) onto Harp (C).
- Secure with Finial (A).
Caring for and Cleaning your lamp
- To clean the lamp, wipe it with a soft dry cloth.
- Do not use cleaners, scouring pads, or any abrasive materials.
- Before changing the bulb, unplug the lamp and allow the bulb to cool.
Product Troubleshooting
- Problem: Bulb does not light
- Possible cause: Bulb is burnt out or damaged
- Correct by: Replace bulb
- Problem: Power to lamp is off
- Possible cause: Confirm power is on
- Problem: Lamp is not plugged in
- Possible cause: Confirm lamp is plugged in
If the lighting fixture still does not work after troubleshooting, please contact your local Ethan Allen Design Center.
@2016 Ethan Allen Global, Inc.
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, AND PERSONAL INJURY:
This lighting fixture is for indoor use only. This lamp is equipped with a
polarized plug. One plug blade is wider than the other. DO NOT MODIFY the plug
or power cord in any way. DO NOTEXCEED the recommended bulb wattage. Use only
the type of bulb specified. Keep flammable materials away from bulb. DO NOT
OPEN the product or alter the wiring in any manner. Extension cord: Follow
precautions provide with power cord.
UNPACKING
Use care when unpacking.Locate ALL PARTS INCLUDED before disposing of packing materials.
ASSEMBLY,CARE,AND TROUBLESHOOTING
- Tools Required For Assembly: Tools are not required.
- Required: Light bulb is not included.
Parts Included: Refer to Figure 1.
- A. Shade Finial.
- B. Shade.
- C. Harp.
- D. Lamp base
Assembly Procedure: Refer to Figure1.
- Unpack all parts from carton carefully.
- Put Harp (C) onto the iron lamp body (D).
- Place Shade (B) onto Harp (C)
- Secure with Finial (A).
Caring for and Cleaning your lamp:
- To clean, wipe with soft dry cloth.
- DO NOT USE cleaners, scouring pads, etc.
- Unplug lamp and allow bulb to cool before changing bulb.
Troubleshooting
| Problem: | Possible cause: | Correct by: |
|---|---|---|
| Bulb does not light | Bulb is burnt out or |
damage
| ****
Replace bulb
Power to lamp is off| Confirm power is on
Lamp is not plugged
in
| Confirm lamp is
plugged in