GE Profile PVW1030SWSS 30 Inch Wall Mount Range Hood Owner’s Manual
- August 14, 2024
- GE Profile
Table of Contents
PVW1030SWSS
GE® Profile 30″ Wall Mount Range Hood with Clean Air Sensing
FEATURES AND BENEFITS
Built-in Indoor Air Quality Sensors – Detects PM 1, 2.5, 4 & 10, volatile
organic compounds (VOCs), humidity, and temperature Adjustable 610 CFM Range
Hood Blower – Effectively removes smoke, cooking fumes, and odors from the
air, keeping your kitchen
fresh and clean
Built-in WiFi – Operate your smart range hood from your phone, for the
ultimate in-kitchen experience
Chef Connect – Synchronize your oven and kitchen hood so that it turns on
whenever the cooktop is activated, and the lights illuminate when any burner
is in use
Backlit Push Button Controls – Easily operate your range hood with push
buttons that are illuminated from behind, making them easy to locate and use,
even in low-light
4-Speed Fan – Customize to suit your cooking techniques. Whether simmering or
searing, your cooking environment stays comfortable
LED Hood Light – Provides a clear view of your cooktop while cooking
Convertible Venting Options – Select recirculating or external venting
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
INSTALLATION INFORMATION: Before installing, consult Use & Care/installation
instructions packed with product for current dimensional data.
INCLUDED ACCESSORIES
Non-return Damper (8″ round)
Grease Filters – 2 X Baffle
OPTIONAL ACCESSORIES
PX8DC1SWSS – 8(ft.) High Ceiling Duct Cover Kit
PX12DC1SWSS – 12(ft.) High Ceiling Duct Cover Kit
UXCN90 – Recirculation Kit (includes Charcoal Filter)
UXCF91 – Charcoal Filter (needed if used in recirculation mode)
The vent hood must be installed 24″ min. above the cooking surface. For
optimal performance, installing the hood more than 36″ above the cooking
surface is not recommended. The hood installation height above the cooking
surface depends upon the ceiling height. The telescopic duct cover conceals
the ductwork running from the top of the hood to the ceiling.
NOTE: Installation height should be measured from the cooking surface to
the lowest part of the hood. This hood may be installed onto a wall and vented
to the outdoors, or it can be installed for recirculating operation.
Recirculating parts are supplied separately as optional accessories.
For answers to your Monogram, Café™, GE Profile™ or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
Specification Revised 7/24
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>