nova AX3000 Mesh Wi-Fi 6 System User Guide
- June 14, 2024
- nova
Table of Contents
Dual-Band 802.11ax Outdoor Wireless AP
HMHS-ATO6US0G
Product Datasheet
VERSION1.0
Overview
WF-660AG is a dual-band 2×2 MU-MIMO 802.11ax outdoor Wi-Fi AP specifically
designed for high-density deployments in outdoor locations that demand
exceptional performance. With support for 802.11ax 2.4G/5G Wi-Fi access, WF-
660A offers aggregated data rates of up to 1,774Gbps. This enables you to
establish a high-speed and stable wireless network.
Built with enhanced transmission power and high-gain antenna, the WF-660AG
delivers the high throughput and reliable coverage required to keep everyone
connected. Its compatibility with most wireless terminals makes it easy to
establish a high-capacity Wi-Fi network, catering to diverse connectivity
needs.
Furthermore, this Wi-Fi AP features the Bluetooth 5.0 and GPS module, for
convenient device deployment and management by users.
The universal mount supports both wall and pole installation. It allows for
adjusting the installation angle based on the actual usage environment to
achieve optimal coverage effectiveness.
For developers, the WF-660AG offers support for Qualcomm’s QSDK and OpenWiFi
development platforms. This opens the door to streamlined software
development, thanks to standardized interfaces, well-defined APIs, and
preintegrated stacks, reducing complexities and enhancing reliability.
Additionally, OpenWiFi’s active community support provides valuable
troubleshooting assistance, ensuring a future-proof and cost-efficient
solution for innovative Wi-Fi applications.
Key Features
- Supports pole and wall mounting
- Supports 2.4G 2×2/ 40MHz Wi-Fi (802.11b/ g/ n/ ac/ ax), up to 574Mbps link rate
- Supports 5G 2×2/ 80MHz Wi-Fi(802.11a/ n/ ac/ ax), up to 1.2Gbps link rate
- Supports BLE 5.0
- Supports GPS
- 2 x Dual-band Integrated 120 directional antennas (5dBi@2.4G, 7dBi @5GHz)
- 1 x Integrated Bluetooth antenna
- 1 x 2.5GE WAN, with 802.3 at PoE (PD)
- 1x Reset Button
- 1x RBG LEDs for visual indication
- Supports OpenWiFi development platform
Specification
Item | WF-660AG |
---|---|
Dimension (W x D x H) | 260mm x 140mm x 71mm, without bracket |
Weight | 1500g, without bracket |
Installation | Pole and wall mounting |
LEDs | 1 x RBG LED (Software definition) |
Interface | 1 x 2.5GE WAN with 802.3 at PoE(PD) 1 x Reset botton |
Input Voltage | 42.5V-57VDC, 802.3 at PoE (PD) |
Power consumption | <25W |
Environmental Specification
Temperature| Operation: -40℃~+65℃ Storage: -40℃~+85℃
Operating Humidity| 5%~95% (non-condensing)
Elevations| 86kPa~106kPa altitude
Dustproof and Waterproof| IP67
** Compliance| • NRTL Listed 62368-1 (US & CA)
• CB with IEC/EN 62368-1 IEC 60950-22 (Basic safety certificate for worldwide
marketing)
• GB 9254 -2008(Class B of Product) EN55032 , EN55035, EN61000-4-3 Level 4;
EN61000-4-2, FCC Part 15B
• WEEE 2002/96/EC recyclable materials requirements
Item| WF-660AG
---|---
| ** • FCC DOC Part 15 Class B (US)
• FCC Part 15 Subpart C 15.247 (US)
• FCC Part 15 Subpart E 15.407 (US)
Reliability
** MTBF| > 300,000 Hours
Telcordia SR-332: Reliability Prediction Procedures for Electronic Equipment,
Issue 3, Method 1, Case 3. This is based on a GB/GC (Ground Benign,
Controlled) environment with a steady state condition at a 25ºC ambient
temperature. It does not account for software failures.
AFR| AFR (Annualized Failure Rate) < 1.5% (in continuous operation)
Chipset
SoC| Qualcomm chipset (IPQ6028)
Flash| 16MB Nor Flash and eMMC5.0 4BG
DDR| 512MB 16bit DDR4 memory
Wi-Fi Interface
** Operating frequency| 2.4G radio:2.4000GHz~2.4835GHz
5G radio:5.150~5.250,5.250~5.350,5.470~5.725, 5.725~5.850 GHz
Maximum Transmit power (per chain)| 2.4G radio:24dBm@MCS0; 21dBm@MCS7;
20dBm@MCS9; 19dBm@MCS11
5G radio:24dBm@MCS0; 21dBm@MCS7; 20dBm@MCS9; 18dBm@MCS11
Data Rate| 802.11b: 1, 2, 5.5, and 11Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, and 54Mbps
802.11a: 6, 9, 12, 18, 24, 36, 48 and 54Mb/s
802.11n: MCS0~MCS7
802.11ac: MCS0 ~ MCS9
| 802.11ax: MSC0 ~ MCS11
Receive Sensitivity
| 802.11g: -90dBm@6Mbps -74dBm@54Mbps
802.11n:| | HT20| HT40
---|---|---
MCS0/8/16| -90dBm| -87dBm
MCS7/15| -71dBm| -68dBm
802.11a: -90dBm@6Mbps
-74dBm@54Mbps
802.11ac:
VHT20 | VHT40 | VHT80 | |
---|---|---|---|
MCS0 | -90dBm | -87dBm | -84dBm |
MCS8 | -67dBm | -61dBm | -58dBm |
802.11ax: | HE20 | HE40 | |
--- | --- | --- | --- |
MCS0 | -90dBm | -87dBm | -84dBm |
MCS11 | -60dBm | -57dBm | -54dBm |
Antenna Pattern
(Directional Antennas) | | Frequency(MHz)| 2400~2500| 5150~5850
---|---|---
Polarization| Horizontal/Vertical| Horizontal/Vertical
Peak Gain(dBi)| 5 dBi| 7dBi
Efficiency (Avg)| >70%| >75%
Return Loss| 10dB| 10dB
Isolation| 20dB| 20dB
H-Beam Width| 120 degree| 120 degree
V-Beam Width| 60 degree| 60 degree
Federal Communications Commission (FCC) Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generate, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
RF exposure warning
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not
be collocated or operating in conjunction with any other antenna or
transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>