ETHAN ALLEN 09-6176 Capri Table Lamp Instruction Manual
- June 12, 2024
- ETHAN ALLEN
Table of Contents
ETHAN ALLEN 09-6176 Capri Table Lamp
Product Information
The ETHAN ALLEN 09-6176 Capri Table Lamp is a lighting fixture designed for indoor use only. It comes with a polarized plug, where one plug blade is wider than the other. The lamp should not be modified in any way, and the recommended bulb wattage should not be exceeded. Only use the specified type of bulb and keep flammable materials away from the bulb. Do not open the product or alter the wiring. If an extension cord is used, follow the precautions provided with the power cord.
Product Usage Instructions
- Unpacking: Carefully unpack the lamp, making sure to locate all the included parts before disposing of the packaging materials.
- Assembly: No tools are required for assembly. The required light bulb is not included. Follow the assembly procedure below:
- Install Harp Part A onto Lamp Base Part B.
- Install Shade Part C onto Harp Part A.
- Install Shade Finial Part D onto Harp Part A.
- Install Bulb into Lamp Socket Part E.
- Remove Plug Cap, Part F from Plug.
- Caring for and Cleaning your lamp:
- To clean, wipe with a soft, dry cloth.
- DO NOT USE cleaners, scouring pads, etc.
- Unplug the lamp and allow the bulb to cool before changing it.
- Troubleshooting:
- Problem: Bulb does not light
- Possible cause: Bulb is burnt out or damaged, Power to lamp is off, Lamp is not plugged in
- Correct by: Replace bulb, Confirm power is on, Confirm lamp is plugged in
In case the lighting fixture still does not work after troubleshooting, please contact your local Ethan Allen Design Center for assistance.
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, AND PERSONAL INJURY:
This lighting fixture is for indoor use only. This lamp is equipped with a
polarized plug. One plug blade is wider than the other. DO NOT MODIFY the plug
or power cord in any way. DO NOT EXCEED the recommended bulb wattage. Use only
the type of bulb specified. Keep flammable materials away from bulb. DO NOT
OPEN the product or alter the wiring in any manner. Extension cord: Follow
precautions provided with power cord.
UNPACKING:
Use care when unpacking. Locate ALL PARTS INCLUDED before disposing of
packaging materials.
ASSEMBLY, CARE, AND TROUBLESHOOTING
- Tools Required For Assembly: Tools are not required.
- Required: Light bulb is not included.
Parts Included: Refer to Figure 1.
- A. Harp: Harp styles may vary.
- B. Lamp Base.
- C. Shade: Shade may be packed in separate carton.
- D. Shade Finial.
- E. Lamp Socket (attached, no assembly required).
- F. Line Cord Plug.
Assembly Procedure: Refer to Figure 1.
- Install Harp Part A onto Lamp Base Part B.
- Install Shade Part C onto Harp Part A.
- Install Shade Finial Part D onto Harp Part A.
- Install Bulb into Lamp Socket Part E.
- Remove Plug Cap, Part F from Plug.
Caring for and Cleaning your lamp:
- To clean, wipe with a soft, dry cloth.
- DO NOT USE cleaners, scouring pads, etc.
- Unplug lamp and allow bulb to cool before changing bulb
Troubleshooting
In the event that the lighting fixture does not work after troubleshooting,
contact your local Ethan Allen Design Center.
SAVE THESE INSTRUCTIONS