CRYSTORAMA MIL8012BK Mila 12 Light Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA MIL8012BK Mila 12 Light Chandelier
Dimensions
WARNING
-
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
-
You will need 12- Candelabra Base Bulb 40 Watts recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE. The fixture is Dry rated.
-
Spread the folded arms.
HOW TO INSTALL
Place the fixture parts on a soft cloth-covered platform before installation of fixture.
- Pass the wire through the stem then screw the stem onto the frame.
- Decide the desired hanging height and adjust the chain to the correct length.
- Spread the arms out equally.
- Install the mounting bar onto the outlet box.
- Raise the fixture up and do the wire connection. Attach the canopy over the mounting bar and secure with collar ring.
- Put the Distributor box cover, metal spacer and nut on the frame in order then secure with finial.
- Dress the crystals as illustrated.
Crystal Sets
A. 1 Piece. (1)50mm Smooth Glass Ball
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.p65warnings.ca.gov
Part Numbers-For Hanging
- A. (2)-Wire Connector
- B. (1)-Mounting bar
- C. (2)-Mounting screw
- D. (1)-Washer
- E. (1)-Hex nut
- F. (1)-Thread nipple
- G. (1)-Canopy (W5″xH1″)-XSN8005BKCAN5IN
- H. (1)-Collar Ring
- I. (1)-Collar Loop
- J. (1)-Chain (4mmx72″)-XSN8005BKCHA5MM
- K. (1)-Fixture Loop ; H3.5″
- L. (1)-Stem;H23 3/4″-XSN8012BKSTEM23.75IN
- M. (12)-Candle Sleeve; H3 1/4″-XSN8005BKCDL3.25IN
- N. (4)-Upper Arms-XSN8012BKARM
- O. (8)-Lower Arms-XSN8012BKLARM
- P. (1)-Frame
- Q. (1)-Distributor box cover
- R. (1)-Metal spacer
- S. (1)-Nut
- T. (1)-Finial-XSN8005BKFIN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>