FEELWORLD D71 Plus Dual Rack Mount Monitor Instruction Manual
- June 12, 2024
- FEELWORLD
Table of Contents
FEELWORLD D71 Plus Dual Rack Mount Monitor
Product Information
The 7Dual Rack Mount Monitor is a versatile monitor designed for optimal use. Please read the user manual carefully to ensure the best performance and longevity of the product.
CAUTION:
- Please use the adapter attached in the accessory. If necessary, use a qualified adapter.
- Avoid storing or using the monitor in extremely cold, hot, or humid places.
- Keep the monitor away from strong light sources to ensure image quality and long-term use.
- Avoid heavy impacts or dropping the monitor onto the ground.
- Do not use chemical solutions to clean the product. Instead, wipe it with a clean soft cloth to maintain brightness.
- The monitor does not have adjustable components. Do not take it apart or repair it yourself to prevent damage.
Product Usage Instructions
Function Features:
- WaveformRGBYUVY Histogram: Focus Assist Function
- Screen Marker, Center Marker (cross mark) display setting
- Screen Marker: 80%, 85%, 90%, 93%, 96%, 2.35:1
- Image Freeze: Capture function to still the current picture
- Image Flip: H/V Flip, H Flip, V Flip of the image around flip
- Check Field: Switch among Mono, Red, Green, Blue
- P2P: Display mode that makes the resolution of the image consistent with the display of the physical resolution
- Aspect Ratio: Change the display to ratio Panorama (Auto, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, Full Screen)
- The image zoom function can set Zoom All, U/D Zoom, L/R Zoom
- Panel buttons (F1, F2) function custom settings
- LED backlight for brighter image display without flickering
- Front panel stereo earphone output
- Multiple signal output ports for flexible use
- Monitor menu and functions can be set through an Ethernet connection
Product Description:
Front Panel Features
- Tally indicator
- MENU: Menu button for entering/confirming
- Volume adjustment when menu is not displayed
- F1 and F2: Custom function shortcut buttons
- MODE: Input signal selection and confirmation
- Power Switch
- Earphone jack port
Rear Panel Features
- DC 12V Power Input: 4-pin XLR DC12V power input
- 3G/SDI IN (SDI serial data input) (optional OUT(SDI serial data output))
- CVBS IN (Composite video broadcast signal input) (OUT(Composite video broadcast signal output))
- AUDIO L/R (Audio signal left/right stereo input)
- HDMI IN/OUT (High definition multimedia interface input/output)
- USB Firmware update and LUT file importing port
- UPGRADE LAN IN: Ethernet LAN Connector
- TALLY indicator input port
Power Input Way
There are two ways to power the monitor:
Direct Plug-in DC Power Input Port Supply:
- Use DC5.5*2.1mm DC power plug
- Power input polarity must be observed as shown in the manual
- Use a qualified power supply with output power no less than 21W DC 9-24V
4 Pin XLR Interface Power Supply :
Polarity of the 4-pin XLR power input must be observed as shown in the manual to avoid damaging the monitor.
Product Description
Front Panel Features
Rear Panel Features
| ① | / | DC 12V Power Input |
|---|---|---|
| ② | / | 4-pin XLR DC12V power input |
| ③ | 3G/SDI |
(optional）
| IN (SDI serial data input) OUT(SDI serial data output)
---|---|---
④| CVBS| IN(Composite video broadcast signal input)
OUT(Composite video broadcast signal output)
⑤| AUDIO| L(Audio signal left stereo input)
R(Audio signal right stereo input）
⑥| HDMI| IN(High definition multimedia interface input) OUT(High
definition multimedia interface output)
⑦| USB UPGRADE| Firmware update,LUT file importing port
⑧| LAN IN| Ethernet LAN Connector
⑨| TALLY| TALLY indicator input port
Power Input Way
There are two ways of power supply to our monitor:
-
A. The direct plug-in DC power input port supply. Please use DC5.5*2.1m DC power plug, power input polarity as shown below:
Please use the qualified power supply with output power no less than 21W DC 9-24V. -
B. Via 4 pin XLR interface power supply
Polarity of the 4-pin XLR power input as shown below, please note the polarity
of the power input, otherwise it may damage monitor. 
TALLY Indicator Connection
GND port 5 and 8 is sharing
Ethernet Connection
Our monitor is equipped with Ethernet interface, and users can connect the PC
with our monitor through the Ethernet port. Users can use the software to
control the monitor and send their control and command to the specific
monitor, as follows:
Connect the LAN port on the back of the monitor to the network. After
connection, the monitor will display the same IP address with that device.
Get the control software: Download from the details page of D71PLUS or
D71PLUS-H from website
www.feelworld.cn
- Then, Input:
- Username: admin
- Password: 123456,
- Click Login In
After login in, Click: Add monitor
Input IP address (The same as the IP address displayed on the
monitor.)
Select the controlled monitor (number 0 control left monitor, number 1 control
right monitor)
Check: Connection Status,
If connected, the IP address will be displayed. e.g:
Then users can click the corresponding control bar to control and command the parameters
Control:
Function1:
Function2:
Menu Function Instruction
Functional Assist
Mark
Display
User
System
Support Signal Formats
| Signals | Support signal formats |
|---|---|
| Video | PAL/NTSC auto recognize |
| 480i /480p /576i /576p | |
| 720p(60/59.94/50/30/29/25/24/23.98） | |
| HDMI | 1080i(60/59.94/50） |
| 1080p(60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF) | |
| 4K UHD 3840×2160p (30/29.97/25/24/23.98 Hz) | |
| DCI 4K 4096×2160p (24Hz) | |
| --- | --- |
| 720p (60/59.94/50/30/29/25/24/23.98) | |
| SDI | 1080i (60/59.94/50) |
| 1080p(60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF) |
Parameters
| Panel Size | 7″ IPS LCD×2 |
|---|---|
| Resolution | 1920 × 1200 pixels |
| Dot Pitch | 0.078758(W) x 0.07875 (H)）mm |
| Aspect Ratio | 16:10 |
| Brightness | 450 cd/m² |
| Contrast | 1100:1 |
| Viewing Angle | 80°/80°(L/R) 80°/80°(U/D) |
| Backlight | LED |
| Input Voltage | DC 9～24V |
| Input Signal | 3G-SDI (optional), HDMI, Video, Audio(L/R) |
Output Signal
| 3G-SDI (optional), HDMI, Video, Stereo Headphone
Power Consumption| ≤ 21 W
Special Function| TALLY indicator
Working Temperature| – 10～60℃
Storage Temperature| – 30～70℃
Unit Size| 482.6 L × 130.0 H × 30.5 D mm
---|---
Unit Weight| ≈1890g
Trouble Shooting
If there is any problem when using the unit, please try following ways to inspect and solve. Please contact us if you still can not solve it or have other problems.
Without image display
◆ Video cable off or connect
incorrectly
| Check the quality of the cable, make
sure the correct input interface
---|---
◆ Without video signal input
| Check the signal source and output
interface connect is correct or not
◆ Monitor is not be powered
on
| Check whether the power is connected,
click “ ” button to confirm.
◆ Supply voltage instability
| The power adapter plug is poor
connected with the socket
◆ self-contained power
supply, polarity connect inversely
| ****
Reference “Power Input Way” and reconnect
Image/color display abnormal
| ◆ Video cable poor contact | Change the video cable, try again |
|---|
◆ Video signal interfered by
external environment
| Move to another environment to try again
◆ Video input signal
amplitude too low
| Check signal source video output, or
change signal source and have a try.
◆ Menu color saturation
adjustment closing
| Enter menu to check color, or reset to
factory settings
◆ Check Field set in mono or
black & white
| ****
Reset Check Field, back to the color
◆ Image deformation| Reset the image ratio
Earphone without sound
◆ Audio cable off or
connection properly
| Confirm connected with the
corresponding input port
---|---
◆ Volume adjustment was
closed
| Reset the volume control and adjust to a
proper position.
◆ HDMI cable poor
Connected
| Check the quality of cable, or change
cable and have a try
◆ No sound after switch
video signal
| Check whether there is an AUDIO signal input in AV Mode.
Remark:
- If there are still other problems, please contact with our related technical persons.
- If there are changes without prior notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>