CP electronics EBR-ELS RAPID Emergency Lighting Server Installation Guide
- June 12, 2024
- CP electronics
Table of Contents
CP Electronics EBR-ELS RAPID Emergency Lighting Server
Product Information
The RAPID Server with 19-inch Rack Mount Arrangement is a device designed for installing into a 19 IT rack. It is used as part of the RAPID lighting control system and is intended to operate autonomously using an unswitched power line. The device comes with a UK fused 3 pin power cable and is capable of connecting to the Ethernet network.
Technical Specifications
- Electrical Specifications: Input voltage: 100-240V AC, Input frequency: 50/60 Hz, Circuit protection: 3A fuse, Power rating: 65W
- Power Connection: The unit is supplied with a UK fused 3-pin nominal length 0.8m power cable with an IEC C5 socket.
- Mechanical Specifications: The rack mount kit occupies 2 U rack height space.
- Environmental Specifications: Operating temperature: 10 to 40 deg C, Storage temperature: -10 to 60 deg C, Humidity: 20% to 80% non-condensing
- Network Environment Specifications: Network Protocols and Ports used: Ethernet up to 1 Gigabit (RJ45 connection), Messaging Protocol: TCP 443, 30307 UDP 30304 SSH 22 Secure HTTPS over TLS v1.3
- Part numbers: Part code EBR-ELS, Description: RAPID emergency lighting server with 19 rack mount tray kit
Product Usage Instructions
Installation
- Insert the tray into the IT rack from the front.
- Secure the rack tray arrangement with 4 x M6 screws provided.
- If required, use captive nuts to fit into the slot of the client’s rack.
Power Connection
Connect the provided UK fused 3 pin power cable with an IEC C5 socket to the power supply unit. Ensure that the power connection is protected by an appropriate circuit protection device.
Network Connections
Connect the LAN port at the back of the processor unit with an RJ45 Cat5e or better cable to the Ethernet network deployed for the RAPID lighting control system.
Overview
19” IT rack mount tray arrangement
This instruction covers the rack mount tray arrangement for installing into a
19” IT rack.
IMPORTANT NOTICE! This device should be installed by a qualified electrician in accordance with the latest edition of the IET Wiring Regulations and any applicable Building Regulations.
Installation
Insert tray to IT rack
Install the rack tray arrangement from the front of the client’s 19” rack and
secure with 4 x M6 screws provided. Use captive nuts to fit into the slot of
the client’s rack if required.
The rack mount kit occupies 2 U rack height space.
Power connection
The unit is supplied with a UK fused 3 pin nominal length 0.8m power cable
with an IEC C5 socket to connect to the power supply unit. This is intended to
operate autonomously using an unswitched power line.
Should the user apply alternative means of power connection, ensure that this
is protected by an appropriate circuit protection device.
Network Connections
Connect the LAN port at the back of the processor unit with RJ45 Cat5e or better cable to the Ethernet network deployed for the RAPID lighting control system.
Technical data
Electrical Specifications
| Electrical Specifications | Input voltage | 100- 240V AC |
|---|---|---|
| Input frequency | 50/60 Hz | |
| Circuit protection | 3A fuse | |
| Power rating | 65W | |
| Power connection | UK 3 pin plug on 0.8m lead or IEC C5 socket |
Mechanical Specifications
| Mechanical Specifications | Colour | Black |
|---|---|---|
| Material | Mounting tray – steel (1.2mm) | |
| Dimension | 2U height 19” rack standard |
530mm width x 115mm high x 225mm deep
Weight| 3kg
Environmental Specifications
| Environment Specifications | Operating temperature | 10 to 40 deg C |
|---|---|---|
| Storage temperature | -10 to 60 deg C | |
| Humidity | 20% to 80% non-condensing | |
| Compliance | **** |
Network Environment Specifications
| Network Environment | Network | Ethernet up to 1 Gigabit (RJ45 connection) |
|---|---|---|
| Specifications | Protocols and Ports used | TCP 443, 30307 |
UDP 30304
SSH 22
Messaging Protocol| Secure HTTPS over TLS v1.3
Part Numbers
| Part code | Description |
|---|---|
| EBR-ELS | RAPID emergency lighting server with 19” rack mount tray kit. |
CP Electronics – a business unit of
Legrand Electric Limited
Brent Crescent, London NW10 7XR
Tel: +44 (0)333 900 0671
Fax : +44 (0)333 900 0674
www.cpelectronics.co.uk
enquiry@cpelectronics.co.uk
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>