Arenti VBELL 1 Wireless Doorbell User Guide

June 12, 2024
Arenti

Arenti VBELL 1 Wireless Doorbell

Packing list

Arenti-VBELL-1-Wireless-Doorbell-FIG-1

  • The bracket is attached to the camera.

Product description

  1. Microphone

  2. Lens

  3. PIR

  4. Doorbell button

  5. Speaker

  6. LED indicator

  7. SD card slot

  8. Reset

  9. DC5V USB

  10. Device ON/OFF

  11. LED indicator

  12. Speaker

  13. Ringtone

  14. Volume

  15. Function button

  16. Micro USB

Notice

  • To reset the device, press and hold the reset button for 5s.
  • The camera beeps when the operation is complete.
  • LED indicator of a camera:
Flashing red light (slow) Wait for the network config
Flashing red light (fast) Connecting the network
Fixed red light Network is malfunction
Fixed blue light The camera is working correctly

LED indicator of chime:

Flashing red light Wait for pairing
Fixed blue light Succeed to pair

Installation

Installation with screws

Arenti-VBELL-1-Wireless-Doorbell-FIG-4

  1. Fix the bracket to the wall with the mounting screws.
  2. Install the camera in the bracket and lock it with the screw.

Installation with 3M stickers

Arenti-VBELL-1-Wireless-Doorbell-FIG-5

  1. Lock the bracket to the camera with the screw at the bottom.
  2. Stick the adhesive tapes to the bracket.
  3. Stick the other side of adhensive tapes to the wall.

Product Configuration

  • Step 1 Turn on your camera.
  • Step 2 Connect your smartphone to the Wi-Fi network.
  • Step 3 Download the Arenti app from the App Store or Google Play depending on your device.
  • Step 4 Launch the App and sign up for the first use.
  • Step 5 Follow the on-screen instructions to add your camera.

F o r m o re information, scan the QR code.

Arenti-VBELL-1-Wireless-Doorbell-FIG-6

Notice

  • If you have multiple cameras, please follow step 5 again to add devices one by one.
  • To change the Wi-Fi network, please restore the camera to factory settings and follow step 5 to add the camera.

Chime Pairing

  1. Short press (within 2 seconds), the status light flashes red slowly and the chime will be in pairing mode.
  2. Press the doorbell button to pair, when the chime status light turns off, the song will play automatically, the chime pairing is successful at this time.

Description

  1.  The chime can connect to a maximum of eight doorbells.
  2. When the chime is in pairing mode, press the. again (within 2 seconds), the chime will automatically exit the pairing mode.
  3. After adding the chime successfully, the volume will be adjusted to the maximum automatically. When it is at the minimum volume, it will return to the maximum volume after pressing ” *.
  4. Each press ‘ ‘, will play the next song along with a blinking blue light.

Specifications

Sensor to 1/2.7″ CMOS
M i n. briQhtness Color 0.0, Lux@F1.2
Black and white 0.001Lux@F1.2
Resolution 3 Megapixels
Lens 3.2 mm F2.0
Shutter 1/25-1/100,000 per second
Infrared High-power LED with ICR
Infrared d i stance 5 meters
FOV 130°
V i deo compress i on H.264
Bit rate 32Kbps – 2Mbps
Max resolution 2304 X 1296
Framerate 1 -25 per second
Picture sett in gs Support HD/SD; support flip
Storage SD card ( Max 128GB)
Audio Two-way audio
Protocols HTTP, DHCP. DNS
WiFi standard IEEE802.11b/g/n
Frequency 2412-2462MHz/433.92MHz(SRD)
WiFi encryption WPA-PSK/WPA2-PSK
Security AES128
Working temperature -20’C-50’C
Power DC5V,1A
Consumpt i on 4.5W MAX
Size(mm) 143x57x36
Battery 6700mAh
Standby consumption 200µA (average)
Work consumption 220mA (IR off)
Standby time Working 10 months
time 3 months ( 1 0timeswakeupperday )
PIR Detection Range 7m ( Max . )
PIR Detection Ang(e 100°

Legal notice

Support:   www.arenti.com.

Symbols

  • Direct current (DC)
  • Don’t throw batteries or out-of-order products with household waste (garbage). The dangerous – substances that they are likely to include may harm health or the environment. Make your retailer take back these products or use the selective collection of garbage proposed by your city.
  • Hereby, Arenti, declares that the radio equipment ~ type ‘VBell 1’ is in compliance with Directive 2014/53/EU The full text of the EU declaration of conformity is available at the following Internet address: www.arenti.com.
  • For indoor use only.

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no- collocation statement.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals