xtool TS100 UNI Sensor metal cycle valve User Manual
- June 12, 2024
- XTOOL
Table of Contents
Web: www.xtooltech.com
Programmable universal
tire pressure sensor
TS100 Uni-Sensor (Metal Cycle Valve)1-Sensor
TS100 UNI Sensor metal cycle valve
Attention: Before use the Xtool TS100 tire pressure sensor, must use
Xtool tire pressure programming device to program first, suggest finishing
programming before install tires.
When driving the vehicle which is equipped with this type of tire pressure
sensor suggest maintaining vehicle driving speed≤240km/h.
Security guidance
Before install TS100 tire pressure sensor, please reading this security instruction. As the reason of security and optimized operation, we suggest all of the maintaining and repairing work only trained personnel according to vehicle manufacturer guiding principle to operate. Cycle valve is related to vehicle security parts, use only for professional installation, otherwise it may be result in TPMS tire pressure sensor damage. If the product appear error or incorrect installation, Shenzhen Xtooltech Co., Ltd do not undertake any responsible.
Attention
- TS100 tire sensor module is equipped with tire pressure monitor system vehicle of leave factory replaceable and maintaining parts.
- Make sure using Xtool tire pressure sensor programming tool before install via select specific vehicle series, vehicle type and the year of manufacture to program TS100 tire pressure sensor.
- Please do not install TPMS tire pressure sensor into the broken tire which have programmed.
- In order to guarantee optimum performance, please do not install cycle valve and parts which are not belong to Xtool on Xtool TS100 tire pressure sensor.
- After finish installation, according to original vehicle manufacturer user guide steps to test vehicle TPMS to confirm correct installation.
Warranty repair
Shenzhen Xtooltech Co., Ltd Hereinafter referred to as “Company”) promise to all this product original retail buyers, since the day of delivery and under two years or under 40000 km, if in the case of normal use, this product or any parts is confirm that exist material or the flaw of craft aspect result in device breakdown, via proof of purchase, company will as the circumstances may require free of charge for you to repair or replace New product or parts) .Because the product misuse, misoperation or rig up error bring about additional damage or indirect damage, company assume no responsibility.
This warranty repair is not adjust to following situations:
- Product rig up error;
- Misuse;
- Because crash or tire defect bring about product damage;
- Racing or other unconventional use bring about product damage ；
- Over the specific use restriction of product.
TS100 tire pressure sensor detail sketch
TS100 tire pressure sensor technical parameters
TS100 tire pressure sensor weight
(Do not contain cycle valve）| 13.8 g
---|---
Boundary dimension| About 46.42516.2mm
Maximum pressure| 900 kPa
Attention
Every time tire servicing or teardown or TS100 tire pressure sensor teardown
or replace, must use our parts to replace rubber washer, washer, nut and valve
core, make sure sealing good.
If it is external damage, must replace TS100 tire pressure sensor.
Correct TS100 tire pressure sensor nut torque ：4Nm 。
Installation guide
Significance: before install TS100 tire pressure sensor, please read this instruction carefully, please pay special attention to safety warning and announcements of this instruction. Please according to this instruction to use TS100 tire pressure sensor correctly, otherwise may be result in TS100 damage or personal injury, and make the warranty repair lose efficacy.
1. Loosen tire
Take down valve cap and valve core ，deflate the tire.
Use wind pressure shovel to strip tire rubber cover tire away from rim.
Attention: please let the cycle valve via 180°face to wind pressure shovel.
2. Unload tire
Let the tire clamp on tire changer, adjust cycle valve to relative to tire
separated plug 1 o’clock location, insert tire tool and lift the tire bead on
installation plug to remove tire bead.
Attention: In the whole removal process must abide by this beginning location.
3. Remove TS100 tire pressure sensor
Remove the valve cap, nut, washer from cycle valve rod, then remove TS100
tire pressure sensor module from rim.
- Install TS100 tire pressure sensor and cycle valve
Step1. Connect cycle valve and TS100 tire pressure sensor subject firmly.
Attention: Make sure module connect firmly.
Step2. Remove the valve cap, nut and washer from cycle valve.
Step3. Valve rod across the valve opening, let TS100 tire pressure sensor located in rim interior, assemble washer, nut on valve rod fist and last.
Step4. Use 4.0 N•m torque screw up nut, then assemble bonnet back on valve rod.
5. Install tire
Put tire on the rim, make sure cycle valve via 180°face to separated plug ,
install tire on the rim.
Attention: Should abide by change tire machine manufacturer instruction to install tire on rim.
Web: www.xtooltech.com
Programmable universal
tire pressure sensor
TS100 Uni-Sensor ( Rubber cycle valve )1-Sensor
Attention: Before use Xtool TS100 tire pressure sensor must use Xtool tire pressure device to program, suggest finish programming before tire mounting. When driving the vehicle which is equipped with this type of tire pressure sensor, suggest maintaining vehicle driving speeds210km/h.
Security guidance
Before install TS100 tire pressure sensor please reading this security
instruction. As the reason of security and optimized operation we suggest all
of the maintaining and repairing work only trained personnel according to
vehicle manufacturer guiding principle to operate. Cycle valve is related to
vehicle security partsuse only for professional installation otherwise it may
be result in TPMS tire pressure sensor damage. If the product appear error or
incorrect installation Shenzhen Xtooltech Co., Ltd do not undertake any
responsible.
Attention
- TS100 tire sensor module is equipped with tire pressure monitor system vehicle of leave factory replaceable and maintaining parts.b
- Make sure using Xtool tire pressure sensor programming tool before installvia select specific vehicle series vehicle type and the year of manufacture to program TS100 tire pressure sensor.
- Please do not install TPMS tire pressure sensor into the broken tire which have programmed.
- In order to guarantee optimum performance please do not install cycle valve and parts which are not belong to Xtool on Xtool TS100 tire pressure sensor.
- After finish installation according to original vehicle manufacturer user guide steps to test vehicle TPMS to confirm correct installation.
Warranty repair
Shenzhen Xtool tech Co., Ltd (Hereinafter referred to as “Company”) promise to
all this product original retail buyerssince the day of delivery and under two
years or under 40000 km if in the case of normal use this product or any parts
is confirm that exist material or the flaw of craft aspect result in device
break down via proof of purchase company will as the circumstances may require
free of charge for you to repair or replacec New product or parts. Because the
product misuseamis operation or rig up error bring about additional damage or
indirect damage company assume no responsibility.
This warranty repair is not adjust to following situations:
- Product rig up error;
- Misuse;
- Because crash or tire defect bring about product damage;
- Racing or other unconventional use bring about product damage
- Over the specific use restriction of product.
TS100 tire pressure sensor detail sketch
TS100 tire pressure sensor detail sketch
| Without cycle valve TS100 tire pressure sensor weight | 13.8 g |
|---|---|
| Boundary dimension | About 46.42516.2mm |
| Maximum pressure | 900 kPa |
Attention
Every time tire servicing or teardown or TS100 tire pressure sensor teardown
or replace must use our parts to replace rubber washera washeranut and valve
coremake sure sealing good. Please avoid extreme temperature.
Installation guide
Significance: before install TS100 tire pressure sensor please read this
instruction carefully please pay special attention to safety warning and
announcements of this instruction. Please via this instruction to use TS100
tire pressure sensor correctly otherwise may be result in TS100 damage or
personal injury and make the warranty repair lose efficacy.
-
Loosen tire
Remove bonnet and core and deflate the tire. Use bead loose actuator unload tire bead.
Attention Lock washer must face to cycle valve.
-
Unload tire
Clamp the tire on tire changerand it is relative to tire separated plug in 1o’clock location to adjust cycle valve.
Insert tire tool and lift tire bead on installation plug to unload tire bead.
Attention: In the whole removal process must abide by this beginning location. -
Unload TS100 tire pressure sensor
Screw out the screw at the end of rubber valve rod fetch the sensor subject carefully. Carve up rubber snap joint and connect a standard cycle valve extractor to rubber valve according to pull the margin to unload cycle valve from valve clack. -
Install TS100 tire pressure sensor and cycle valve
Step 1. Tighten the screws to connect the cycle valve and sensor subject firmly. Paint grease or lubricating oil on rubber valve rod.
Step 2. Insert the valve rod into valve opening from rim interior and connect a standard valve cycle extractor to the end of valve rod.
Step 3. Pull the valve rod to stuck on the valve opening firmly then assemble the bonnet back on valve rod.
Attention: cycle valve and margin opening should be concentric.
-
Install tire
Put the tire on the rim make sure cycle valve via 180°face to separated plug. Install the tire on the rim.
Attention Should use change tire machine manufacturer instruction to install tire on rim.