ONFORU ON-GY03-RGBW-US-3 Smart LED Bulb User Guide

June 12, 2024
ONFORU

ONFORU ON-GY03-RGBW-US-3 Smart LED Bulb User Guide

ONFORU ON-GY03-RGBW-US-3 Smart LED Bulb User Guide

ONFORU Smart LED Bulb User Guide

Congratulations of your purchase of the ONFORU Smart LED Bulb. We encourage you to read all safety information and instructions before your primary installation of this product.

The ONFORU Smart LED Bulb is compatible with both Amazon Alexa and Google Assistant upon initial installation and pairing of the “Smart Life” App. The “Smart Life” App. can then be connected to Amazon Alexa or Google Assistant allowing “Voice Control Functionality”.

SECTION I – GENERAL MATTERS FOR ATTENTION

  1. This smart LED bulb can only support 2.4 GHz network and cannot work with 5.0 GHz network.
    Please check if your home network is 2.4 GHz and make sure that your phone has been

  2. connected to your Wi-Fi network. Please ensure your network is not hidden.
    If you fail to connect the bulb with your Wi-Fi, please check whether your network is stable

  3. and fast. Slow networking speed may result in failure of connection.
    If you fail to connect the bulb with your Wi-Fi, please ensure your Wi-Fi password is correct.

  4. If not, please re-enter the correct password.
    Wi-Fi Connection Issues
    If a router/Wi-Fi password changes or additional smart devices register with the “Smart Life”

  5. App., a factory reset of the ONFORU Smart LED Bulb is required.
    If any matters regarding Smart LED Bulb connection happens, you can reset the factory setting of ONFORU Smart LED Bulb, then re-connect the Smart Bulb.

Factory Reset Procedure

  1. Power on the LED Bulb.
  2. Turn ON/OFF the Smart Bulb three times until the Bulb starts to flash quickly, which indicates the success of the factory reset.
  3. Follow steps in Section II of the user manual to pair the LED Bulb with the “Smart Life” App.

PARAMETERS

ONFORU ON-GY03-RGBW-US-3 Smart LED Bulb - PARAMETERS

DIMENSION

ONFORU ON-GY03-RGBW-US-3 Smart LED Bulb - DIMENSION

SECTION II- PAIRING LIGHT BULB WITH”SMART LIFE” App.

Step 1

“Smart Life” App. installation.

There are 2 options for obtaining and installing the “Smart Life” App. on your smart device.

Option 1
Scan the QR code below

Option 2
Search for “Smart Life” in the App. Store or Google Play

Step 2

Enter the “Smart Life” App. and register an account and log in.

Registration

A. After entering the App., the App. will select the your current Country/Region automatically, and you can choose the Country/Region Manually as well.

ONFORU ON-GY03-RGBW-US-3 Smart LED Bulb - Enter your phone number or email,
Verification Code you received

Logging IN
If you already have an account for Smart Life App., Please select “Log in with existing account”.

A. After entering the App., the App. will select the your current Country/Region automatically, and you can choose the Country/Region manually.
B. Enter your phone number or email address with corresponding passwords to log in your account.

Note:
You will need your “Smart Life” App. username and password to pair with Amazon Alexa and/or Google Assistant.

Step 3

Add the bulb to Smart Life App.

Note: This smart LED bulb can only support 2.4 GHz network and cannot work with 5.0 GHz network.
Please check if your home network is 2.4 GHz and make sure that your phone has been connected to your Wi-Fi network. Please ensure your network is not hidden.

(1) Tap “+” button on top right corner to add device, then tap”lighting device” to enter next page.

ONFORU ON-GY03-RGBW-US-3 Smart LED Bulb - Tap plus button on top right
corner to add device

(2) Wi-Fi Network Configuration
Smart Life App. supports two kinds of Wi-Fi networks, Normal Mode and Access Points (AP) Mode. Normal mode is the defaulted option.
If your Wi-Fi signal is weak or slow, or if you can not pair the Smart Bulb with Smart Life App., you can choose to pair the Bulb via AP mode. In the AP mode, your equipment can only connect with one bulb each time.

ONFORU ON-GY03-RGBW-US-3 Smart LED Bulb - Wi-Fi Network
Configuration

How to pair the Bulb in 2 Modes.
Normal Mode Setting

  1. Power on the bulb with your own switch.
  2. Repeatedly turn ON/OFF the Bulb three times until the bulb flashes quickly.

ONFORU ON-GY03-RGBW-US-3 Smart LED Bulb - Tap the confirmation button, Enter
Wi-Fi password to join your network

Please Note:

a. This smart LED bulb can only support 2.4 GHz network and cannot work with 5.0 GHz network.
b. Please check if your home network is 2.4 GHz and make sure that your phone has been connected to your Wi-Fi network. Please ensure your network is not hidden.

5. Wait till it is successfully connected
Note: If the bulb is still flashing until the progress map reaches 100%, the pairing fails, and you will need to repeat the previous 4 steps to pair the Bulb.

AP Mode Setting

ONFORU ON-GY03-RGBW-US-3 Smart LED Bulb - AP Mode
Setting

4. When the Bulb is flashing quickly, repeatedly turn ON/OFF the Bulb three times until the Bulb flashes slowly (Approximately 3 seconds per time), then tap the confirmation button.

ONFORU ON-GY03-RGBW-US-3 Smart LED Bulb - When the Bulb is flashing quickly,
repeatedly turn ON OFF the Bulb three times

5. Enter Wi-Fi password to join your network and tap “Connect Now”.

ONFORU ON-GY03-RGBW-US-3 Smart LED Bulb - Enter Wi-Fi password to join your
network and tap Connect Now

6. Go to your phone Wi-Fi setting and connect the Wi-Fi named “SmartLife- xxxx”.

7. Go back to the App. page and wait till it is successfully connected.

ONFORU ON-GY03-RGBW-US-3 Smart LED Bulb - Go back to the App. page and wait
till it is successfully connected

Step 4
Name the bulb and tap “Done”. You will find the device you’ve named is shown on the App. homepage. Tap the device to enter the setting page.
Note: The name you give to the device will be the name for voice control on Amazon Alexa or Google Home later. For example, the device is named “Onforu smart bulb” in this user guide.

ONFORU ON-GY03-RGBW-US-3 Smart LED Bulb - Name the bulb and tap Done You
will find the device you’ve named is shown

After completing SECTION II, you can now control the light with Smart Life App. on this setting page.

ONFORU ON-GY03-RGBW-US-3 Smart LED Bulb - After completing SECTION II, you
can now control the light with Smart Life App

Note:
If you want to control the light with Amazon Alexa, please continue to read Section III.
If you want to control the light with Google Home, please skip Section II and read Section IV directly

SECTION III CONTROLLING LIGHT WITH AMAZON ALEXA

Please make sure that your Alexa App. is connected to Amaozn Echo, and both work together successfully under your Wi-Fi network.

ONFORU ON-GY03-RGBW-US-3 Smart LED Bulb - Please make sure that your Alexa
App. is connected to Amaozn Echo

Step B : Type “Smart Life” to search for “Smart Life”, and enable “Smart Life” on Alexa.

ONFORU ON-GY03-RGBW-US-3 Smart LED Bulb - Step B Type Smart Life to search
for Smart Life

Step C : Enter your account and password of Smart Life App., tap “Link Now”, then tap “Authorize” on the next page authorize Smart Life Info to Alexa.

ONFORU ON-GY03-RGBW-US-3 Smart LED Bulb - Step C Enter your account and
password of Smart Life App

Step D : Once your Smart Life account is successfully connected to Alexa, the following page will pop up. Tap “Done” on top left corner, then tap “DISCOVER DEVICES” on the next page.

ONFORU ON-GY03-RGBW-US-3 Smart LED Bulb - Step D Once your Smart Life
account is successfully connected to Alexa

Step E : Wait a few seconds for Alexa to detect the bulb from Smart Life App., and you will find the device named “Onforu Smart Bulb” has been paired to Alexa App. from Smart Life App.

After step E is done, you can now control the light with Alexa App. on this setting page.

ONFORU ON-GY03-RGBW-US-3 Smart LED Bulb - Step E Wait a few seconds for
Alexa to detect the bulb from Smart Life App

Step F : Now you are able to control the light via Amazon Alexa.

Try these commands and see what happens by asking Alexa :
Alexa, turn on “device name”
Alexa, turn off “device name”
Alexa, set “device name” to “color”
Alexa, set “devcie name” to “number”

For example:
“Alexa, turn on Onforu Smart Bulb”, “Alexa, dim Onforu Smart Bulb to 50%” etc.
Note: The device name is the one you give to the bulb on Smart Life App. In this user guide, the device is named “Onforu smart bulb”.
Note: If you also want to control the light with Google Home, You can continue to read Section IV and learn how to set up.

SECTION IV- CONTROLLING LIGHT WITH GOOGLE ASSISTANT

Step A : Open your Google Home App., tap “Home Control” on the Left Side Bar page.
Step B : Tap “+” button on the bottom right corner to enter next page.

ONFORU ON-GY03-RGBW-US-3 Smart LED Bulb - Step B Tap plus button on the
bottom right corner to enter next page

Step C : Find “Smart Life” from the side bar list.

ONFORU ON-GY03-RGBW-US-3 Smart LED Bulb - Step C Find Smart Life from the
side bar list

Step D : Enter your account and password of Smart Life App., tap “Link Now”, then tap “Authorize” on the next page to authorize your Smart Life Account Info to Google Home .

ONFORU ON-GY03-RGBW-US-3 Smart LED Bulb - Step D Enter your account and
password of Smart Life App

Step E : You will find that Google Home has found the device named “Onforu Smart Bulb” on this page.

ONFORU ON-GY03-RGBW-US-3 Smart LED Bulb - Step E You will find that Google
Home has found the device named

Step F : Now you are able to control the light via Google Home.

Try these commands and see what happens by asking Google :
ok, Google, turn on “device name”
ok, Google, turn off “device name”
ok, Google, set the “device name” to “color”
ok, Google, set “device name” to “number”

For example:
“ok Google, turn on Onforu smart bulb”, “ok Google, dim Onforu smart bulb To 50%” etc.

Note: The device name is the one you give to the bulb on Smart Life App. In this user guide, the device is named “Onforu smart bulb”.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
    Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
    This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body

Manufacturing Address:
Qian wan yi lu 1 hao A dong 201 shi qian hai shen gang he zuo qu
Shen Zhen Guang Gong
Tel: + 86 13532553168

Contact Address:
Dobranska 665, 332 09 Stenovice, Czech Republic
Tel : +420 773 266 098
Email: support@onforuled.com
www.onforuleds.com

CE, Rohs, disposal icon

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals