SW-MOTECH Yamaha YZF-R7 21 Tankring PRO Instruction Manual
- June 12, 2024
- SW-MOTECH
Table of Contents
SW-MOTECH Yamaha YZF-R7 21 Tankring PRO
Item No.: TRT.00.787.31800/B
Revision: 00
Date: 01 – 2022
PRO tank ring
FIDLOCK® licensed technology, pat.pend; No. 102019215277.5
Thank you for choosing this premium product from SW-MOTECH. Please carefully
read and understand all instructions, safety messages and warnings in this
mounting instructions prior to installation and use of this product to avoid
injury.
This product was developed for vehicles in their factory setting.
Compatibility with original accessory parts or other manufacturers’ accessory
parts is not guaranteed. Visit our webshop for additional information, such as
application charts and PDF mounting instructions. Any other documents that may
be required (e.g. ABE certifications), are also available for download at our
webshop. Keep these mounting instructions as reference.
SW-MOTECH assumes no liability for damage caused by improper installation
and/or maintenance work!
SAFETY ALERT SYMBOL
A This safety alert symbol is used throughout these mounting instructions to
warn of the possibility of death, bodily injury or other warnings. The words
DANGER, WARNING and CAUTION are used with this safety alert symbol to convey
important safety messages and information related to the installation and use
of this product. These words along with the safety alert symbol mean:
-
DANGER: Indicates a hazardous situation that, if not avoided, will result in death or serious injury!
-
WARNING: Indicates a hazardous situation that, if not avoided, could result in death or serious injury!
-
CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury!
-
NOTICE: Important information, but not death or injury related [property damage only)!
-
WARNING: The installation and/or maintenance of this product requires advanced mechanical skills, the proper tools, and a thorough understanding of tool use and torque specifications.
For your own safety, SW-MOTECH recommends having installation and/or maintenance carried out by a qualified and certified motorcycle mechanic. -
WARNING: Should you choose to self-install this product, carefully and completely read all installation and safety instructions before installation and use, and follow all the directions and safety precautions given in the mounting instructions to avoid serious injury or death. Also pay attention to all relevant information in the vehicle manual during installation and use. IF YOU DO NOT UNDERSTAND ANY PART OF THESE INSTRUCTIONS, OR NEED CLARIFICATION OF ANY INSTRUCTION, DO NOT ATTEMT TO MOUNT THIS PRODUCT WITHOUT CONTACTING SW-MOTECH FOR ASSISTANCE.
PREPARATION: Read the mounting instructions carefully and make sure that all items of the parts list are included. -
CAUTION: Make sure that your vehicle is parked safely and cannot fall over. Turn off the engine and remove the ignition key. Let the engine/exhaust cool off if necessary. Disconnect the vehicle battery when working on the electrical system. Use appropriate tools and wear always safety glasses and hand protection. Have another person help you.
MOUNTING: All parts and connections removed from the vehicle must be reinstalled in accordance with the vehicle manufacturer specifications or replaced by parts and hardware delivered by SW-MOTECH. -
WARNING: Secure all threads, unless otherwise specified, with medium strong strength liquid thread locker. Torque specifications undefined by SW-MOTECH must be obtained from the vehicle manufacturer or by a certified motorcycle workshop!
FUNCTION CHECK: After installation also make sure that no moving parts are obstructed, and function of the vehicle is not hindered in any way. Cables and hoses must not rub and/or be pinched. -
WARNING: Before starting to ride, perform a comprehen11ive check of all functions. After the first 50 km and then at regular intervals, check the tightening torque of all connection& and the proper fit of the product. installed accessories can change driving behavior/stability of the vehicle.
| Step | N o. | Item No. / Description | Part | Quantity | N·m’ |
|---|---|---|---|---|---|
| 011 | 1 | TRT. 00.787.900.04 | Tank Ring | 1 /1 | |
| (2) | TRT.0 0.787.900.07 | Mounting Ring | 1 /1 | ||
| (3) | M5 x 25 DIN 7991 | Countersunk Screw | 212 | 6 | |
| (4) | M5 x 30; ISO 7380 | Lenshead Screw | 212 | 6 | |
| (5) | 0 8 / 0 6,2 / h 9 | Spacer | 4 / 4 | ||
| (6) | TRT.0 0.787.022 | Sleeve Nut; black | 4 / 4 | 2 | |
| (7) | SST.0400.0220.0010.02 | Protection Strip | 3 13 | ||
8.8
Coarse Thread III I M4 M5 M6 I MS IM10 M12I
Stahl FK 8.8 / Steel CL 8.8 N·m I 2,8 5,5 9,6 I 23 I 46 79 I
10.9
Coarse Thread III I M4 M5 M6 MSIM10IM12
Stahl FK 10.9 / Steel CL 10.9 N·m I 4, 1 8,1 14 34 I 67 1115
MOUNTING
READ AND SAVE THESE MOUNTING INSTRUCTIONS
CAUTION: With some bike models, there may be contact between the mounting
ring (2) and the vehicles paintwork during assembly!
In this case, affix the protective strips (7) in the contact area of the
mounting ring (2).
SW-MOTECH assumes no liability for damage to the paintwork! 
WARNING: Always wear eye and hand protection!
WARNING: Always use appropriate tools!
Remove the original screws from the mounting points.
Attach the mounting ring (2) to the gas cap ring.
WARNING: Use liquid thread locker!
Then carefully attach the tank ring (1 I to the mounting ring (2). Using too
much pressure to tighten the sleeve nuts (6) can damage the tank ring.
WARNING: Use liquid thread locker!
Tighten the screws and sleeve nuts as specified.
CAUTION: AFTER installing the tank ring, make sure that the gas cap can be opened and closed WITHOUT restrictions!
NOTICE: Observe the country specific regulations concerning vehicle
registration/operation as well as TOV regulations if applicable.
If required, register installed parts in the vehicle documents through an
appropriate inspection authority.
Copyright by SW-MOTECH GmbH & Co. KG
Errors and omissions excepted. Technical and design modifications are subject to change.