HOME ACCENTS Holiday TG76M3ACDL19 Sparkling Amelia Pine Christmas Tree Instruction Manual

HOME ACCENTS Holiday TG76M3ACDL19 Sparkling Amelia Pine Christmas Tree

Product Information

The Christmas Tree Model is TG76M3ACDL19 and has a Sku # 1005 271 539. It comes with a tree top, tree center (Sticker 1 and Sticker 2), and a tree stand. The tree stand has foldable legs and a locking disk that snaps into place. This seasonal product is not intended for permanent installation or use and should not be placed near gas or electric heaters, fireplaces, candles, or other similar sources of heat. The wiring of the product should not be secured with staples or nails, or placed on sharp hooks or nails. The product should be unplugged when leaving the house, retiring for the night, or if left unattended.

Usage Instructions

Safety Information
Before using the product, read and follow all safety instructions. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. If used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation. To avoid the risk of fire, burns, or electric shock, do not let lamps rest on the supply cord or on any wire. This is an electrical product and not a toy!

Pre-Assembly
The package includes a tree top, tree center (Sticker 1 and Sticker 2), and a tree stand. Before assembly, ensure that all parts are included in the package.

Assembly

Assembling the tree stand:

1. Choose a location near a wall outlet.
2. Unfold the legs of the tree stand and lay the stand on the floor.
3. Slide the locking disk of the tree stand down until it snaps into place and insert the pole into the tree stand.

Assembling the tree:

1. Insert the lower tree section(s) into the tree stand.
2. Insert the upper tree section(s) to the lower section(s) until inserting the tree top.
3. Shape the branches to your preference by working from the bottom of the tree to the top.
4. When finished shaping the branches, slightly upsweep all branch tips for a uniform look.

Operation

Turning on the tree:

1. Connect the light strings of the tree together and plug the adapter into a wall outlet.
2. If the tree comes with a foot pedal, step on the On/Off button.

Maintenance

If any replacement or repair is needed, use the hinge pins and washers included in the package. If extra parts are needed, contact the Customer Service Team at 1-855-HDHoliday (1-855-434-6543) from 8am to 7pm EST, Monday through Friday, and 9am to 6pm EST,Saturday. In case of repairing loose hinges, place the branch into the slot of the bracket and insert a new hinge pin through the holes of the bracket and secure with a washer.

Troubleshooting

Problem: The tree does not light.

Solution: Ensure that all tree sections are plugged into each other and that the tree is plugged into the wall.
If your tree came with a foot pedal, step on the On/Off button.

Safety Information

IMPORTANT SAFETY INSTRUCTIONS

When using electrical products, basic precautions should always be followed, including the following:

• READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
•  Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
• This seasonal product is not intended for permanent installation or use.
• Do not mount or place the product near gas or electric heaters, fireplaces, candles, or other similar sources of heat.
• Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
• Do not let lamps rest on the supply cord or on any wire.
• Unplug the product when leaving the house, when retiring for the night, or if left unattended.
• This is an electric product and not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it.
• Do not use this product for other than its intended use.
• Do not hang ornaments or other objects from cord, wire, or light string.
• Do not close doors or windows on the product or extensions cords as this may damage the wire insulation.
• Do not cover the product with cloth, paper, or any material that is not a part of the product when in use.
• The lamps of this product are not replaceable. Do not attempt to change or modify the lamps.
• Read and follow all instructions that are on the product or provide with the product.
• SAVE THESE INSTRUCTIONS

Pre-Assembly

Package Contents

Assembly

Assembling the tree stand

Step 1. Choose a location near a wall outlet.

Step 2. Unfold the legs of the tree stand and lay the stand on the floor.

Step 3. Slide the locking disk of the tree stand down until it snaps into place.

Assembling the tree
This tree assmbles with Quick Set® feature —Set up and light up your tree in less than 10 minutes!

Step 1. Remove the protective caps from the tree bottom and insert the pole into the tree stand.

Step 2. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.

Step 3. Shape the branches to your preference by working from the bottom to the top. When adjusting branches, ensure that all wires are free of branch hinges.

Step 4. Insert the adapter into the wall outlet. All your lights should now be lit.

Step 5. Shape the tree from the bottom to the top. Start with the branches farthest from the pole – fan out in a star shape, and continue until the entire tree is shaped.

Step 6. When finished shaping the branches, slightly upsweep all branch tips for a uniform look.

Operation

Turning on the tree

Step 1. Connect the light strings of the tree together and plug the adapter into a wall outlet.

Step 2. If the tree comes with a foot pedal, step on the On/Off button.

Maintenance

Spare parts
This tree package includes hinge pins & washers for any replacement or repair that you need to perform on your tree. If extra parts are needed, contact the Customer Service Team at 1-855-HDHoliday (1-855-434-6543) from 8am to 7pm EST, Monday through Friday, and 9am to 6pm EST, Saturday.

Repairing Loose Hinges

Step 1. Place the branch into the slot of the bracket

Step 2. Insert a new hinge pin through the holes of the bracket and secure with a washer.

Use and Care Instructions

1. Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
2. Before disassembling the tree, unplug the tree and remove all ornaments and decorations.
3. Gently lift the tree top straight up to remove from the center section and fold all branches towards the pole.
4. Repeat this step for the center and bottom tree sections.
5. When storing the product, carefully remove the product from wherever it is placed, including tree, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires. Cover the protective cap on the poles to avoid damaging the internal parts.
6. When not in use, store neatly in a cool, dry location protected from sunlight.

CAUTION:
Use only power adapter that was provided with this product. Using a different power adapter will damage the lights and cause fire, electrical shock hazard.

Troubleshooting

other and that the tree is plugged into the wall. If your tree came with a foot pedal, step on the On/Off button.

NEED HELP? DO NOT RETURN TO STORE.
CALL: 1-855-HDHoliday (1-855-434-6543)
Monday – Friday 8am to 7pm EST, Saturday 9am to 6pm EST

Christmas Tree
Model: TG76M3ACDL19
Sku # 1005 271 539

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>