HOME ACCENTS Holiday 1007 660 933 2.5ft Yuletide Lane LED Husky User Guide
- October 30, 2023
- HOME ACCENTS Holiday
Table of Contents
1007 660 933 2.5ft Yuletide Lane LED Husky
User Guide
1007 660 933 2.5ft Yuletide Lane LED Husky
Thank you!
We appreciate the trust and confidence you have placed in Home Accents through
the purchase of this 2.5ft Yuletide Lane LED Husky. We strive to continually
create quality products designed to enhance your home. Visit us online to see
our full line of products available for your home improvement needs. Thank you
for choosing Home Accents!
1-855-HDHoliday (1-855-434-6543)
HOMEACCENTSHOLIDAY.COM
Parts List
Parts List
Locater| Name| Qty.
A| Hat / Head| 1
B| Half of Body| 2
C| Tail| 1
D| Leg| 4
E| Collar| 1
Hardware List
Locater| Name| Qty.
F| Spare Fuse| 2
G| Spare Bulb| 2
H| Plastic Tie| 15
I| Ground Stake| 4
USE AND CARE GUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many
parts are connected by the lighting string that runs throughout the item. Take
special care not to pull, cut or damage the lighting string. Read the entire
manual prior to assembly and identify all the parts included in the package
against the parts list. It is recommended to assemble parts of the product
while laying flat on the ground or table versus standing the item up to
assemble the parts. If any parts are missing or damaged do not attempt
assembly but contact our customer service center or return to place of
purchase with purchase receipt.
Assembly of this product may require more than one person.
1-855-HDHoliday (1-855-434-6543)
Pre-Operation
CAUTION: Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION: The lighting string on this product is rated at 4.8 Watts (0.04
Amps). Do not overload. Do not connect to another lighting string, decorative
outfit or other electrical products. Before you use or re-use this product
inspect it carefully. Discard or return to place of purchase with purchase
receipt if the product has cuts, damage, frayed wire insulation on cords,
cracks in the socket enclosures, loose connections, exposed copper wire or
other obvious damage.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to
avoid any undue strain or stress on the product connections, and wires. If the
product is placed somewhere other than the ground it should be well secured,
flat and stable.
b. Carefully disassemble the unit taking caution not to cut any electrical
wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Troubleshooting
a. Ensure that the floor or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power
Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days maximum per
year. This product is covered by a 90 days limited guarantee due to defects in
material and workmanship. Return the product with purchase receipts to the
location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products
not used in accordance with directions provided on or with the product, burn
out of bulbs or LEDS, batteries, products that have been subjected to
unauthorized repair and/or modification and damage caused by shipping and
improper handling, alterations, misuse, in store display models or accidents.
Questions, problems, missing parts? Before returning to the store, call Home
Accents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
1-855-HDHoliday (1-855-434-6543)
Diagram of Parts
ASSEMBLY
Assembling the Body
Align the two Halves of Body (B) with each other then insert the connecting
rods on one half into the connecting holes on the other half and fasten
atconnecting loops with Plastic Ties (H).
Assembling the Legs to the Body
Insert the connecting rods at the top of each Leg (D) into the connecting
holes on the underside of the Body (B) then fasten at the connecting loops
with Plastic Ties (H).
Assembling the Head
Insert the connecting rods on the bottom of Head (A) into the matching
connecting holes on the Body (B) and fasten at the connecting loops with
Plastic Ties (H).
Assembling the Tail to the Body
Insert the connecting rods on the bottom of Tail (C) into the matching
connecting holes on the Body (B) and fasten at the connecting loops with
Plastic Ties (H).
Assembling the Collar to the Body
Wrap the Collar (E) around the neck of the Dog and secure it with Velcro
fastener.
Assembling the Ground Stakes
Place the Ground Stakes (I) over the ground connecting loops at each paw then
into the ground firmly.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>