CRYSTORAMA 2112-AG Truax One Light Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA 2112-AG Truax One Light Chandelier
Product Information
The product is model #2112-AG from Crystorama. It is an electrical light fixture that requires installation by a licensed electrician in compliance with the National Electric Code and local electrical codes. The fixture requires a medium bulb with a recommended wattage of 40 watts and a maximum wattage of 60 watts. The bulb is not included, and LED bulbs are recommended for extended use. The product comes with mounting hardware, wire nut, wall anchor, anchor screw, screws, mounting plate, green ground screw, canopy, decorative nut, upper metal cap, lower metal cap, socket, metal band, ball nut, and glass shade. The glass shade is fragile and requires special handling.
Product Usage Instructions
It is recommended that two people complete the assembly of the fixture. Follow the below steps to install:
- Install the metal band onto the glass shade by resting the glass shade inside the foam block provided in the packaging. Hold the metal band straight while another person secures it on the glass with the screws provided.
- Unscrew the decorative nut.
- Install the bulb into the socket.
- Attach the lower metal cap and socket cluster into the glass shade.
- Attach the upper metal cap onto the glass shade and secure it using the decorative nut.
To handle the glass shade:
- Take off the glass from the package and remove the polybag.
- Place it horizontally on the EPS for metal ring assembly as shown in the sketch map.
The product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. Refer to www.P65Warnings.ca.gov for more information.
WARNING
- Electrical Danger
- Turn Power Off
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
You will need 1-Medium Bulb 40 Watts Recommended 60 Watts Max Bulb not included USE LED BULBS FOR EXTENDED USE This fixture is DRY rated.
How to Install
Assembly Instructions: Note it is strongly recommended that 2 people complete the assembly of this item.
- Install the metal band onto the glass shade (rest the glass shade inside the foam block included in the packaging. Hold the metal band straight while another person secures it on the glass with the screws provided).
- Unscrew the decorative nut.
- Install bulbs into the socket.
- Attach the lower metal cap and socket cluster into the glass shade.
- Attach the upper metal cap onto the glass shade and secure using the decorative nut.
How to handle glass
The glass hole is fragile, please assemble it according to the special instructions:
- Take off the glass from the package, remove the polybag, and place it horizontally on the EPS for metal ring assembly.
Sketch Map
WARNING:
This product can expose you to Lead, which is known to the State of California
to cause cancer and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov.
Part Numbers
- A. Mounting Hardware
- (3) Wire Nut
- (4) Wall anchor
- (4) Anchor screw
- (4) Screws
- (1) Mounting Plate
- (1) Green Ground Screw
- B. (1)Canopy;7″x7″x0.55″h;XMO2016AGCAN7IN
- C. (3)Rod;Ø0.63″x12″h;XMO2016AGROD12IN
- D. (1)Rod;Ø0.63″x3″h;XMO2016AGROD3IN
- E. (1)Decorative nut
- F. (1)Upper metal cap;XMO2112AGCAPUP
- G. (1)Lower metal cap;XMO2112AGCAPLOW
- H. (1)Socket
- I. (1)Metal band;XMO2112AGRING12IN
- J. (3)Ball nut
- K. (3)Screws
- L. (1)Glass shade; XMO2112GLA12IN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>