3MK Fuego 30W Bluetooth 5.3 TWS Wireless Speaker User Manual
- May 15, 2024
- 3mk
Table of Contents
User manual
Package List
Diagram
- Tws/EQ
- Volume- Previous track
- Type.C charging port
- Power/Bluetooth indcatorght
- Pause/play
- olume+/Next rack
- power button
Turning the device on/off
Turning the device on/off
To turn the device on/off, press and hold the power button for 2 seconds. The
BT connection will be automatically terminated within 30 minutes after music
playback is over.
The device will automatically turn off within 10 minutes of no BT connection.
Bluetooth connection
BT connection
Place the speaker at a distance of less than 1 m from the device. Press and
hold the power button for 2 seconds. The BT indicator will blink blue while
connecting and will glow solid blue when the BT connection is established.
Play/pause and volume control
Play / Pause and Volume control
To start or stop playback press the Play/Pause button once. To turn up the
volume, press
the Volume up/Next track button. To turn down the volume, press the Volume
down/
Previous track button. To switch to the next audio track, press and hold the
Volume up/
Next track button. To switch to the previous audio track, press and hold the
Volume down/
Previous track button.
Equalizer modes
Equalizer modes
Press the TWS pairing/Switching equalizer modes button twice to switch EQ1 or
EQ2:
EQ1: General equalizer EQ2: Bass boost equalizer
The indicator shows the active equalizer:
EQ1: Indicator turns solid blue EQ2: Indicator blinks blue (is the default
equalizer)
How to charge
How to charge
- Insert the Type-C cable into the speaker, and then insert the USB-A connector into a PC or DC charging adapter with a USB-A input to charge, or use a fast charger with a Type-C (not included). While charging, the device indicator is red. The standard charging time is about 3.5 hours.
- The speaker can keep playing music while charging. The red indicator light will turn off as soon as the speaker is fully charged.
When using the battery for the first time, it is required to make its initial calibration: start using it without preliminary charging until it is completely discharged. After that, fully charge the battery. To achieve maximum capacity, it is necessary to carry out 3 complete charge-discharge cycles of the battery.
Switch Between 2 Bluetooth Devices
TWS Connection(Twin Speakers Mode )
Indicator gashing blue before pairing Blue indicator always ON after BT
connected
TWS pair to play. To implement a wireless connection between two speakers
follow the steps on both devices:
- Press and hold the power button on the turned-off speaker for 2 seconds to switch to the BT device search mode (the indicator light will start blinking blue) on 2 devices simultanously
- Press the BT connection button once (only on 1 device) (the light indicator will stop blinking and will turn solid blue, indicating a successful connection)
Restore factory settings
Factory reset
Press and hold the BT connection button for 7 seconds. You will hear a beeping
sound to indicate that the speaker has reset to factory settings.
Storage
The speaker should be stored in a clean, dry and ventilated place with an
ambient temperature between +5 and 40 °C. Avoid contact with corrosive
substances, keep the product away from fire and heat sources. Charge the
device once every six months when not in use.
Instructions for use:
- Product cannot be opened or modified
- Do not disassemble the device or attempt to service it
- If the product is in an environment where the temperature exceeds the permissible range, turn off the device and wait until the operating temperature stabilizes within the specified range
Disposal and recycling information
This symbol on the product, battery, attached documents, or packaging means
that Al the products and batteries should be taken to separate waste
collection points designed by local authorities at the end of the lifespan.
This will ensure that WEEE waste is recycled and treated in a manner that
conserves valuable materials and protects human health and the environment.
Declaration of Conformity (DoC)
Hareby 3mk Protection sp. z o.o. declares that this product is in compliance
with essential requirements and other relevant provisions of Directive
2014/53/EU.
Technical Specifications
| Name | 3mk Fuego |
|---|---|
| Drivers | 45mm + 30mm |
| Frequency response | 70-20.000HZ |
| Impedance | 40 ± 15% |
| Sensitivity | 81dB ± 3dB |
| Max, Power | 30W |
| Cable length | 0.8m |
| Bluetooth version | 5. |
| Waterproof resistance | IPX7 |
| Low latency in BT mode | <180ms |
| Music playtime | up to 12h |
| Bluetooth signal distance | 10m |
| Charging time | 3,5h |
| Standby time | up to 300 days |
| Battery capacity | 5200mAh |
| Charging voltage | DC 5V |
| Weight | 620g |
| Charging port | USB-C |
More information
FuegoTM Let your music burn
3mk Protection sp. z 0.0.
Krotoszynska 35, B-0214a
63-400 Ostrow Wielkopolski, Poland
VAT ID PL 6222833086
Designed in Poland by 3mk Protection
Made in China
