VISUAL COMFORT CHA 8188 Dorchester Club Table Lamp Instruction Manual
- June 12, 2024
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT CHA 8188 Dorchester Club Table Lamp Instruction Manual
Assembly Instructions
NOTICE:
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED):
Scissors
-
Carefully remove all parts from the box. Place on a clean, soft surface.
-
Thread shade riser (B) to the top of cluster (c).
-
Remove finial (A) from shade riser (B).
-
Remove shade (H) from packaging and install to shade riser (B) using finial (A).
NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. -
Install light bulb into the socket.
-
Loosen check ring (E) to adjust rod (D) to desired height, then tighten check ring (E).
-
Remove protective cover (G) from plug (F).
-
Plug into electrical outlet and test fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>