dji FPV Drone Combo with Motion Controller User Guide

dji FPV Drone Combo with Motion Controller

Introduction

Aircraft

1. Propellers
2. Motors
3. Front LEDs
4. Landing Gears (Built‐in antennas)
5.  Frame Arm Light
6. Aircraft Status Indicators
7. Gimbal and Camera
8. Downward Vision System
9. Infrared Sensing System
10.  Auxiliary Light
11. Intelligent Flight Battery
12. Battery Buckles
13. Power Button
14. Battery Level LEDs
15. Battery Port
16. Forward Vison System
17. USB‐C Port
18. microSD Card Slot

Goggles

1. Antennas
2. Front Cover
3. channel Adjustment Buttons
4. Channel Display
5. USB-C Port
6. microSD Card Slot
7. Air Intake
8. Interpupillary Distance (IPD) Slider
9. headband Attachment
10. Foam Padding
11.  Lens
12. Air Vent
13.  Record Button
14. Back Button
15.  5D Button
16. Audio/AV-IN Port
17. Power Port (DC5.5×2.1)
18. Link Button

Remote Controller

1. Power Button
2. Battery Level Indicator
3. Lanyard Attachment
4. Customizable Button
5. Control Sticks
6. USB‐C‐Port
7. Flight Pause Button
8. Gimbal Dial
9. Flight Mode Switch
10. Customizable Switch Take‐off/Landing Button (non‐M mode) Lock/Unlock Button (M mode)
11. Shutter/Record Button
12. Antennas

Preparing the Aircraft

Preparing the Goggles

Charging

Checking Battery Levels and Powering On/Off

Pressoncetocheckthebatterylevel. Press,thenpressandholdtoturnon/off.

Linking

1. Press the link button on the goggles.
2. Press and hold the power button of the aircraft.
3. the battery level indicator of the aircraft turns solid and display the battery level, the goggles stop beeping when successfully linked and the video display is normal.

1. Press and hold the power button of the aircraft.
2. Press and hold the power button of the remote controller.
3. Both the battery level indicators turn solid and displaythe battery level, and the remote controller stop beeping when successfully linked.

When ready to link, the devices will give the following indication: Aircraft: the battery level indicator blinks in sequence Goggles: the goggles beep continually Remote controller: the remote controller beeps continually and the battery level indicator blinks in

Remote Controller

Specifications

Aircraft (Model: FD1W4K)

Takeoff Weight| 790 g
Max Flight Time| 20 mins
Operating Temperature| ‐10°to 40°C
Operating Frequency| 2.400‐2.4835 GHz, 5.725‐5.850 GHz
Transmitter Power (EIRP)| 2.4G: ≤30 dBm (FCC), ≤20 dBm (CE/SRRC/MIC)

5.8G: ≤30 dBm (FCC/SRRC), ≤14 dBm (CE)

Camera
Sensor| 1/2.3’’ CMOS, Effective Pixels: 12M
Lens| FOV: 150°

35mm Format Equivalent: 14.66 mm Aperture: f/2.86

Focus: 0.6 m to ∞

ISO| 100‐3200
Electronic Shutter Speed| 1/8000‐1/60 s
Max Image Size| 3840×2160
Video Resolution| 4K: 3840×2160 50/60p

FHD: 1920×1080 50/60/100/120/200p

Intelligent Flight Battery
Capacity| 2000 mAh
Voltage| 22.2 V(standard)
Type| LiPo 6S
Energy| 45.6 Wh@3C
Charging Temperature| 5°to 40° C
---|---
Max Charging Power| 90 W
Goggles (Model: FGDB28)
Weight| Approx. 420 g(headband and antennas included)
Dimensions| 184×122×110 mm(antennas excluded),

202×126×110 mm(antennas included)

Screen Size| 2 inch×2
Screen Resolution

(Single Screen)

| 1440×810
Operating Frequency| 2.400‐2.4835 GHz；5.725‐5.850 GHz
Transmitter Power (EIRP)| 2.4G: ≤30 dBm (FCC), ≤20 dBm (CE/SRRC/MIC)

5.8G: ≤30 dBm (FCC/SRRC), ≤14 dBm (CE)

Live View Mode| Low Latency Mode(810p 120fps), High Quality Mode (810p 60fps)
Video Format| MP4(Video format: H.264)
Supported Video Play Format| MP4，MOV，MKV

(Video format: H.264; Audio format: AAC‐LC, AAC‐HE, AC‐3, MP3)

Operating Temperature| 0°to 40° C
Power Input| 11.1‐25.2 V
Goggles Battery
Capacity| 2600 mAh
Voltage| 7.4 V(standard)
Type| Li‐ion 2S
Energy| 19.3 Wh
Charging Temperature| 0°to 45° C
Max Charging Power| 21.84 W
Remote Controller (Model: FC7BGC)
Operating Frequecy| 2.400‐2.4835 GHz；5.725‐5.850 GHz
Max Transmission Distance

(unobstructed, free of interference)

| 2.4G: 8 km (FCC)；4 km (CE)

5.8G: 8 km (FCC)；1 km (CE)

Transmitter Power (EIRP)| 2.4G: ≤30 dBm (FCC), ≤20 dBm (CE/SRRC/MIC)

5.8G: ≤30 dBm (FCC/SRRC), ≤14 dBm (CE)

Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.= This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm during normal operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>