CRYSTORAMA ROY-809-BK Royston Five Light Pendant Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
Product Information
The Crystorama Model #ROY-809-BK is a dry-rated lighting fixture that has been
designed to provide illumination for your indoor space. It comes with all the
necessary components for installation, including a mounting plate, wire
connectors, and mounting screws.
The fixture requires 5 medium base bulbs with a recommended wattage of 40
watts. The maximum wattage that can be used is 100 watts. For extended use, it
is recommended to use LED bulbs.
The fixture is made up of various components, including a metal frame, a glass
diffuser, a swivel, and a threaded pipe. It comes with a canopy that has two
side holes and is designed to be hung at a preferred height using the correct
number of rods. It is important to note that all electrical components must be
installed by a licensed electrician in accordance with the National Electric
Code and the appropriate local electrical codes.
This product can expose you to lead, which is known to the State of California
to cause cancer and/or birth defects or reproductive harm.
Product Usage Instructions
- Place all fixture parts on a soft cloth-covered platform before installation.
- Install the bulb (not included) into the socket. Screw the threaded pipe onto the coupling of the swivel and secure it with a hex nut. Place the frame over the bottom of the threaded pipe. Place the metal washer, plastic washer, glass diffuser, plastic washer, hex nut, and bottom cap in that order on the bottom of the frame. Secure with finial.
- Decide on the preferred hanging height and choose the correct number of rods needed.
- Feed the fixture wires through the rods and canopy. Screw the rods together. Screw one end of the rod assembly onto the top of the frame and the other end onto the coupling on the canopy.
- Install the mounting plate onto the outlet box and raise the fixture up to the ceiling. After the wire connection is complete, secure the fixture onto the mounting plate using mounting screws.
It is important to turn off the power before installation and to follow all instructions carefully. For more information on installation, refer to the assembly instruction manual or consult a licensed electrician.
HOW TO INSTALL:
Place the fixture parts on a soft cloth-covered platform before installation of the fixture.
-
nstall the bulb(not included) into the socket.
Screw the threaded pipe onto the coupling of the swivel and secure it with a hex nut. Place the frame over the bottom of the threaded pipe.
Place the metal washer,plastic washer, glass diffuser, plastic washer, hex nut and bottom cap in that order on the bottom of the frame. Secure with finial. -
Decide the preferred hanging height and choose the correct number of rods needed.
-
Feed the fixture wires through the rods and canopy.Screws the rods together.
Screw one end of the rod assembly onto the top of frame and the other end onto the coupling on the canopy. -
Install the mounting plate onto the outlet box and raise the fixture up to the ceiling.
After the wire connection is complete, secure the fixture onto the mounting plate using mounting screws.
WARNING :This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm.For more information go to www.p65warnings.ca.gov
DIMENSIONS
Part Number
- A. (1)-Mounting hardware
- Wire connector x2.
- Mounting plate x1.
- Mounting screw x2.
- B. (2)-Canopy screw
- C. (1)-Canopy(W7″ x H1″) ; with 2 side holes. -XSN809BKCAN7IN
- D. (1)-Swivel
- E. (3)-Knurled Nut
- F. (1)-Socket cluster
- G. (1)-Frame ; Ø24″ x H17 3/4″
- H. (1)-Threaded pipe ; H8 1/4″
- I. (2)-Hex nut
- J. (1)-Metal washer
- K. (2)-Plastic washer
- L. (1)-Glass diffuser; Ø23 1/2″-XSN809DIF23.5IN
- M. (1)-Bottom cap ; Ø2″
- N. (1)-Finial-XSN800BKFIN
- O. (1)-H6″ Rod ; Ø15.8mm-XSN801BKROD6IN
- P. (3)-H12″ Rod ; Ø15.8mm-XSN801BKROD12IN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>