CRYSTORAMA 5013EBCLMWP Ashton Three Light Mini Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA 5013EBCLMWP Ashton Three Light Mini Chandelier
Crystorama Lighting Fixture – Model #5013EBCLMWP
This lighting fixture has been lighting the way for sixty years.
Below are the assembly instructions for Model #5013EBCLMWP:
Product Information
- This fixture requires 3 Candelabra Base Bulbs with a recommended wattage of 40 Watts and a maximum wattage of 60 Watts.
- It is recommended to use LED bulbs for extended use.
- The fixture is Damp rated.
- The product contains Lead which can cause cancer and/or birth defects or reproductive harm.
WARNING: All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and appropriate local electrical codes.
Product Usage Instructions
- Place the fixture parts on a soft cloth-covered platform before installation of fixture.
- Install the mounting bar onto the outlet box.
- Decide the desired hanging height and adjust the chain to the correct length.
- Raise the fixture up and do the wire connection. Attach the canopy over the mounting bar and secure with thread and nut.
- Place the candle sleeve and bobeche over the socket.
- Dress the crystals as illustrated. The product contains 9 sets of crystals, each with one 14mm and one 63mm crystal, and 1 piece with one 14mm and AS8-30mm crystal.
ASSEMBLY INSTRUCTION
MODEL #5013EBCLMWP
WARNING:
Electrical Danger Turn Power Off
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes
You will need 3- Candelabra Base Bulb 40 Watts recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
The fixture is Damp rated
HOW TO INSTALL
Place the fixture parts on a soft cloth-covered platform before installation of fixture.
- Install the mounting bar onto the outlet box.
- Decide the desired hanging height and adjust the chain to the correct length.
- Raise the fixture up and do the wire connection. Attach the canopy over the mounting bar and secure with thread and nut.
- Place the candle sleeve and bobeche over the socket.
- Dress the crystals as illustrated.
Crystal Sets
- A. 9 Sets. (1)14mm + (1)63mm
- B. 1 Piece. (1)14mm + AS8-30mm
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm.For more information go to www.p65warnings.ca.gov
Part Number
- A. (2)-Wire Connector
- B. (1)-Mounting bar
- C. (2)-Mounting Screw
- D. (1)-Thread and nut
- E. (1)-Canopy (W5 3/4″xH1 1/4″)-XSN5013EBCAN5.75IN
- F. (1)-Collar Loop & ring
- G. (1)-Chain (3.0mmx72″)-XSN5013EBCHA3MM
- H. (1)-Fixture Loop-XSN5013EBLOOP
- I. (1)-Frame
- J. (3)-Metal candle sleeve;H2.17″-XSN5011EBMCDL2IN
- K. (3)-White plastic candle sleeve-XSN5011EBPCDL2IN
- L. (3)-Holder
- M. (3)-Bobeche ; Ø3 1/8″-XSN5011EBBOB3IN
- N. (3)-Arm
- O. (1)-Finial
- P. (9)-Eyelet-XSN5011EBEYE
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>