CRYSTORAMA ROY-803-BK Royston Three Light Pendant Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA ROY-803-BK Royston Three Light Pendant
Product Information
The Crystorama Model #ROY-803-BK is a dry rated fixture that has been lighting the way for sixty years. The fixture comes with 12 rods, 1 nipple, and 3 medium base bulbs (40 watts recommended, 60 watts max). It is recommended to use LED bulbs for extended use. The fixture measures 56 1/4 inches in height, 10 3/4 inches in width, and 15 inches in depth. The package includes mounting hardware, wire connector x2, mounting plate x1, mounting screw x2, canopy screw x2, canopy (W5 7/8 x H1) with 2 side holes (XSN803BKCAN5.875IN), and swivel.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.p65warnings.ca.gov
Product Usage Instructions
- Place the fixture parts on a soft cloth-covered platform before installation of the fixture.
- Install the bulb(not included) into the socket. Screw the threaded pipe onto the coupling of the swivel and secure it with a hex nut. Place the frame over the bottom of the threaded pipe. Place the metal washer, plastic washer, glass diffuser, hex nut, and bottom cap in that order on the bottom of the frame. Secure with finial.
- Decide the preferred hanging height and choose the correct number of rods needed.
- Feed the fixture wires through the rods and canopy. Screw the rods together. Screw one end of the rod assembly onto the top of the frame and the other end onto the coupling on the canopy.
- Install the mounting plate onto the outlet box and raise the fixture up to the ceiling. After the wire connection is complete, secure the fixture onto the mounting plate using mounting screws.
- All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. Turn power off before installation.
ASSEMBLY INSTRUCTION
MODEL # ROY-803-BK
WARNING:
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes
You will need 3- Medium Base Bulb 40 Watts recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE The fixture is Dry rated
HOW TO INSTALL
Place the fixture parts on a soft cloth-covered platform before installation of fixture.
- Install the bulb(not included) into the socket. Screw the threaded pipe onto the coupling of the swivel and secure it with a hex nut. Place the frame over the bottom of the threaded pipe. Place the metal washer,plastic washer, glass diffuser,hex nut and bottom cap in that order on bottom of the frame. Secure with finial.
- Decide the preferred hanging height and choose the correct number of rods needed.
- Feed the fixture wires through the rods and canopy.Screws the rods together. Screw one end of the rod assembly onto the top of frame and the other end onto the coupling on the canopy.
- Install the mounting plate onto the outlet box and raise the fixture up to the ceiling. After the wire connection is complete, secure the fixture onto the mounting plate using mounting screws.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm.For more information go to www.p65warnings.ca.gov
Part Number
- (1)-Mounting hardware
- Wire connector x2.
- Mounting plate x1.
- Mounting screw x2.
- (2)-Canopy screw
- (1)-Canopy(W5 7/8″ x H1″) ; with 2 side holes.
- (1)-Swivel
- (3)-Knurled Nut
- (1)-Socket cluster
- (1)-Frame ; Ø15″ x H10″
- (1)-Threaded pipe ; H4 3/4″
- (2)-Hex nut
- (1)-Metal washer
- (1)-Plastic washer
- (1)-Glass diffuser ; Ø14 3/8″-XSN803DIF14.375IN
- (1)-Bottom cap ; Ø2″
- (1)-Finial-XSN800BKFIN
- (1)-H6″ Rod ; Ø15.8mm-XSN801BKROD6IN
- (3)-H12″ Rod ; Ø15.8mm-XSN801BKROD12IN
