HOME ACCENTS HOLIDAY 22HD90004 Maysville Pine Christmas Tree Instruction Manual
- June 12, 2024
- HOME ACCENTS Holiday
Table of Contents
USE AND CARE GUIDE
7.5 FT MAYSVILLE PINE ARTIFICIAL PRE-LIT TREE Iltem #1007 124 446
Model #22HD90004
THANK YOU
We appreciate the trust and confidence you have placed in Home Accents through
the purchase of this Christmas tree. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line
of products available for your home improvement needs. Thank you for choosing
Home Accents!
Safety Information
IMPORTANT SAFETY INFORMATION. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
- This seasonal product is not intended for permanent installation or use.
- Do not secure the wiring of the product with staples or nails.
- Unplug the product when leaving the house, retiring for the night, or if left unattended.
- This transformer is rated at 120V, 60 Hz (input) and 29V, 0.28A, 8W (output).
- Do not hang ornaments or other objects from the cord, wire, or light string.
- Do not rest any object on power supply cord or wires. Avoid objects which might damage wires.
- This product is for decoration ONLY. This is not a toy. Keep small children away from this product.
WARNING: Do not connect extra light sets, tree toppers, or any other
electrical items to the existing light sets on your pre-lit tree. This will
void the warranty.
WARNING: Do not mount or place the tree near gas or electric heaters,
fireplaces, candles or other similar combustible sources.
WARNING: Do not use seasonal products outdoors unless marked suitable for
indoor and outdoor use.
WARNING: This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received ,
including interference that may cause undesired operation.
SAVE THESE INSTRUCTIONS
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of more of the following measures:
- Reorient or relocate the receiving antenna. Increase the distance between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warranty
The manufacturer warrants this product against defects in materials or
workmanship for a period of three years from the date of purchase.
The manufacturer will replace defective parts on the product at no charge.
This limited warranty does not cover damage resulting from accident, misuse,
abuse, negligence or normal wear and does not apply to floor models or display
trees.
To obtain warranty service, you must notify The Home Depot by calling the
customer service number below. NO WARRANTY CLAIMS WILL BE CONSIDERED WITHOUT
ORIGINAL PROOF OF PURCHASE. Replacement as provided by this warranty is the
exclusive remedy of the consumer and does not place the manufacturer liable
for any incidental or consequential damages.
Contact the Customer Service Team at
1-855-434-6543 or visit
www.homedepot.com.
Pre-Assembly
PLANNING ASSEMBLY
Compare all parts with the Package Contents list. If any part appears missing
or damaged, do not assemble and use this product. Contact Customer Service.
PACKAGE CONTENTS
| Part | Description | Quantity |
|---|---|---|
| A | Tree Section A | 1 |
| B | Tree Section B | 1 |
| C | Tree Section C (with plug) | 1 |
| D | Tree Stand | 1 |
| E | Eyebolt Screw | 1 |
| F | Remote Control | 1 |
Installation
1 Preparing the tree and stand
- Lay each of the three tree sections gently on the ground in alphabetical order.
- Remove the plastic protective cap at the end of each pole. Save and re-use these protective caps when storing the tree.
- Open the metal stand (D) to form an “X” shape. Line up the holes on the tube of the stand.
- Thread the eyebolt screw (E) through the stand until you see or feel the end of the eyebolt flush with the inside of the tube.
- Locate the stand (D) on a stable and even space to ensure the stability of the tree.
2 Assembling the tree
- Place tree section C firmly into the stand (D) and secure in place with the eyebolt (E). Ensure tree section C is standing straight in the stand.
- Insert tree section B into the top of tree section C, followed by tree section A.
- Shape the tree sections to create the desired appearance for your tree. For example, shape some tips downward and some tips upward to give shape to your tree and to fill in any gaps – giving your tree a fuller and fluffier appearance.
Operation
- To turn the lights on, simply plug the cord into an outlet.
- To operate the lights, you can either use the remote control or the foot pedal switch on the outlet cord:
- To operate the lights using the foot pedal switch, press the foot pedal switch until it clicks. Press again to view the second lighting option and so on for all functions. The available lighting options are:
- Steady Warm White
- Steady Multi
- Warm White to Multi
- Warm White & Multi Fading .
- Warm White Glow
- Multi Glow
- Warm White Sparkle
- Multi Sparkle
- Repeat all 8 functions
- Off
Care and Storage
- Before disassembling the tree, unplug the tree and remove all ornaments and decorations. When unplugging the tree, do not pull on the cord.
- Gently lift the tree top straight up to remove from the center section and fold all branches towards the pole. Repeat this step for the center and bottom tree sections.
- When storing the product, carefully remove the product from wherever it is placed, including tree, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires.
- Use the protective caps to cover the poles to avoid damaging the internal parts.
- When not in use, store neatly in a cool, dry location protected from sunlight.
- Keep out of reach of pets and children.
Troubleshooting
| Problem | Solution |
|---|---|
| The tree does not light when plugged in. | Check to ensure all tree sections |
are securely connected to each other. Press the On/Off button on either the remote control or the control box on the plug.
****Questions, problems, missing parts? Before returning to the store,
call Home Accents Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-434-6543
HOMEDEPOT.COM
Retain this manual for future use.