CRYSTORAMA 5938-CH-CL-MWP Eight Light Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA 5938-CH-CL-MWP Eight Light Chandelier
Product Information
The assembly instruction model #5938-CH-CL-MWP is a damp-rated chandelier that requires 8-candelabra base bulbs with a recommended wattage of 40W and a maximum wattage of 60W. LED bulbs are recommended for extended use. The fixture comes with crystal sets labeled A, B, C, and D, which need to be applied in alphabetical order. All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
Product Usage Instructions
- Before starting the installation process, do a complete inventory of all parts and components to ensure that everything is included.
- Adjust each arm until they are at an equal distance from one another. Then place the metal cap over the top end of the arms and secure them by tightening the cap down with the loop.
- Safely attach the fixture into the outlet box and install the candle sleeve and bulbs. Proceed to connect the power.
- When dressing the fixture, start with the packet labeled (A).
- Apply the crystal sets in alphabetical order: A (14mm+63mm)x44sets, B (14mm+50mm)x32sets, C (14mmx7pcs+50mm ball)x1set, D (14mmx3pcs+50mm ball)x1set.
Please note that all electrical components must be installed bya licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes for safety reasons.
WARNING:
All electrical components must be installed by a licensed electrician in
accordance with the National Electric Code and the appropriate local
electrical codes
You will need 8-Candelabra Base Bulb 40Watts Recommended 60 Watts Max. USE LED
BULBS FOR EXTENDED USE
The fixture is damp rated
How to Install
- Do a complete inventory of all parts and components before you start installing
- Adjust each arm until they are at an equal distance from one another. Then place the metal cap over the top end of the arms, securing them all by tightening the cap down with the loop
- After safely attaching the fixture to the outlet box, install the candle sleeve, and bulbs and proceed to connect the power.
- When you begin to dress the fixture, start with packet labeled (A)
- IMPORTANT: Apply crystal sets in alphabetical order
Crystal Sets
- A. (14mm+63mm)x44sets
- B. (14mm+50mm)x32sets
- C. (14mmx7pcs+50mm ball)x1set
- D. (14mmx3pcs+50mm ball)x1set
ASSEMBLY INSTRUCTION
Part Numbers
- A. (3)-Wire Connector
- B. (1)-Mounting Plate
- C. (1)-Ground Screw
- D. (1)-Nipple
- E. (2)-Outlet Box Screws
- F. (1)-Canopy (W5.29″xH1.25″) XEH5933CHCAN5.29IN
- G. (1)-Collar Loop
- H. (1)-Collar Ring
- I. (1)-Chain;72″,4mm XEH5933CHCHA4MM
- J. (1)-Loop
- K. (1)-Metal cap XEH5938CHMCAP
- L. (1)-Frame
- M. (8)-Metal Sleeve (H5″) XEH5938CHMCDL5IN
- N. (8)-Plastic Sleeve (H5″) XEH5938CHPCDL5IN
MODEL #5938-CH-CL-MWP
LIGHTING THE WAY FOR SIXTY YEARS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>