CRYSTORAMA BRY-8004-BF Bryant 4-Light Black Forged Chandelier Instruction Manual

CRYSTORAMA BRY-8004-BF Bryant 4-Light Black Forged Chandelier

ASSEMBLY INSTRUCTION

MODEL#BRY-8004-BF

For Hanging

For Ceiling

All electrical components must be installed by a licensed electrician In accordance with the National Electric Code and the appropriate local electrical codes.

You will need 4- Cand. Bulb 40 Watts Recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE THE FIXTURE IS DAMP RATED

How to install For Hanging

1. Place the frame on a soft cloth-covered platform and lay two pieces of glass on the two adjacent cutouts of the frame. Hold the glass while aligning the holes on the metal strap with the holes on the frame. Two persons handling is recommended for this step.

2. Install the and of the rod(without the tab) onto the canopy and secure with a nut. Repeat for all rods. Do not tighten the nut until the end of step #3.

3. Spread the rods out equally and align the holes at the tab of rod with holes in the banding ring. Secure the rods with flat head screws.
   Now the nuts inside the canopy can be tightened to secure the roads in place.

4. Place the plate over the top of the canopy and secure with the loop.

5. Install the mounting bar to the outlet box using two outlet box screws.

6. Decide the desired hanging height and cut the chain to the proper length.

7. Install the canopy onto the mounting bar and secure with the screw collar loop ring.

How to install For Ceiling

1. Step#-3 are same above.
2. Remove the coupling by loosening the finial and hex nut.
3. Install the mounting bar onto the outlet box using two outlet box screws.
4. Install the canopy onto the mounting bar and secure with the nex nut and finial

Part Number

• A. (!)-Mounting Hardware For Hanging
• B. (1)-Canopy For Hanging W5-l/2″XHl”{XSU8004BFCANS.SIN)
• C. {l)-Chain;3.8MM(XSU8004BFCHA3.8MM)
• D. (!)-Mounting Hardware For Celing
• E. (1)-Canopy;W4-3/4″XH3/4″ (XSU8004BFCAN4.7INC)
• F. (4)-Rods (XSU8004BFSIDEROD)
• G. (8)-Flat head Screws
• H. (1)-Loop(XSU8004BFLOOP)
• I. (4)-Glass;W12-1/4″XH5-1/2″ (XSU8004GLA12.25IN)
• J. (8)-Machine Screws
• K. (4)- Bulb(Not Included)
• L. (1)- Finial(XSU8004BFFIN)
• M. (4)- Metal strap
• N. (1)- Plate
• 0. (1)- Coupling

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>