CRYSTORAMA 511-GA Broche One Light Wall Mount Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION
MODEL #511-GA
511-GA Broche One Light Wall Mount
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
You will need 1 -Candelabra Base Bulb 40 Watts Recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE THIS FIXTURE IS DAMP RATED
How to install
- Do a complete inventory of all parts and components before you start installing.
- Please remove all three leaves before installing the fixture onto the outlet box.
- Install the backplate onto the outlet box. 4.Insert recommended bulb (not included).
- Place the small leaf, middle leaf and large leaf in that order, over the nipple on the socket and secure them with the hex nut and finial.
(Please note that the leaves can be adjusted by bending them slightly. )
WARNING: This product can expose you to Lead, which is known to the State
of California to cause cancer and/or birth defects or reproductive harm. For
more information go to
www.P65Warnings.ca.gov.
PART NUMBER
Part Number
A. (1) – Mounting Hardware
B. (1) – Backplate(D4.72”,H0.78”) #XRE511GABKP4.72IN
C. (2) – Finial #XRE511GAFIN
D. (1) – Small Leaf
E. (1) – Middle Leaf
F. (1) – Large Leaf
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>