CRYSTORAMA 1061-PB-CL-MWP Traditional Crystal Five Light Mini Chandelier Instruction Manual

CRYSTORAMA 1061-PB-CL-MWP Traditional Crystal Five Light Mini Chandelier Instruction Manual

Part List

Part Numbers

• A. (2)-Wire Connector

• B. (1)-Mounting Bar

• C. (1)-Lock Washer

• D. (1)-Hex Nut

• E. (1)-Nipple

• G. (1)-Collar Ring

• H. (1)-Collar Loop

• I. (1)-Chain(4mmx72″)-XSN1061PBCHA4MM

• J. (1)-Center Column Kit Loop

• K. (1)-Center Column Kit
  Top Bobeche;Ø5″,5pin,24mm center hole. -XSN1061PBBOB5PN Glass Vase x 2pieces ;H5

• L. (5)-PVC Candle Sleeve

• M. (5)-Bobeche ; Ø4″,4pin,24mm center hole. -XSN1061PBBO

• N. (5)-6″Arms-XSN500GDARM6INKD

• O. (5)-Female Plug

• P. (1)-Distributor Box

• Q. (1)-Bottom Bowl; Ø6″,10 pin,13mm center hole.

• R. (1)-Check Ring ; Ø1 3/8″

• S. (1)-Finial-XSN1061PBFIN

ASSEMBLY INSTRUCTION

Crystal Sets

A. 5 Sets. (3)14mm + (1) Square
B. 5 Sets. (5)14mm + AS9-2.5″
C. 10 Sets. (15)14mm
D. 5 Sets. (1)Ring +(1)14mm + AS9-2.5″
E. 5 Sets. (1)14mm + AS9-2.5″
F. 1 Piece. (1)14mm + (1)22mm + AS8-40mm Ball
G. 20 Sets. (1)14mm + AS9-2″
H. 5 Sets. (2)14mm + AS9-2.5″

DETAILED ILLUSTRATION

• Bottom Bobeche: Alternate E & H

• (1)Bobeche with Gx4

WARNING:

Electrical Danger

Turn Power Of

All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local elecrical codes You will need 5- Candelabra Base Bulb 40 Watts recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE

The fixture is Dry rated

HOW TO INSTALL

Place the fixture parts on a soft cloth-covered platform before installation of fixture.

1. Screw the Center column kit onto the distributor box.
2. Place the bottom bowl and check ring in that order,over the bottom distributor box. Secure with the finial.
3. To install the glass arms, slightly loosen each screw on the top plate over the distributor box. Pull a female plug through a hole in the plate. Connect the male plug at the end of the arm with the female plug that was just pulled. Push the end of the arm with the metal tab through the hole until stopped by the metal tab(this should also push the wires and plugs back inside the metal plate). Twist the metal tab counter-clock wise until both inserts lock onto the loose screws. Tighten the screw securing the arm in place. Repeat for all arms.
4. Put the bobeche over the socket.
5. Attach the mounting bar onto the outlet box.
6. Decide the desired hanging height and adjust the chain to the correct length.
7. Raise the fixture up and do the wire connection. Attach the canopy over the mounting bar and secure with collar ring.
8. Dress the crystals as illustrated.

WARING:This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm.For more information go to www.p65warnings.ca.gov

References

• p65warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>