CRYSTORAMA 724-OB-CL-MWP Six Light Ceiling Mount Instruction Manual
- October 30, 2023
- CRYSTORAMA
Table of Contents
CRYSTORAMA 724-OB-CL-MWP Six Light Ceiling Mount Instruction Manual
WARNING:
Electrical Danger
Turn Power Off
All electrical components must beinstalled by a licensed electricianin
accordance with the NationalElectric Code and the appropriate local electrical
codes
You will need 6- Candelabra Base Bulb40 Watts recommended 60 Watts Max.USE LED BULBS FOR EXTENDED USE
The fixture is Dry rated\
HOW TO INSTALL
Place the fixture parts on a softcloth-covered platform beforeinstallation of fixture.
- Place the mounting bar over the outlet box and mark the two points on the ceiling at the same distance as between the two holes on mounting bar. See illustration on next page.
- Drill the holes at the marked points on the all and insert the wall anchors into the holes. Place the mounting bar over the outlet box and secure with anchor screws.
- Attach the Frame over the mounting bar. After the wire connection is completed, secure with ball nut.]\
- Screw the stem onto the coupling on the frame and secure with a hex nut. Slide the smaller tube, check ring , metal ring, check ring, larger tube and check ring in that order over the stem. Secure with a hex nut.
- Place the vase cap over the end of the stem and secure with the fini
- Dress the crystals as illustrated.
Crystal Sets
A. 52Sets. (1)32mm + (1)58mm Baguette + (1)20mm + (1)18mm + (1)16mm +
(1)14mm
B. 26Sets. (1)28mm + (1)58mm Baguette + (1)16mm + (1)14mm + (1)12mm
WARNING : This product can expose you to Lead,which is known to the State of California to cause cancerand/or birth defects or reproductive harm.For moreinformation go to www.p65warnings.ca.gov
Part Number
A. (2)-Wire Connector
B. (1)-Mounting bar
C. (4)-Wall anchor
D. (4)-Wall anchor screw
E. (2)-Screw
F. (2)-Small hex Nut
G. (2)-Ball nut-XSN724OBBANUT
H. (1)-Frame ; Ø24″ ; 52 pin holes ; with inner plate.
I. (4)-Check ring
J. (1)-Coupling
b(2)-Hex Nut
L. (6)-Socket
M. (1)-Stem ; H10″-XSN718OBSTEM10IN
N. (1)-Tube ; H4″-XSN724OBSTEM4IN
O. (1)-Tube ; H4 3/4″-XSN724OBSTEM4.75IN
P. (1)-Metal ring ; Ø12″ ; 52 pin holes for up side ; 26 pin holes for
lower side.
Q. (1)-Vase Cap ; Ø3″ ; 26 pin holes-XSN724OBCAP
R. (1)-Finial-XSN724OBFIN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>