oe electronics INSTR1292 QIKDOC Connect Clamp Fix Instructions
- June 3, 2024
- oe electronics
Table of Contents
oe electronics INSTR1292 QIKDOC Connect Clamp Fix
QIKDOC Connect Clamp Fix instructions
- Cutout size
- Fit QIKDOC into surface
- Align clamp brackets with QIKDOC and screw into place using screws provided (a T10 Torx bit is required)
- Tighten bolts
- Align QIKPAC CARRY with QIKDOC, slide the heel side of the QIKPAC CARRY into QIKDOC first and rotate down until click is heard
- Pull thumb release (highlighted orange) to release QIKPAC CARRY
- Lift QIKPAC CARRY from QIKDOC
- Connect GST08 cable(s) to underside of QIKDOC (where applicable*)
- Cable tie GST08 cable(s) into place
UK – sales@oeelectrics.co.uk / +44 (0) 1924
367 255 AUS – sales@oeelsafe.com.au / 1300
ELSAFE (357 233)
DE – info@oeelectrics.de / +49 (0)2261 958 3001
U.S.A – sales@oeelectrics.com / +1
(844)-927-0600
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>