HOME ACCENTS Holiday TY461-2011-1 5.5ft LED Lighted Nativity Scene Instruction Manual
- October 30, 2023
- HOME ACCENTS Holiday
Table of Contents
ASSEMBLY INSTRUCTIONS
5.5ft LED Lighted Nativity Scene
SKU # 1005 415 835
Model # TY461-2011-1 
TY461-2011-1 5.5ft LED Lighted Nativity Scene
Thank you!
We appreciate the trust and confidence you have placed in Home Accents through
the purchase of this 5.5ft LED Lighted Nativity Scene. We strive to
continually create quality products designed to enhance your home. Visit us
online to see our full line of products available for your home improvement
needs. Thank you for choosing Home Accents!
1-855-HDHoliday (1-855-434-6543)
HOMEACCENTSHOLIDAY.COM
Parts List
Locater| Name| Qty.
A| Star| 1
B| Top of Stable| 2
C| Left & Right Columns of Stable| 2
D| Support Bar| 2
El| Left Base Stand| 1
E2| Right Base Stand| 1
F| Mary’s Head/Body| 1
G| Mary’s Right Arm| 1
H| Halo| 1
I| Baby| 1
J| Body of Bed| 1
K| Halves of Cane| 2
L| Joseph’s Head| 1
M| Joseph’s Upper Body| 1
N| Joseph’s Lower Body| 1
0| Joseph’s Arm| 2
P| Oil Lamp| 1
Hardware List
Locater| Name| Qty.
Q| Plastic Ties| 20
R| Bolt & Wingnut| 5
S| Cotter Pin| 11
T| Ground Stake| 12
U| Spare Bulb| 7
V| Spare Fuse| 6
USE AND CARE GUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many
parts are connected by the lighting string that runs throughout the item. Take
special care not to pull, cut or damage the lighting string. Read the entire
manual prior to assembly and identify all the parts included in the package
against the parts list. It is recommended to assemble parts of the product
while laying flat on the ground versus standing the item up to assemble the
parts. If any parts are missing or damaged do not attempt assembly but contact
our customer service center or return to the place of purchase with purchase
receipt. 1-855-HDHoliday (1-855-434-6543)
*Assembly of this product may require more than one person.
Pre-Operation
CAUTION: Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION: The lighting string on this product is rated at 26.4 Watts (0.22
Amps). Do not overload. Do not connect to another lighting string, decorative
outfit or other electrical products. Before you use or re-use this product
inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product
has cuts, damage, frayed wire insulation on cords, cracks in the socket
enclosures, loose connections, exposed copper wire or other obvious damage.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to
avoid any undue strain or stress on the product connections and wires. If the
product is placed somewhere other than the ground it should be well secured
and flat.
b. Carefully disassemble the unit taking caution not to cut any electrical
wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Troubleshooting
a. Ensure that the floor, ground or surface that the item sits on is flat
and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power
Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year.
This product is covered by a 90 days limited guarantee due to defects in
material and workmanship. Return the product with purchase receipts to the
location of purchase for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products
not used in accordance with directions provided on or with the product, burn
out of bulbs or LEDS, batteries, products that have been subjected to
unauthorized repair and/or modification and damage caused by shipping and
improper handling, alterations, misuse, in store display models or accidents.
Questions, problems, missing parts? Before returning to the store, call Home
Accents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
1-855-HDHoliday (1-855-434-6543)
Diagram of Parts
ASSEMBLY
-
Assembling the Top, Left & Right Columns of Stables and Base Stands
Attach the connecting rods on the bottom of each of the Top of Stable (B) to the connecting holes on the top of the Left & Right Columns of Stable (C). Fasten them together at the connection loop with Bolt & Wingnuts (R). Insert the connecting rods of on the bottom of the Left & Right Columns of Stable (C) into the connecting holes on the Left & Right Base Stands (E1&E2). Fasten them together at the connection loop with Bolt & Wingnuts (R).
-
Assembling the Star to the Top of Stable
Insert the connecting rods on the Star (A) into the matching connecting holes on the front Top of Stable (B).
-
Attach the Support Bars to the Stable
Insert the hooked end of the metal stabilizing bars from Support Bar (D) into the connecting holes on backside of the Top of Stable (B) and the Left & Right Base Stands (E1&E2) then secure with the Cotter Pins (S). -
Assembling Mary’s Head and Arm to Body
Insert the connecting rods on Mary’s Right Arm (G) into the matching connecting holes on the Mary’s Head/Body (F). Insert the connecting rods on the bottom of Mary’s Lower Body (F) into the matching connecting holes on the Right Base Stand (E2) and fasten at the connecting loops with Plastic Ties (Q). Insert the connecting rods of Support of Mary into the matching holes on the Right Base Stand (E2) then lock with Cotter Pin (S). -
Assembling the Baby and Bed
Insert the connecting rods on the Halo (H) into the connecting holes on Body of Bed (J) and fasten at the connecting loops with Plastic Tie (Q). Insert the connecting rods on the Baby (I) into the connecting holes on Halo (H) and Body of Bed (J). Insert the connection rods on Support of Baby’s Bed (H) into the connection holes of Body of Bed (J) .
-
Assembling the Arms and Body of Joseph and Oil Lamp
Insert the connecting rods on Joseph’s Head/Body (M) into the matching holes on the top of Joseph’s Lower Body (N) and fasten them with Plastic Ties (Q) over the metal frame where the parts meet. Insert the connecting rods on Joseph’s Right and Left Arms (O) into the connecting holes on the sides of Joseph’s Upper Body (M). Hang the Oil Lamp (P) on the holes of Joseph’s left hand. -
Assembling the Cane to Joseph’s Arm and Joseph to the Base Stand
Assemble the 2 Halves of Cane (K) and place the Cane in the hole on Joseph’s right hand (O) and secure the bottom of the Cane into the connecting hole at the bottom right of Joseph’s body. Insert the connecting rods on Support of Joseph (N) into the matching connecting holes on the Left Base Stand (E1) then lock with Cotter Pins (S).
-
Assembling the Ground Stakes
Insert Ground Stakes (T) over the metal frame at each Base Stand and the feet of Baby’s Bed then into the ground firmly.
