OTTO OTBTSPOD Selfie Stick and Tripod with Remote User Guide
- June 4, 2024
- OTTO
Table of Contents
OTTO OTBTSPOD Selfie Stick and Tripod with Remote
Overview
User Guide
- Bluetooth pairing
- Hold the camera key for 3 seconds until the blue light flashes to show that the Bluetooth is turned on: pair up with“OTBTSPOD”. The blue light will be on all the time if the pairing is successful.
- Hold the camera key for another 3 seconds to turn remote off.
- Open the phone holder
- Rotate the phone holder so it faces forward and adjust to the desired angle.
- Mount the phone
- Rotate the phone holder till you can pull open the holder handle and mount the phone securely on the holder.
- Photograph
- Press the volume button on your phone to act as the shutter button.
- Use the remote control to take a photo.
- Compact Action Camera (CAC) Mount
- Rotate the phone holder back to the closed state, and then rotate the CAC mount up, you can put a compact action camera in the CAC mount.
- Use tripod
- This product has an inbuilt tripod. Open the selfie holder from the bottom and fix it on a steady horizontal plane, then you can start to enjoy your selfie shooting experience.
Note
In order to protect your phone, please keep the tripod steady while
preventing other external forces from bumping the tripod.
Charging
Plug the micro USB charging cable into the charging port to start charging.
Warning
- Please charge with 5V/1A USB power adaptor only.
- The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Officeworks Ltd. is under license.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>