OTTO BL9703-GS Life Pro Standmixer Instruction Manual

OTTO BL9703-GS Life Pro Standmixer

IMPORTANT SAFETY PRECAUTIONS

Follow these basic safety precautions when using the electrical appliance:

1. Read all instructions.
2. Verify that the appliance nameplate shows the correct power supply voltage before using it.
3. Keep cords away from table edges and countertops.
4. Appliances should not be operated with a damaged cord plug or after the appliance has malfunctioned or been damaged in any way. For examination, repair, or adjustment, return the appliance to an authorized service facility.
5. Although children are not intended to use the appliance, it is foreseeable and only allowed with adult supervision.
6. Avoid contacting moving parts.
7. Blades are sharp, so handle with care.
8. A pitcher, lid, or other attachments not recommended or sold by the manufacturer may cause a fire, electric shock, or injury.
9. In order to prevent blade blunting, the appliance should not be used for blending hard or dry substances.
10. Make sure the appliance is turned off before approaching moving parts.
11. Remove the power supply cord plug from the outlet after the motor has completely stopped before disassembling.
12. Individuals (including children) with reduced physical, sensory, or mental capabilities or a lack of experience and knowledge may not use this appliance unless a person responsible for their safety supervises or instructs them regarding how to use it.
13. Supervision is necessary to prevent children from playing with the device.
14. Water and other liquids should not be immersed in the motor unit.
15. Save these instructions

Become Familiar with the Blender

For the initial use

1. Unpack the appliance and place all parts on a horizontal surface.

2. Pour warm soapy water into the pitcher, lid cover, and then rinse and dry.
   Never immerse the motor unit in water for cleaning to prevent the risk of electric shock.
   Caution : the blade is very sharp, handle with great care.

3. Detailed instructions will be provided in the following sections on how to assemble the component.

Before assembling the blender, be sure the power cord is unplugged from the power outlet and the Switch button is set to 0.
The blender is suitable for making mixtures which the juice and pulp are mixed.
To attach the pitcher, place the pitcher into the motor unit directly in place, (see fig.1).

Note : make sure the pitcher is assembled into the motor unit properly, there is interlock switch on the position, if the pitcher is not assembled properly, the blender will not operate.

Blending fruits and vegetables

1. Before attaching the power cord into the outlet, make sure the Switch button is set to 0.

2. Cut the fruit or vegetables into small dice, then peel or core them, and then put them into the pitcher. The smooth operation of an appliance is usually facilitated by adding purified water. Food and water should be mixed in the proportion of 4:5. The amount of mixture should not exceed the maximum level indicated on the pitcher.
   Note : Never use boiling liquids or run the appliance empty. The pitcher can be used for breaking up ice.

3. Replace the lid on the pitcher. Remove the lid from the pitcher.

4. Turn the Switch button to the desired setting, there are five settings: P, 0, 1,2. Turn switch to P position and hold it to pulse actuate motor for delicate chopping. Release it to return the 0 position.

5. The consecutive operation time shall be less than 3 minutes. Minimum 1 minutes rest period is required between two consecutive cycles.

6. Turn the Switch button to 0 Position once the mixture has been blended to your desired consistency.

7. Pour the beverage into the pitcher, then carefully remove the pitcher cover, then remove the pitcher from the motor unit.

Cleaning and Maintenance

The auto clean feature can clean the blender and blade assembly easily, rapidly in complete safety.

• Pour a little warm soapy water into the pitcher and turn the Switch button to P position for a few seconds.
• Remove the pitcher from the motor unit by directly taking it upward and rinse the pitcher and lid cover under running water.
• Wipe the outer surface of a motor unit with a damp cloth, do not use abrasive cleansers. Never immerse the motor unit in water for cleaning.
• Dry all parts and then reinstall them

For complete cleaning, you can hold the blade assembly at the bottom of the pitcher carefully, for it is sharp, take it out by turning coupling on the other side clockwise emphatically (see Fig.2), then put the detachable accessories into a dishwasher for cleaning; they are dishwasher safe components, but the temperature setting shall not exceed 70#.
There is no user-serviceable part inside the motor mass, so you should never disassemble it yourself if there is a problem. Contact only the authorized service facility for examination and repair.

Environment Friendly Disposal
By protecting the environment, you can make a difference!
Remember to dispose of non-working electrical equipment according to local regulations.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>