otto 451 Wardrobe Mirror Owner’s Manual
- June 1, 2024
- OTTO
Table of Contents
otto 451 Wardrobe Mirror
Specifications
- Model Number: LKZ 80585
- Dimensions: 856mm x 785mm x 16mm
- Quantity: 1 unit in 1 box
Product Information
This product is a furniture hardware set designed for assembly and
installation purposes. It includes various components such as screws, bolts,
and fasteners to securely attach furniture pieces together. The hardware set
is essential for ensuring the stability and longevity of the furniture.:
-
Step 1: Check Contents
Before starting the assembly process, carefully check the contents of the package to ensure all components are included as per the specifications. -
Step 2: Assembly
Follow the provided installation instructions step by step to assemble the furniture pieces using the hardware set. Make sure to tighten all screws and bolts securely to avoid any instability. -
Step 3: Troubleshooting
If you encounter any missing parts or face difficulties during assembly, refer to the contact information provided in the manual to request replacement components or seek assistance.
FAQ:
Q: What should I do if a piece of hardware is missing?
A: In case of missing hardware components, please send the service card to the
specified email address for assistance in receiving replacement parts.
Installation
tighten
press
measure
press
hammer
wenden
CARTE SERVICE
Model name
Our direct order service for fitting
If a fitting part is missing, you can e-mail this service card directly to the
address below. However, we can only send fitting parts in this way. If you
have any other cause for complaint concerning your item of furniture, please
contact your furniture store directly.
- Reason of the objection:
- Haus-Nr. / House No.
- @E-Mail:
- Street:
- postal code: Ort / City:
- Name / Name:
- Furniture store
Dear valued customer,
Thank you for purchasing furniture from our interior programme, exclusively
for use in private rooms. Please check the delivery for completeness,
carefully read the following important information prior to assembly and
retain it for future use, also by third parties. Our furniture may only be
used as intended. Improper use can cause damage to property, or personal
injury under certain circumstances. Furniture is not a toy. The manufacturer
or distributor assumes no liability for damage caused by unintended use or
improper handling.
ATTENTION: Children or persons with a mental disability must be kept away from
furniture components, sharp objects, small parts and packaging materials at
all times. There is a risk of injury and/or suffocation. ASSEMBLY: Please
observe our operating, assembly or installation instructions for assembly and
observe the warnings and safety instructions in particular. Failure to follow
instructions may lead to personal injury or damage to the furniture, and can
pose a safety risk. Please contact our service team if you have problems with
setup/assembly. They will be happy to help you. Assembly may only be carried
out by competent persons. No liability for damage is assumed in case of
changes to the product/product components or the replacement/use of
parts/consumables not provided by the manufacturer/distributor If wall
mounting materials such as dowels or screws are included with the product,
these are intended exclusively for use on solid walls made of uniform
materials. Attachment is only as good as the connection between the mounting
materials and the wall. For both standing and hanging furniture, check your
wall for suitability prior to attachment and only use suitable mounting
materials. Ensure there are no lines in the drilling zone before drilling any
holes. Ultimately, the installer is responsible for the attachment to the
wall. This also applies to the installation of electrical appliances and other
structural accessories. The assembly/installation of electrical appliances and
other structural accessories must be performed exclusively by authorised,
qualified personnel. All electrical and structural installations must be
carried out according to the respective applicable standards and safety
regulations in your federal state. Only use approved illuminants for light
sources.
There is a risk of overheating and fire if the maximum wattage is exceeded. Covering illuminants is prohibited due to the risk of fire. Proper functioning of the furniture requires plumb and horizontal alignment. The doors are pre- adjusted but may have to be readjusted due to local conditions. Be sure to observe the weight specifications for maximum loads. Climbing on furniture is prohibited. Furniture may tip over in case of improper use. To prevent this, furniture should always be secured against tipping over. There is a risk of breakage and injury in case of overloading (in particular by playing children, people, materials or other prohibited loads). All screws and load-bearing connections should be re-tightened after 5 to 6 weeks to ensure permanent stability
CARE:
Notes on furniture care
- Please observe our information on proper furniture care to ensure you can enjoy our product for a long time. Use a clean, dry, soft cotton cloth for cleaning. If your furniture is heavily soiled, you may moisten the cloth with some water or furniture cleaner and dry the cleaned elements afterwards. Metal and glass components are best cleaned with conventional metal and glass cleaners according to the instructions provided for them. The cleaning agents must be clearly identified as being suitable for furniture care. Do not use steam cleaners, corrosive, scouring cleaning agents or other cleaners with unknown effects under any circumstances.
ATTENTION: High-gloss surfaces are covered by a protective film on delivery. Leave this on the furniture until it has been fully assembled and dusted. Once the protective film is removed, high-gloss elements may only be cleaned and used after 72 hours (time for post-curing in room air). Do not damage surfaces with sharp objects and never expose them to strong sunlight.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>