SW-MOTECH Speedway Pro Roadpack Noir Anthracite Instruction Manual
- October 30, 2023
- SW-MOTECH
Table of Contents
*Item No.: HTA.11.991.1000
Speedway Pro Roadpack Noir Anthracite
Instruction Manual**
Speedway Pro Roadpack Noir Anthracite
MOUNTING INSTRUCTIONS – READ AND SAVE THESE MOUNTING INSTRUCTIONS
Thank you for choosing this premium product from SW-MOTECH. Please carefully
read and understand all instructions, safety messages and warnings in this
mounting instructions prior to installation and use of this product to avoid
injury.
This product was developed for vehicles in their factory setting.
Compatibility with original accessory parts or other manufacturers’ accessory
parts is not guaranteed. Visit our webshop for additional information, such as
application charts and PDF mounting instructions. Any other documents that may
be required (e.g. ABE certifications), are also available for download at our
webshop. Keep these mounting instructions as reference.
SW-MOTECH assumes no liability for damage caused by improper installation
and/or maintenance work!
SAFETY ALERT SYMBOL
** This safety alert symbol is used throughout these mounting instructions
to warn of the possibility of death, bodily injury or other warnings. The
words DANGER, WARNING and CAUTION are used with this safety alert symbol to
convey important safety messages and information related to the installation
and use of this product. These words along with the safety alert symbol mean:
DANGER: Indicates a hazardous situation that, if not avoided, will result
in death or serious injury!
WARNING: Indicates a hazardous situation that, if not avoided, could
result in death or serious injury!
CAUTION: Indicates a hazardous situation that, if not avoided, could
result in minor or moderate injury!
NOTICE: Important information, but not death or injury related (property
damage only)!
WARNING: The installation and/or maintenance of this product requires
advanced mechanical skills, the proper tools, and a thorough understanding of
tool use and torque specifications.
For your own safety, SW-MOTECH recommends having installation and/or
maintenance carried out by a qualified and certified motorcycle mechanic.
WARNING: Should you choose to self-install this product, carefully and
completely read all intallation and safety instructions before installation
and use, and follow all the directions and safety precautions given in the
mounting instructions to avoid serious injury or death. Also pay attention to
all relevant information in the vehicle manual during intallation and use. IF
YOU DO NOT UNDERSTAND ANY PART OF THESE INSTRUCTIONS, OR NEED CLARIFICATION OF
ANY INSTRUCTION, DO NOT ATTEMT TO MOUNT THIS PRODUCT WITHOUT CONTACTING SW-
MOTECH FOR ASSISTANCE.
PREPARATION: Read the mounting instructions carefully and make sure that
all items of the parts list are included.
CAUTION: Make sure that your vehicle is parked safely and cannot fall
over. Turn off the engine and remove the ignition key. Let the engine/exhaust
cool off if necessary. Disconnect the vehicle battery when working on the
electrical system. Use appropriate tools and wear always safety glasses and
hand protection. Have another person help you.
MOUNTING: All parts and connections removed from the vehicle must be
reinstalled in accordance with the vehicle manufacturer specifications or
replaced by parts and hardware delivered by SW-MOTECH.
WARNING: Secure all threads, unless otherwise specified, with medium-
strong strength liquid thread locker. Torque specifications undefined by SW-
MOTECH must be obtained from the vehicle manufacturer or by a certified
motorcycle workshop! FUNCTION CHECK: After installation also make sure
that no moving parts are obstructed, and function of the vehicle is not
hindered in any way. Cables and hoses must not rub and/or be pinched.
WARNING:** Before starting to ride, perform a comprehensive check of all
functions. After the first 50 km and then at regular intervals, check the
tightening torque of all connections and the proper fit of the product.
Installed accessories can change driving behavior/stability of the vehicle.
Step| | Item No./ Description a| Part| Quantity b| N.m
c
---|---|---|---|---|---
| | HTA.11.991.10000| SLC Side Carrier left| |
1| (1)| HTA.11.991.901.01| Side Carrier; left| 1 /1|
| (2)| HTA.00.152.080| Guide Bolt| 3 /3|
(3)| HTA.00.152.081| Lock Bolt| 1 /1|
(4)| M6 x 20; DIN 6912| Hexagon Socket Screw, short head| 1 /1| 8
(5)| M6 x 20; DIN 7991| Countersunk Screw; black| 2 /2| 8
| | | |
3| (6)| M8 x 35; ISO 7380| Lenshead Screw; black| 1/1| 18
| | | | |
(7)| M8 x 50; DIN 6912| Hexagon Socket Screw, short head; black| 1/1| 20
(8)| 0 8,4; DIN 125| Washer; black| 1/3|
(9)| 0 16/0 8,4/h 17| Spacer; height 17 mm; black| 1/1|
| | | |
(10)| M8 x 20; DIN 933| Hexagon Screw| 2/2| 20
(11)| 0 8,4; DIN 125| Washer; black| 2/3|
| | | |
(12)| 0 6,4; DIN 9021| Washer| 2 /2|
| | | |
| | HTA.11.991.11000| SLC Side Carrier right| 1/1|
| (1)| HTA.11.991.902.01| Side Carrier; right| |
| | Mounting parts see SLC Side Carrier left| |
|
Note:
a All measurements in millimeters.
b The second number indicates the total quantity of the part in the
delivery.
c No torque specifications: Use the torque defined by vehicle
manufacturer!
The standard torque in this table can be used as long as it is within the
vehicle manufacturer’s specifications. WARNING: Always wear eye and hand
protection!
WARNING: Always use appropriate tools!
NOTICE: The mounting steps [1] to [3] show the mounting of the left side
carrier. Mount the right side carrier in the same way.
Attach the parts (2) to (5) to the side carriers (1).
WARNING: Use liquid thread locker!
Tighten the screws as specified. Remove the seat bench
Remove the shown screws, the seat lock and the fairing from the vehicle.
Attach the side carrier (1) to the vehicle.
Attach the seat lock with the original screws (Orig.) and washers (12) to the
vehicle.
WARNING: Use liquid thread locker!
Tighten the screws as specified.
Reattach the seat bench to the vehicle,
PRODUCT SPECIFIC INFORMATION
NOTICE: Observe the country-specific regulations concerning vehicle registration/operation as well as TUV regulations if applicable. If required, register installed parts in the vehicle documents through an appropriate inspection authority.
| Packed by: | Date of packaging: |
|---|
SW-MOTECH GmbH & Co. KG
Ernteweg 7-10
35282 Rauschenberg
Germany
Tel./ phone| + 49 (0)6425 / 8168 – 050
Fax / fax + 49 (016425 / 8168 – 10
inforasw-motech.com
www.sw-motech.com
Copyrignt by
SW-MATECH GmbH & Co. KG
Errors and omissions excepted.
Technical and design modifcations are subject to change.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>