VEVOR WC30 Tool Cabinet Instruction Manual
- October 30, 2023
- VEVOR
Table of Contents
Support and E-Warranty
Certificatehttps://www.vevor.com/support
INSTRUCTIONS FOR TOOL CABINET
ASSEMBLY 
MODEL:WC30
WC30 Tool Cabinet
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and doses not necessarily mean to
cover all categories of tools offered by us. You are kindly reminded to verify
carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
CustomerService@vevor.com
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our user
manual. The appearance of the product shall be subject to the product you
received. Please forgive us that we won’t inform you again if there are any
technology or software updates on our product.
Please read instructions carefully before assembly.
Warning-To reduce the risk of injury, user must read instructions manual
carefully.
Assembly Parts List
| Par | Description | Qty | |
|---|---|---|---|
| 1 | Left side panel |
| 1
2| Right side panel| 1
3| Back panel| 1
4| Top cover| 1
5| Bottom|
| 1
6| Shelf| 1
7| Door| 1
8| Wall Hang panel| 2
9| Hang top panel|
| 1
10| Hang bottom panel| 1
11| Gas spring| 2
12| Bolt-M3x6| 12
13| Bolt-M6x15|
| 34
14| Screw-ST6.338| 10
15| Rubber plug 840mm| 10
16| Positioning board| 1
Tools are required for assembly:
- Phillips screwdriver.
- Rubber mallet.
Safety Tips:
- Lay a soft cloth or paper on the floor before assembly to prevent the floor from scratching the parts.
- The maximum load of each layer after assembly is 120 LBS.
- The weight limit of each object is 40lbs
Table of Parameters
| Items | Description |
|---|---|
| Name | Tool Cabinet |
| Model | WC30 |
| External dimensions | 770×318×500 mm |
30.3×12.5×19.7 inch
Package Size| 850×590×135 mm
G.W.| 15.5 kg
Instructions for Installation
STEP 1
Insert back (3)into the buckles of left side plate(1) and right side plate(2).
Then use gelatin hammer to flap until the alignment at the top and secure them
with boltM6*15(13). 
STEP 2
Step 2: Align bottom’s(5) and hang bottom panel’s(10) holes to left and right
side panel’ bottom holes, and secure them with
(13)M6x15.
STEP 3
Do the same to top cover(4) and hang top panel(9), secure them with bolt-
M6x15(13).
STEP 4
Tilt the shelf (6) into the box, place the shelf from top to bottom, and
insert the left, right and back sides of the shelf into the left and right
side panels and the backplane hanging brackets at the appropriate height. The
installation is complete.
STEP 5
As shown in the figure, first insert the dowel on the top left of the door
into the left side panel hole, and then insert the dowel on the top right of
the door into the right panel hole.
STEP 6
Before installing the gas spring (11), it is necessary to disassemble the
spring support (as shown in the figure), install the base and the pressure rod
of the support on the door panel and the box body respectively, lock and fix
them with the 11-word large flat head screw M3x6, and then fix the base and
pressure rod of the spring support with the removed screws.
STEP 7
As shown in the figure, first paste the positioning board (16) on the wall to
draw the positioning line and drill holes, then install the rubber plug (15)
into the wall with drilled holes, and then align the mounting hole of the wall
hang plate(8) with the installation hole of the rubber plug and use the screw-
ST6.3×38(14)to lock and fix .
Manufacturer：Zhongshan City CYZ Coating Tech.Co.,Ltd.
Address：Plant1,No.78,Zhongheng Avenue,Baoyu Village, Henglan Town,
Zhongshan City,Guangdong Province,China
MADE IN CHINA
Support and E-Warranty Certificate https://www.vevor.com/support