HOME ACCENTS Holiday 22PG90181 Pre-Lit LED Wesley Long Needle Pine Artificial Christmas Tree Instruction Manual
- October 30, 2023
- HOME ACCENTS Holiday
Table of Contents
HOME ACCENTS Holiday 22PG90181 Pre-Lit LED Wesley Long Needle Pine
Artificial Christmas Tree
Product Information
The Christmas Tree Model 22PG90181 is a seasonal product designed for indoor use. The package includes a tree stand, tree top, tree center stickers (4), and three sections of the tree. The tree is designed with an eye bolt for securing the tree pole and has a foot pedal on/off switch for easy operation. The tree is compatible with a power adapter or power cord plug.
Safety Information
IMPORTANT SAFETY INSTRUCTIONS: When using electrical products, basic precautions should always be followed, including the following:
- READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
- Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
- This seasonal product is not intended for permanent installation or use.
- Do not mount or place the product near gas or electric heaters, fireplaces, candles, or other similar sources of heat.
- Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
- Do not let lamps rest on the supply cord or on any wire.
- Unplug the product when leaving the house, when retiring for the night, or if left unattended.
- This is an electric product and not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it.
- Do not use this product for other than its intended use.
- Do not hang ornaments or other objects from cord, wire, or light string.
- Do not close doors or windows on the product or extensions cords as this may damage the wire insulation.
- Do not cover the product with cloth, paper, or any material that is not a part of the product when in use.
- This product is equipped with push-in type lamps. Do not twist lamps.
- Read and follow all instructions that are on the product or provide with the product.
- SAVE THESE INSTRUCTIONS
Pre-Assembly
Package Contents
| Part | Description | Quantity |
|---|---|---|
| A | Tree top | 1 |
| B | Tree center, Sticker 4 | 1 |
| C | Tree center, Sticker 3 | 1 |
| D | Tree center, Sticker 2 | 1 |
| E | Tree center, Sticker 1 | 1 |
| F | Tree stand | 1 |
Assembly
Assembling the tree stand
- Pull apart the legs of the stand so that they are snapped into an x-shape, place the tree stand on a level surface.
- When inserting the bottom section of the tree into the assembled stand, insert and turn the eyebolts into the stand and tighten until the tree pole is firmly secured.
To close the stand, remove the eyebolts, press the metal button and fold the
legs together.
Assembling the tree
This tree assembles with Quick Set® feature
Set up and light up your tree in less than 10 minutes!
- Remove the protective caps from the tree bottom and insert the pole into the tree stand.
- Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
- Shape the branches to your preference by working from the bottom to the top. When adjusting branches, ensure that all wires are free of branch hinges.
- Insert the adapter into the wall outlet. All your lights should now be lit.
- Shape the tree from the bottom to the top. Start with the branches farthest from the pole fan out in a star shape, and continue until the entire tree is shaped.
- When finished shaping the branches, slightly upsweep all branch tips for a uniform look.
LAMP REPLACEMENT
- Grasp the power adapter or power cord plug, and than unplug from the power outlet. Do not pull the power cord.
- Lift up lamp lock tab, then pull the lamp and plastic lamp base straight out of the lamp-holder.
- Replace with a new spare lamp provided with this product. (Reference figure only)
Operation
Turning on the tree
NOTE: If some bulbs do not light or flicker, search for any loose plugs and/or broken, loose, or missing bulbs. Replace bulbs promptly with the replacement bulbs provided in order to maintain the performance and life expectancy of your tree.
- Connect the light strings of the tree together and plug the adapter into a wall outlet.
- If the tree comes with a foot pedal, step on the On/Off button.
Maintenance
Spare parts
This tree package includes hinge pins, washers and bulbs for any replacement
or repair that you need to perform on your tree. If extra parts are needed,
contact the Customer Service Team at 1-855-HDHoliday (1-855-434-6543) from 8am
to 7pm EST, Monday through Friday, and 9am to 6 pm EST, Saturday.
Repairing Loose Hinges
- Place the branch into the slot of the bracket
- Insert a new hinge pin through the holes of the bracket and secure with a washer.
Use and Care Instructions
- Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
- Before disassembling the tree, unplug the tree and remove all ornaments and decorations.
- Gently lift the tree top straight up to remove from the center section and fold all branches towards the pole.
- Repeat this step for the center and bottom tree sections.
- When storing the product, carefully remove the product from wherever it is placed, including tree, branches, or bushes, to avoid any un-due strain or stress on the product conductors, connections, and wires. Cover the protective cap on the poles to avoid damaging the internal parts.
- When not in use, store neatly in a cool, dry location protected from sunlight.
CAUTION: Use only power adapter that was provided with this product. Using a different power adapter will damage the lights and cause fire, electrical shock hazard.
Troubleshooting
| Problem | Solution |
|---|---|
| The tree does not light | Ensure that all tree sections are plugged into each |
other and that the tree is plugged into the wall. If your tree came with a
foot pedal, step on the On/Off button.
Check for loose, broken, or missing bulbs and replace as needed with the
replacement bulbs provided
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>