HOME ACCENTS Holiday 1005356632 7.5ft Jackson Fir Micro Dot Tree Instruction Manual
- October 30, 2023
- HOME ACCENTS Holiday
Table of Contents
7.5ft Jackson Fir Micro Dot Tree
SKU# 1005356632
Instruction Manual
Safety Information
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed
including the following:
a) READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
b) This product is for indoor use only. The electrical rating 0.57 A 120
V 60Hz.
c) Do not use seasonal products outdoors unless marked suitable for
indoor and outdoor use. When products are used in outdoor applications,
connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If
one is not provided, contact a qualified electrician for proper installation.
d) This seasonal use product is not intended for permanent installation
or use.
e) Do not mount or place near gas or electric heaters, fireplace, candles
or other similar sources of heat.
f) Do not secure the wiring of the product with staples or nails, or
place on sharp hooks or nails.
g) Do not let lamps rest on the supply cord or on any wire.
h) Unplug the product when leaving the house, or when retiring for the
night, or if left unattended.
i) This is an electric product – not a toy! To avoid risk of fire, burns
personal injury and electric shock it should not be played with or placed
where small children can reach it.
j) Do not use this product for other than its intended use.
k) Do not hang ornaments or other objects from cord, wire, or light
string.
l) Do not close doors or windows on the product or extension cords as
this may damage the wire insulation.
m) Do not cover the product with cloth, paper or any material not part of
the product when in use.
n) Do not move the tree by pulling the tree tips or tree branches.
o) Read and follow all instructions that are on the product or provided
with the product.
p) SAVE THESE INSTRUCTIONS.
Pre-Assembly
Package Contents
Assembly
Assembling the tree stand
Step 1. Choose a location near a wall outlet.
Step 2. Open the stand to a 90 degree angle until the hole lines up with
the hole on the tube.
Step 3. Screw an eye bolt into the hole. 
CAUTION! – ALWAYS UNPLUG YOUR TREE FROM ITS POWER SOURCE BEFORE
ASSEMBLING OR DISASSEMBLING.
Assembling the tree
Please remove protective covers from the base of the pole for each tree
section before assembling.
Step 1. Carefully insert bottom section (C) of tree into tree base and
tighten the screw. (See Fig. 1)
Step 2. Insert the middle section (B) of the tree into the bottom section
(C). (See Fig. 2)
Step 3. Insert the top section (A) into the middle section (B). (See Fig.
3)
Step 4. Allow branches to fall into place or gently pull branches up and
out.
When adjusting branches be sure that all wires are free of branch hinges. (See
Fig. 4)
Step 5. Shape the branches. Starting with tips closest to the pole, shape
one tip to the right, one to the left and one at the center of the main stem.
Repeat pattern for each branch. (See Fig. 5)
Step 6. Plug the well-connected power cord from the tree section (C) into
a proper outlet. 
Step 7. Please note this tree comes with a foot pedal switch and
a remote control for easy illumination and changing functions.
This tree is Color Changing, the 8 lighting options available are:
- Steady Warm White
- Flashing Warm White
- Fade In and Fade Out Warm White
- Steady Multicolor
- Flashing Multicolor
- Fade In and Fade Out Multicolor
- Sequential Multicolor & Warm White
- Color Changing
These functions can be changed by pressing the foot pedal switch or using the remote control. Please see the instructions of remote control below.
Operation
Turning on the tree
Step 1. Plug the well-connected power cord from the tree section (C) into
a proper outlet.
Step 2. Press the remote control or foot pedal switch to choose
functions.
Instructions of Remote Control
Please note this tree has a remote control.
Please pull out the insulation tape from the remote control, before starting
to use it. 1. Press Fn button, the function below cycle. Press the number key,
select from the following corresponding lighting functions:
Function 1: Steady Warm White
Function 2: Flashing Warm White
Function 3: Fade In and Fade Out Warm White
Function 4: Steady Multicolor
Function 5: Flashing Multicolor
Function 6: Fade In and Fade Out Multicolor
Function 7: Sequential Multicolor & Warm White
Function 8: Color Changing
There is memory mode on function adjustment. If the remote control does not
work, check whether the battery of the remote control is out of power. To
replace the remote control battery:
- Replace with a new button cell “CR2025” (3 volt) into the compartment.
CAUTION: DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.
CAUTION:
- The product consists of non-replaceable LED lamps. To reduce the risk of fire or electric shock, do not attempt to replace lamps or modify string.
- This product can only be used with the original adapter, not other brands of adapter.
Use and Care Instructions
a) Before using or reusing, inspect product carefully. Discard any
products that have cut , damaged, or frayed wire insulation or cords, cracks
in the lampholders or enclosures, loose connections, or exposed copper wire.
b) When storing the product, carefully remove the product from wherever
it is placed, including tree, branches, or bushes, to avoid any undue strain
or stress on the product conductors, connections, and wires.
c) When not in use, store neatly in a cool, dry location protected from
sunlight.
Care and Cleaning
Step 1. Remove all ornaments and decorations.
Step 2. Unplug the cord from the wall outlet.
Step 3. Gently lift the tree top straight up to remove from the center
section and fold all branches towards the pole.
Step 4. Repeat this step for the center and bottom tree sections.
Step 5. Carefully place all tree sections into a shipping box and tape it
shut.
Step 6. Store your tree in a cool, dry place away from sunlight.
Troubleshooting
| Problem | Solution |
|---|---|
| The tree does not light | Ensure that all tree sections are connected into each |
other well by pressing each section down and rotating.
Make sure power cord plug is securely inserted into a working electrical
outlet.
If you are still experiencing problems with the tree please call
1-855-HDHOLIDAY (1-855-434-6543) for instructions.
Loose branches
If a branch of the tree falls off, follow the steps below to reinstall it with
a spare rivet (G).
- Place the branch into the slot of the bracket.
- Insert a spare rivet through the hole and use diagonal pliers (not included) to crimp the rivet. (See Fig. A)
This device
complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Warning: Please note that changes or modifications of this product is not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARRANTY
3-year Limited Warranty
This product carries a three (3) year warranty against defects in workmanship
and materials. This product is not guaranteed against wear or breakage due to
misuse and/or abuse.
Date Code: 04012022_2008499
Importer: The Home Depot
Address: 2455 PACES FERRY ROAD ATLANTA, GA 30339
Tel: 1-855-HDHOLIDAY (1-855-434-6543)
Adapter Model No. TS-24WLF12V
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>