V I V O STAND-V001C Single Monitor Desk Mount Instruction Manual
- October 30, 2023
- V I V O
Table of Contents
STAND-V001C Single Monitor Desk Mount
Product Information: Single Monitor Desk Mount
The Single Monitor Desk Mount is a product designed to hold a monitor and free up desk space. The product comes with a VESA plate, bracket, clamp, pole, pole cap, cable clip, grommet base, pads, thumbscrew, 4mm Allen wrench, 6mm Allen wrench, bolts, M-A to M-F bolts and washers. The mount has two options for installation: Desk Clamp Installation or Grommet Base Installation. The mount can hold up to 17.6lbs (8kg) and is available with SKU: STAND-V001C.
Product Usage Instructions
- Attach the pole cap (E) to the top of the pole (D).
- For Desk Clamp Installation, assemble the pole (D) to the clamp base (C) with bolts (I) using the 4mm Allen key (L). Attach pads (H) and clamp to the desktop. For Grommet Base Installation, remove the screw from clamp bolt and attach pads (H) to grommet base (G). Align pin on top of grommet base (G) with the small hole on the bottom of pole (D), position over hole in desktop, and attach to desktop using clamp bolt and grommet plate (J).
- Attach bracket (B) and cable clip (F) to pole (D). Fasten the bolt with the supplied 6mm Allen wrench (M).
- For flat back monitor, attach VESA plate (A) to monitor using bolts (M-A) or (M-C) and washers (M-E). For curved back monitor, attach VESA plate (A) to monitor using bolts (M-B) or (M-D), washers (M-E), and spacers (M-F).
- Slide the monitor onto the head of bracket (B). Attach thumb screw (K). Make sure the screw is attached before you rotate the monitor.
- If needed, adjust the bolt on the side of the hinge behind the VESA plate to tighten or loosen the tilt angle using the 6mm Allen wrench (M).
- Manage the cables using the attached cable clips.
- Store the Allen wrenches in cable clip (F) for future use.
Note that the mount has a weight capacity of 17.6lbs (8kg) and it is important not to exceed this limit as it may result in serious injury. The package also contains small parts that are not suitable for children under three years old and adult supervision is required. For any damaged or defective parts, please contact the manufacturer immediately for replacement.
SKU: STAND-V001C
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
https://vivo-us.com/products/stand-v001c
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
www.vivo-us.com Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed
weight capacity.
We cannot be liable for damage or injury caused by improper mounting,
incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT
TIPOVER:
- NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.
- USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS
REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED 
ASSEMBLY STEPS
STEP 1
Attach pole cap (E) to top of pole (D).
STEP 2
-
OPTION A: Desk Clamp Installation
Assemble pole (D) to clamp base (C) with bolts (I) using 4mm Allen key (L). Attach pads (H), and clamp to desktop.
-
OPTION B: Grommet Base Installation
Remove screw from clamp bolt, and remove clamp bolt from clamp (C). Attach pads (H) to grommet base (G). Align pin on top of grommet base (G) with the small hole on the bottom of pole (D), position over hole in desktop, and attach to desktop using clamp bolt and grommet plate (J).
STEP 3
Attach bracket (B) and cable clip (F) to pole (D). Fasten the bolt with the
supplied 6mm Allen wrench (M). 
STEP 4
-
OPTION A: Flat Back Monitor
For flat back monitor, attach VESA plate (A) to monitor using bolts (M-A) or (M-C) and washers (M-E).
-
OPTION B: Curved Back Monitor
For curved back monitor, attach VESA plate (A) to monitor using bolts (M-B) or (M-D), washers (M-E), and spacers (M-F).
STEP 5
Slide the monitor onto the head of bracket (B). Attach thumb screw (K). Make
sure the screw is attached before you rotate the monitor. 
STEP 6
If needed, adjust the bolt on the side of the hinge behind the VESA plate to
tighten or loosen the tilt angle using the 6mm Allen wrench (M). 
STEP 7
Manage the cables using the attached cable clips. 
STEP 8
Store the Allen wrenches in cable clip (F) for future use. 
Adjust as Desired
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com AVG. RESOLUTION
TIME (within office hrs): < 15 M
Chat live with an agent!
AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Single Monitor Desk Mount – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>