kobi Light 18W LED Defender Instruction Manual
- June 15, 2024
- kobi Light
Table of Contents
**kobi Light 18W LED Defender
**
Instruction for use
The LED light source can only be replaced by qualified personnel.
Product: LED DEFENDER 18W / LED DEFENDER 24W
Parameters: 230V, 50Hz Fixture includes lights sources of energy class: D
ATTENTION
- Devices with visible damage to the enclosure or the power supply line must not be installed.
- During installation, disconnect the power supply and follow Occupational Safety and Health regulations.
- A properly installed device may only be connected to a properly operating electrical installation.
- The electrical connection must be performed by a specialist holding an appropriate authorisation for electrical works.
- If installed and operated properly, the device is highly resistant to water and dust.
- The device may be installed directly on the normally flammable surface (i.e. ignition temperature of the surface at least 200ºC, does not deform and soften at this temperature, e.g. wood and wood derivatives, thickness above 2mm) or on a non flammable surf ace (i.e. not supporting fire, e.g. metal, gypsum, concrete).
- Light source of th is fixture is unchangeable. When light source is used up, please replace whole lighting fixture.
- We reserve the right to introduce technical modifications.
- Keep the instruction manual.
References
Read User Manual Online (PDF format)
Loading......