HOME ACCENTS Holiday 22RT1932214 48 Inch LED 70 Light Warm White Gift Stacking Snowman Instruction Manual
- October 30, 2023
- HOME ACCENTS Holiday
Table of Contents
HOME ACCENTS Holiday 22RT1932214 48 Inch LED 70 Light Warm White Gift
Stacking Snowman
Thank you!
We appreciate the trust and confidence you have placed in Home Accents through
the purchase of this 48in LED 70 Light Warm White Gift Stacking Snowman. We
strive to continually create quality products designed to enhance your home.
Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Home Accents!
- 1-855-HDHoliday (1-855-434-6543) HOMEACCENTSHOLIDAY.COM
Parts List
Locater| Name| Qty.
A| Hat / Head| 1
B| Body| 1
C| Arm| 2
D| Leg / Foot| 2
E
| Bottom and Middle
Gift Box
| ****
1
F| Top Gift Box| 1
G| Base Stand| 1
H| Support Bar| 1
Hardware List
Locater| Name| Qty.
I| Cotter Pin| 2
J| Spare Bulb| 4
K| Spare Fuse| 4
L| Plastic Tie| 15
M| Ground Stake| 4
USE AND CARE GUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many
parts are connected by the lighting string that runs throughout the item. Take
special care not to pull, cut or damage the lighting string. Read the entire
manual prior to assembly and identify all the parts included in the package
against the parts list. It is recommended to assemble parts of the product
while laying flat on the ground or table versus standing the item up to
assemble the parts. If any parts are missing or damaged do not attempt
assembly but contact our customer service center or return to place of
purchase with purchase receipt. Assembly of this product may require more than
one person. 1-855-HDHoliday (1-855-434-6543）
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source. Do not
unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 4.8 Watts (0.04
Amps). Do not overload. Do not connect to another lighting string, decorative
outfit or other electrical products. Before you use or re-use this product
inspect it carefully. Discard or return to place of purchase with purchase
receipt if the product has cuts, damage, frayed wire insulation on cords,
cracks in the socket enclosures, loose connections, exposed copper wire or
other obvious damage.
Care and Cleaning
- Carefully remove the product from wherever it is placed. This helps to avoid any undue strain or stress on the product connections, and wires. If the product is placed somewhere other than the ground it should be well secured, flat and stable.
- Carefully disassemble the unit taking caution not to cut any electrical wires.
- Wipe the unit with a damp cloth and allow the unit to dry before storing.
- Store the product neatly in a cool, dry location protected from sunlight.
Troubleshooting
- Ensure that the floor or surface that the item sits on is flat and level
- Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
- Ensure all parts are assembled properly per the Instruction Manual
- If the item does not light check for loose or broken bulbs and connections
- Do not plug into other electrical items
- If the item has multiple Light String Cords be sure to plug in all cords
- Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year.
This product is covered by a 90 days limited guarantee due to defects in
material and workmanship. Return the product with purchase receipts to the
location of purchase for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products
not used in accordance with directions provided on or with the product, burn
out of bulbs or LEDS, batteries, products that have been subjected to
unauthorized repair and/or modification and damage caused by shipping and
improper handling, alterations, misuse, in store display models or accidents.
Questions, problems, missing parts? Before returning to the store, call Home
Accents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
1-855-HDHoliday (1-855-434-6543)
Diagram of Parts
ASSEMBLY
Assembling the Head to Body
Insert the connecting rods on the bottom of Head (A) into connecting holes on
the top of the Body (B) then fasten together at the connecting loops with the
Plastic Ties (L).
Assembling the Snowman to Base Stand
Insert the connecting rods on the Base Stand (G) into connecting holes on the
bottom of the Leg / Foot (D) then fasten together at the connecting loops with
the Plastic Tie (L).
Assembling the Support Bar
Insert each hooked end of the Support Bar (H) into the matching connecting
holes on the back of the Body (B) and the Base Stand (G) then secure with the
Cotter Pins (I).
Assembling the Gift Box
Insert the connecting rods on the bottom of the Top Gift Box (F) into the
connecting holes on the top of the Middle Gift Box (E). Insert the connecting
rod of Base Stand (G) into the connecting hole on the bottom of Bottom Gift
Box (E) then secure at the connecting loops of Snowman’s Body (B) and Gift Box
(E) with Plastic Tie (L).
Assembling the Arms
Insert the connecting rods on each Arm (C) into the matching connecting holes
on the Body (B). Secure at the connecting loops of Arms (C) and Gift Box (E)
with Plastic Ties (L).
Assembling the Ground Stakes
Secure the Snowman and Gift Box to the ground with the Ground Stakes (M) at
the ground connecting loops on the Snowman and Gift box base.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>