V I V O MOUNT-MM01B Pneumatic Spring Mantle Wall TV Mount Instruction Manual
- October 30, 2023
- V I V O
Table of Contents
V I V O MOUNT-MM01B Pneumatic Spring Mantle Wall TV Mount
SKU: MOUNT-MM01B
This product is a TV mount that can be used both on wood and concrete/brick
walls. It has a weight capacity of 11-88 lbs (5-40 kg) and a pneumatic spring
arm that allows easy adjustment of the TV position. The package includes all
the necessary hardware for installation on different types of walls and TV
models.
For more information and helpful videos, please scan the QR code with your
mobile device or visit https://vivo-us.com/products/mount-mm01b.
WARNING!
Please read the following instructions and warnings carefully before installing this product:
- Do not install into drywall alone. Verify your wall construction. Use wood studs to mount. We include mounting for brick and concrete walls. If unsure, please contact us at help@vivo-us.com, or call us at 309-278-9303.
- Do not exceed weight capacity. Failure to do so may result in serious injury.
- This product contains small parts that can be a choking hazard for children under 3 years. Adult supervision is required.
PACKAGE CONTENTS
- (x1) Arm (A)
- (x1) TV Plate (B)
- (x2) Plastic Cover (C)
- (x2) VESA Bracket (D)
- (x3) M6 Nut (S-A)
- (x4) M6x14mm Screw (M-A)
- (x4) M8x15mm Screw (M-B)
- (x4) M6x30mm Screw (M-C)
- (x4) M8x35mm Screw (M-D)
- (x4) M8 Washer (M-E)
- (x4) Small Spacer (M-F)
- (x4) Large Spacer (M-G)
- (x5) ST8x90mm Screw (W-A)
- (x5) Concrete Anchor (W-B)
- (x4) M8 Washer (W-C)
- (x1) 4mm Allen Wrench
- (x1) 6mm Allen Wrench
- (x1) Wrench (T-C)
Tools needed: drill, Phillips screwdriver, pencil, level.
Note: not all hardware included will be used.
ASSEMBLY STEPS
-
While holding Arm (A) closed, cut the zip tie and gently release Arm (A).
-
Option A: Wood Wall Installation
Use Arm (A) to mark mounting holes on wall where the stud is located.
The use of a stud finder and level is highly recommended. Using a 15/64 (6mm) drill bit, drill holes at least 3.54 (90mm) deep into marked locations. Insert ST8x90mm Screw (W-A) into the top hole, leaving 6mm of thread exposed. Hang the top hole in Arm (A) over the screw, and secure using two more ST8x90mm Screws (W-A) with M8 Washers (W-C). -
Option B: Concrete/Brick Wall Installation
Use Arm (A) to mark mounting holes on the wall. The use of a stud finder and level is highly recommended. Using a 12/25 (12mm) drill bit, drill holes at least 3.74 (95mm) deep into marked locations. Press Concrete Anchors (W-B) into holes, then insert ST8x90mm Screws (W-A) into the top hole, leaving 6mm of thread exposed. Hang the top hole in Arm (A) over the screw, and secure using four more ST8x90mm Screws (W-A) with M8 Washers (W-C). -
Attach Plastic Covers (C) to Arm (A).
-
Assemble TV Plate (B) to Arm (A) using M6 Nuts (S-A) and Wrenchv (T-C).
-
Remove Screws (D1) from VESA Brackets (D) and set them aside. Attach VESA Brackets (D) to the back of the monitor using screws (M-A through
M-E) and M8 Washers (M-E). If screws are too long, spacers (M-F,
M-G) may be required. -
Hang VESA Brackets (D) over TV Plate (B) and secure using Screws (D1).
-
Adjust the tension of Arm (A) using 6mm Allen Wrench (T-B). Turn 6mm Allen Wrench (T-B) clockwise to decrease tension, and counterclockwise to increase.
-
Remove the bottom cover from Arm (A). Organize cables and re-attach the cover.
-
Adjust the tilt using a 4mm Allen Wrench (T-A) and the rotation using Wrench (T-C).
To use the Pneumatic Spring Mantle / Wall TV Mount, follow these steps:
- Determine the type of wall you will be mounting the TV on. If it is a wood wall, follow Option A in the assembly steps. If it is a concrete/brick wall, follow Option B.
- Assemble the Arm (A) and attach it to the wall following the instructions in Steps 1-3.
- Attach the TV Plate (B) to the Arm (A) using M6 Nuts (S-A) and Wrench (T-C), as described in Step 4.
- Attach the VESA Brackets (D) to the back of your TV using screws (M-A through M-E) and M8 Washers (M-E). If screws are too long, spacers (M-F, M-G) may be required, as explained in Step 5.
- Hang the VESA Brackets (D) over the TV Plate (B) and secure using Screws (D1), as described in Step 6.
- Adjust the tension of Arm (A) using 6mm Allen Wrench (T-B), as explained in Step 7.
- Organize cables and re-attach the bottom cover of Arm (A), as described in Step 8.
- Adjust the tilt using a 4mm Allen Wrench (T-A) and the rotation using Wrench (T-C), as explained in Step 9.
SKU : MOUNT-MM01B
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product. Instruction Manual
https://vivo-us.com/products/mount-mm01b
GET IN TOUCH
Monday-Friday from 7:00 am-7:00 pm CST
- help@vivo-us.com
- www.vivo-us.com
- 309-278-5303
Chat live with an agent!
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
PACKAGE CONTENTS
TOOLS NEEDED
NOTE : NOT ALL HARDWARE INCLUDED WILL BE USED
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD
STUDS TO MOUNT. We include mounting for brick and concrete walls. If unsure,
please contact us at vivo-us.com, email at help@vivo-us.com, or call us at
309-278-9303
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED
ASSEMBLY STEPS
-
While holding Arm (A) closed, cut the zip tie and gently release Arm (A).
-
Option A: Wood Wall Installation
Use Arm (A) to mark mounting holes on wall where the stud is located.
The use of a stud finder and level is highly recommended. Using a 15/64 (6mm) drill bit, drill holes at least 3.54 (90mm) deep into marked locations. Insert ST8x90mm Screw (W-A) into the top hole, leaving 6mm of thread exposed. Hang the top hole in Arm (A) over the screw, and secure using two more ST8x90mm Screws (W-A) with M8 Washers (W-C).
-
Option B: Concrete/Brick Wall Installation
Use Arm (A) to mark mounting holes on the wall. The use of a stud finder and level is highly recommended. Using a 12/25 (12mm) drill bit, drill holes at least 3.74 (95mm) deep into marked locations. Press Concrete Anchors (W-B) into holes, then insert ST8x90mm Screws (W-A) into the top hole, leaving 6mm of thread exposed. Hang the top hole in Arm (A) over the screw, and secure using four more ST8x90mm Screws (W-A) with M8 Washers (W-C).
-
Attach Plastic Covers (C) to Arm (A).
-
Assemble TV Plate (B) to Arm (A) using M6 Nuts (S-A) and Wrenchv (T-C).
-
Remove Screws (D1) from VESA Brackets (D) and set aside. Attach VESA Brackets (D) to back of the monitor using screws (M-A through M-E) and M8 Washers (M-E). If screws are too long, spacers (M-F, M-G) may be required.
-
Hang VESA Brackets (D) over TV Plate (B) and secure using Screws (D1).
-
Adjust the tension of Arm (A) using 6mm Allen Wrench (T-B). Turn 6mm Allen Wrench (T-B) clockwise to decrease tension, and counter clockwise to increase.
-
Remove the bottom cover from Arm (A). Organize cables and re-attach the cover.
-
Adjust the tilt using a 4mm Allen Wrench (T-A) and the rotation using Wrench (T-C).
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
Open Monday – Friday 7:00 am – 7:00 pm CST, our dedicated support team can
offer immediate assistance with rapid response times. If any parts are
received damaged or defective, please contact us. We are happy to replace
parts to ensure you have a fully functioning product
-
309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S
-
www.vivo-us.com AVG. RESOLUTION TIME (within office hrs): < 15 M
Chat live with an agent!
AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Pneumatic Spring Mantle / Wall TV Mount – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>