reolink FE-W 6MP WiFi 360 Degree Panoramic Fisheye Camera User Guide

: October 30, 2023
: reolink

Table of Contents

What’s in the Box
Camera Introduction
Set up the Camera
Mount the Camera
Troubleshooting
Speciﬁcations
Notiﬁcation of Compliance
Limited Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Quick Start Guide
FE-W 6MP WiFi 360 Degree Panoramic Fisheye Camera
User Guide

What’s in the Box

reolink FE W 6MP WiFi 360 Degree Panoramic Fisheye Camera -
fig

Camera Introduction

reolink FE W 6MP WiFi 360 Degree Panoramic Fisheye Camera - fig
2

Built-in Mic
Daylight Sensor
Lens
Ethernet Port
Power Port

reolink FE W 6MP WiFi 360 Degree Panoramic Fisheye Camera - fig
3

Micro SD Card Slot
Reset Button

Press the reset button with a pin to restore factory settings. 3. Speaker

Set up the Camera

Set up the Camera on Phone
Step 1 Scan to download the Reolink App from the App Store or Google Play Store.

reolink FE W 6MP WiFi 360 Degree Panoramic Fisheye Camera - qr
code https://reolink.com/wp- json/reo-v2/app/download

NOTE: If the Reolink App is already existed, please check if it is the newest; if no, please update it.

Step 2 Power on the camera.
Step 3 Launch the Reolink App. Click the “ ” button in the top right corner and scan the QR code on the camera to add it.

reolink FE W 6MP WiFi 360 Degree Panoramic Fisheye Camera - fig
4

Step 4 Follow the onscreen instructions to ﬁnish the initial setup.

Set up the Camera on PC (Optional)
Step 1 Download and install the Reolink Client. Go to https://reolink.com > Support > App & Client
Step 2 Power on the camera.
Step 3 Launch the Reolink Client. Click the “ ” button and input the UID number of the camera to add it.
Step 4 Follow the onscreen instructions to ﬁnish the initial setup.

Mount the Camera

Installation Tips

Do not face the camera towards any light sources.
Do not point the camera towards a glass window. Or, it may result in poor image quality because of the window glare by infrared LEDs, ambient lights or status lights.
Do not place the camera in a shaded area and point it towards a well-lit area. Or, it may result in poor image quality. To ensure best image quality, the lighting condition for both the camera and the capture object shall be the same.
To ensure better image quality, it’s recommended to clean the lens with a soft cloth from time to time.
Make sure the power ports are not directly exposed to water or moisture and not blocked by dirt or other elements.
Do not install the camera at places where rain and snow can hit the lens directly.

Mount the Camera to the Wall

reolink FE W 6MP WiFi 360 Degree Panoramic Fisheye Camera - fig
5

Before drilling the required holes, mark the direction of the lock printed on the mounting base. Make sure the lock is facing up, as shown in the diagram. This will help you align the mount base in the same orientation when installing.
Drill holes in accordance with the mounting hole template. Use the drywall anchors included in the package if needed. And use screws to secure the mount base to the wall with its cable groove facing downward.
Run the cable of the ﬁsheye camera through the cable groove on the mount base.
Attach the camera to the base and rotate the camera clockwise to lock it in position. Make sure the orientation arrow on the camera and the lock on the base are aligned.
If you want to remove the camera from the mount base, press the release mechanism and rotate the camera counterclockwise.

Mount the Camera to Ceiling

reolink FE W 6MP WiFi 360 Degree Panoramic Fisheye Camera - fig
8

Drill holes in accordance with the mounting hole template. Use the drywall anchors included in the package if needed.
Secure the mount base to the ceiling with screws.
Run the cable of the ﬁsheye camera through the cable groove on the mount base, and rotate the camera counterclockwise to lock it in position.

NOTE: Fit the three mounting holes of the camera into the mount base.

Troubleshooting

Infrared LEDs Stop Working
If the Infrared LEDs of your camera stop working, please try the following solutions:

Enable infrared lights on Device Settings page via Reolink App/Client.
Check if the Day/Night mode is enabled and set up auto infrared lights at night on Live View page via Reolink App/Client.
Upgrade the ﬁrmware of your camera to the latest version.
Restore the camera to factory settings and check out the infrared light settings again.

If these won’t work, contact Reolink Support https://support.reolink.com/.

Failed to Upgrade the Firmware
If you fail to upgrade the ﬁrmware for the camera, try the following solutions:

Check out the current camera ﬁrmware and see if it is the latest one.
Make sure that you download the correct ﬁrmware from Download Center.
Make sure that your PC is working on a stable network.

If these won’t work, contact Reolink Support https://support.reolink.com/.

Speciﬁcations

Hardware Features
Night Vision: 8 Meters
Day/Night Mode: Auto Switchover

General
Operating Temperature: -10°C to 55°C (14°F to 131°F)
Operating Humidity: 10%-90%
For more speciﬁcations, visit https://reolink.com/.

Notiﬁcation of Compliance

FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC RF Exposure Warning Statements
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

Simplified EU Declaration of Conformity
Reolink declares that the WiFi camera is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, the PoE camera and NVR is in compliance with Directive 2014/30/EU.

Correct Disposal of This Product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environment safe recycling.

Limited Warranty

This product comes with a 2-year limited warranty that is valid only if purchased from Reolink Official Store or a Reolink authorized reseller. Learn more: https://reolink.com/warranty-and-return/.
NOTE: We hope that you enjoy the new purchase. But if you are not satisﬁed with the product and plan to return, we strongly suggest that you reset the camera to factory default settings and take out the inserted SD card before returning.

Terms and Privacy
Use of the product is subject to your agreement to the Terms of Service and Privacy Policy at reolink.com. Keep out of reach of children.

End User License Agreement
By using the Product Software that is embedded on the Reolink product, you agree to the terms of this End User License Agreement (“EULA”) between you and Reolink.
Learn more: https://reolink.com/eula/.

ISED Statements
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency Exposure Statement for IC
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20centimeters between the radiator and your body.
NOTE: 5150-5250MHz for indoor use
OPERATING FREQUENCY(For WiFi Version) (the maximum transmitted power)

Technical Support
If you need any technical help, please visit our official support site and contact our support team before returning the products, https://support.reolink.com.

@ReolinkTech https://reolink.com