reolink 58.03.005.0010 E1 Outdoor Smart 5MP Auto Tracking PTZ WiFi Camera Instruction Manual

58.03.005.0010 E1 Outdoor Smart 5MP Auto Tracking PTZ WiFi Camera

Product Information: Reolink Lumus

The Reolink Lumus is a smart security camera designed for indoor and outdoor use. It comes with a speaker, power cable, spotlight, status LED, daylight sensor, built-in mic, PIR motion sensor, micro SD card slot, and a reset button. The camera can be set up easily with the help of a quick start guide and is compatible with smartphones and other devices. The camera can detect and alert you to any movement within its range, and also supports instant email alerts and push notifications. The device is FCC compliant and meets the essential requirements of Directive 2014/53/EU.

Product Usage Instructions

What’s in the Box
The package includes:

• Reolink Lumus camera
• Power adapter
• Camera bracket
• Mounting template
• Reset needle
• Surveillance sign
• Quick start guide
• Pack of screws

Camera Introduction
The camera has a speaker, power cable, spotlight, status LED, daylight sensor, built-in mic, PIR motion sensor, micro SD card slot, and a reset button. The camera can detect movement within its range and also supports instant email alerts and push notifications. The device is FCC compliant and meets the essential requirements of Directive 2014/53/EU.

Set up the Camera

Follow the below steps to set up the camera:

1. Connect the power adapter to the camera.
2. Place the camera in the desired location and connect it to a Wi-Fi network.
3. Download the Reolink app on your smartphone and add the camera to the app.

Installation Guide
Follow the below steps to install the camera:

1. Drill holes in accordance with the mounting template and screw the base of the bracket onto the wall.
2. Attach the other part of the bracket onto the base.
3. Fasten the camera to the bracket by turning the screw identified in the following chart anticlockwise.
4. Adjust the camera angle to get the best field of view.

Adjusting Camera Angle
To adjust the camera angle, please follow these steps:

1. Loosen the bracket by turning the upper part anticlockwise.
2. Adjust the camera angle.
3. Secure the camera by turning the part on the bracket identified in the chart clockwise.

Reducing False Alarms
To reduce false alarms, ensure that a moving object approaches the PIR sensor horizontally and not vertically. The mounting height should be between 2-3 meters, and PIR detection distance should be between 2-7 meters.

Troubleshooting
If you face any issues while using the camera, please try the following solutions:

• If your camera is not powering on, check if it is connected to a power source. If it still doesn’t work, contact Reolink support.
• If the camera failed to scan the QR code on your phone, check if the camera is connected to a Wi-Fi network. If it still doesn’t work, contact Reolink support.
• If the camera fails to connect to Wi-Fi, check if the Wi-Fi network is working properly. If it still doesn’t work, contact Reolink support.

What’s in the Box

Camera Introduction

* Press for more than five seconds to restore the device to default settings.

• Always keep the rubber plug closed firmly.

Set up the Camera
Download and launch the Reolink App or Client software, and follow the onscreen instructions to finish initial setup.

• On Smartphone
  Scan to download the Reolink App.

• On PC
  Download path of the Reolink Client: Go to https://reolink.com > Support > App & Client.

Installation Guide

• Install the camera 2-3 meters (7-10 ft) above the ground. This height maximizes the detection range of the PIR motion sensor.
• For better motion detection performance, please install the camera angularly.

NOTE: If a moving object approaches the PIR sensor vertically, the camera may fail to detect motion.

Mount the Camera

Rotate to separate parts from the bracket.

Drill holes in accordance with the mounting hole template and screw the base of the bracket onto the wall. Next, attach the other part of the bracket onto the base.

Fasten the camera to the bracket by turning the screw identified in the following chart anticlockwise.

Adjust the camera angle to get the best field of view.

Secure the camera by turning the part on the bracket identified in the chart clockwise.

NOTE: To adjust the camera angle, please loosen the bracket by turning the upper part anticlockwise.

Important Notes on Reducing False Alarms

• • Do not face the camera towards any objects with bright lights, including sunshine, bright lamp lights, etc.
  • Do not place camera near any outlets, including the air conditioner vents, humidifier outlets, the heat transfer vents of projectors, etc.
  • Do not install the camera at places with strong winds.
  • Do not face the camera towards a mirror.
  • Keep the camera at least 1 meter away from any wireless devices, including WiFi routers and phones to avoid wireless interference.

Troubleshooting

IP Cameras is not Powering on
If your camera is not powering on, please try the following solutions:

• • Plug the camera into another power outlet.
  • Use another 5V power adapter to power up the camera.

If these won’t work, please contact Reolink Support https://support.reolink.com

Failed to Scan QR Code on the Phone
If the camera failed to scan the QR code on your phone, please try the following solutions:

• Remove the protective film from the camera lens.
  Wipe the camera lens with a dry paper/towel/tissue.

• Vary the distance (about 30cm) between your camera and the mobile phone which enables the camera to focus better.

• Try to scan the QR code under sufficient lighting.

If these won’t work, please contact Reolink Support https://support.reolink.com

WiFi Connection Failed During Initial Setup
If the camera fails to connect to WiFi, please try the following solutions:

• Please make sure the WiFi band is 2.4GHz, the camera does not support 5GHz.
• Please ensure you have entered the correct WiFi password.
• Put your camera close to your router to ensure a strong WiFi signal.
• Change the encryption method of the WiFi network to WPA2-PSK/WPA-PSK (safer encryption) on your router interface.
• Change your WiFi SSID or password and make sure that SSID is within 31 characters and password is within 64 characters.
• Set your password with only characters on the keyboard.

If these won’t work, please contact Reolink Support https://support.reolink.com

Specifications

Video & Audio

• Video Resolution: 1080p HD at 15 frames/sec
• Field of View: Horizontal: 100°, Vertical: 54°Night Vision: Up to 10m (33 ft)
• Audio: Two-way audio

Smart Alarm

• Mode: Motion Detection + PIR Detection PIR Detection Angle: 100° horizontal
• Audio Alert: Customized voice-recordable alerts

Other Alerts:
Instant email alerts and push notifications

General

• Power: 5V/2A
• WiFi Frequency: 2.4 GHz
• Operating Temperature:  -10°C to 55°C (14°F to 131°F)
• Weather resistance: IP65 certified weatherproof
• Size: 99 x 91 x 60 mm
• Weight: 185g (6.5 oz)

Notification of Compliance

FCC Compliance Statement
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, includinginterference that may cause undesired operation. For more information, visit: reolink.com/fcc-compliance-notice/.

CE: Simplified EU Declaration of Conformity

Reolink declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Correct Disposal of This Product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environment safe recycling.

Limited Warranty

This product comes with a 2-year limited warranty that is valid only if purchased from Reolink Official Store or a Reolink authorized reseller. Learn more:
https://reolink.com/warranty-and-return/.

NOTE: We hope that you enjoy the new purchase. But if you are not satisfied with the product and plan to return, we strongly suggest that you reset the camera to factory default settings and take out the inserted SD card before returning.

Terms and Privacy
Use of the product is subject to your agreement to the Terms of Service and Privacy Policy at reolink.com. Keep out of the reach of children.

End User License Agreement
By using the Product Software that is embedded on the Reolink product, you agree to the terms of this End User License Agreement (“EULA”) between you and Reolink. Learn more: https://reolink.com/eula/.

ISED Radiation Exposure Statement
This equipment complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

OPERATING FREQUENCY
(the maximum transmitted power)
2412MHz—2472MHz (17dBm)

References

• ce.com
• Reolink Official: Security Cameras and Systems for Home & Business
• Reolink Official: Security Cameras and Systems for Home & Business
• Warranty & Return – Reolink
• Reolink Support - Official Reolink Help Center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>